Re: [PATCH v2 3/7] drm/amdgpu: Add new function to put GPU power profile
From: Yadav, Arvind
Date: Tue Aug 22 2023 - 08:12:05 EST
Hi Lijo,
The *_set function will set the GPU power profile and the *_put function
will schedule the
smu_delayed_work task after 100ms delay. This smu_delayed_work task will
clear a GPU
power profile if any new jobs are not scheduled within 100 ms. But if
any new job comes within 100ms
then the *_workload_profile_set function will cancel this work and set
the GPU power profile based on
preferences.
Please see the below case.
case 1 - only same profile jobs run. It will take 100ms to clear the
profile once all jobs complete.
wl = VIDEO <100ms>
workload _________|`````````````````````````````````````|____
Jobs (VIDEO) ________|```|__|```|___|````|___________
Case2 - two jobs of two different profile. job1 profile will be set but
when job2 will arrive it will be moved
to higher profile.
wl = VIDEO -> wl = COMPUTE
<100ms>
workload
___|``````````````````````````````````````````````````````````````````|____
Jobs (VIDEO) ___|```|__|```|___|````|___|````|_______
Jobs (COMPUTE) ______________|```|___|````|___|````|_________
Case3 - two jobs of two different profile. job1 profile will be set but
when job2 will arrive it will not be moved
to lower profile. When compute job2 will complete then only it will move
to lower profile.
wl = COMPUTE
-> wl = VIDEO <100ms>
workload
_________|``````````````````````````````````````````````````````````````````|____
Jobs (COMPUTE) ____|```|__|```|___|````|___|````|_______
Jobs (VIDEO) ___________________|```|___|````|___|````|___|````|___________
On 8/22/2023 10:21 AM, Lazar, Lijo wrote:
On 8/21/2023 12:17 PM, Arvind Yadav wrote:
This patch adds a function which will clear the GPU
power profile after job finished.
This is how it works:
- schedular will set the GPU power profile based on ring_type.
- Schedular will clear the GPU Power profile once job finished.
- Here, the *_workload_profile_set function will set the GPU
power profile and the *_workload_profile_put function will
schedule the smu_delayed_work task after 100ms delay. This
smu_delayed_work task will clear a GPU power profile if any
new jobs are not scheduled within 100 ms. But if any new job
comes within 100ms then the *_workload_profile_set function
will cancel this work and set the GPU power profile based on
preferences.
v2:
- Splitting workload_profile_set and workload_profile_put
into two separate patches.
- Addressed review comment.
Cc: Shashank Sharma <shashank.sharma@xxxxxxx>
Cc: Christian Koenig <christian.koenig@xxxxxxx>
Cc: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Arvind Yadav <Arvind.Yadav@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_workload.c | 97 +++++++++++++++++++
drivers/gpu/drm/amd/include/amdgpu_workload.h | 3 +
2 files changed, 100 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_workload.c
b/drivers/gpu/drm/amd/amdgpu/amdgpu_workload.c
index e661cc5b3d92..6367eb88a44d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_workload.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_workload.c
@@ -24,6 +24,9 @@
#include "amdgpu.h"
+/* 100 millsecond timeout */
+#define SMU_IDLE_TIMEOUT msecs_to_jiffies(100)
+
static enum PP_SMC_POWER_PROFILE
ring_to_power_profile(uint32_t ring_type)
{
@@ -59,6 +62,80 @@ amdgpu_power_profile_set(struct amdgpu_device *adev,
return ret;
}
+static int
+amdgpu_power_profile_clear(struct amdgpu_device *adev,
+ enum PP_SMC_POWER_PROFILE profile)
+{
+ int ret = amdgpu_dpm_switch_power_profile(adev, profile, false);
+
+ if (!ret) {
+ /* Clear the bit for the submitted workload profile */
+ adev->smu_workload.submit_workload_status &= ~(1 << profile);
+ }
+
+ return ret;
+}
+
+static void
+amdgpu_power_profile_idle_work_handler(struct work_struct *work)
+{
+
+ struct amdgpu_smu_workload *workload = container_of(work,
+ struct amdgpu_smu_workload,
+ smu_delayed_work.work);
+ struct amdgpu_device *adev = workload->adev;
+ bool reschedule = false;
+ int index = fls(workload->submit_workload_status);
+ int ret;
+
+ mutex_lock(&workload->workload_lock);
+ for (; index > 0; index--) {
Why not use for_each_set_bit?
We are clearing which we have only set it. We will clear first higher
profile then lower.
+ int val = atomic_read(&workload->power_profile_ref[index]);
+
+ if (val) {
+ reschedule = true;
Why do you need to do reschedule? For each put(), a schedule is
called. If refcount is not zero, that means some other job has already
set the profile. It is supposed to call put() and at that time, this
job will be run to clear it anyway, right?
Yes, I have got the comment for this I am going to remove this.
Noted.
+ } else {
+ if (workload->submit_workload_status &
+ (1 << index)) {
+ ret = amdgpu_power_profile_clear(adev, index);
+ if (ret) {
+ DRM_WARN("Failed to clear workload %s,error =
%d\n",
+ amdgpu_workload_mode_name[index], ret);
+ goto exit;
+ }
+ }
+ }
+ }
+ if (reschedule)
+ schedule_delayed_work(&workload->smu_delayed_work,
+ SMU_IDLE_TIMEOUT);
+exit:
+ mutex_unlock(&workload->workload_lock);
+}
+
+void amdgpu_workload_profile_put(struct amdgpu_device *adev,
+ uint32_t ring_type)
+{
+ struct amdgpu_smu_workload *workload = &adev->smu_workload;
+ enum PP_SMC_POWER_PROFILE profile =
ring_to_power_profile(ring_type);
+
+ if (profile == PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT)
+ return;
+
+ mutex_lock(&workload->workload_lock);
+
+ if (!atomic_read(&workload->power_profile_ref[profile])) {
+ DRM_WARN("Power profile %s ref. count error\n",
+ amdgpu_workload_mode_name[profile]);
+ } else {
+ atomic_dec(&workload->power_profile_ref[profile]);
+ schedule_delayed_work(&workload->smu_delayed_work,
+ SMU_IDLE_TIMEOUT);
+ }
+
+ mutex_unlock(&workload->workload_lock);
+}
+
void amdgpu_workload_profile_set(struct amdgpu_device *adev,
uint32_t ring_type)
{
@@ -70,13 +147,30 @@ void amdgpu_workload_profile_set(struct
amdgpu_device *adev,
return;
mutex_lock(&workload->workload_lock);
+ cancel_delayed_work_sync(&workload->smu_delayed_work);
This is a potential deadlock. You already hold the mutex and then
waiting for idle work to finish. Idle work could now be at the point
where it is waiting for the same mutex. Suggest not to call cancel
here and let the mutex take care of the sequence.
We cannot cancel if idle work is running. So we have to wait until ideal
work is complete. If *put function arrived before ideal work is not
stated then we can cancel it. but if it is running work thread we should
wait.
ret = amdgpu_power_profile_set(adev, profile);
if (ret) {
DRM_WARN("Failed to set workload profile to %s, error = %d\n",
amdgpu_workload_mode_name[profile], ret);
+ goto exit;
+ }
+
+ /* Clear the already finished jobs of higher power profile*/
+ for (int index = fls(workload->submit_workload_status);
+ index > profile; index--) {
+ if (!atomic_read(&workload->power_profile_ref[index]) &&
+ workload->submit_workload_status & (1 << index)) {
+ ret = amdgpu_power_profile_clear(adev, index);
+ if (ret) {
+ DRM_WARN("Failed to clear workload %s, err = %d\n",
+ amdgpu_workload_mode_name[profile], ret);
+ goto exit;
+ }
+ }
If you follow the earlier comment, that will keep this logic only at
one place - i.e, at idle work handler. Basically just let the idle
work handle its duty. If some job starts running during the clear
call, it's just unfortunate timing and let the next set() take the
lock and request profile again.
So basically for every millisecond new jobs are coming and completing
it to the same or different profile . Suppose we are running higher
profile jobs and before it completes if a lower job arrives, this check
will help to move the higher profile to lower profile once higher
profile finishes it. If we are not checking here then it will stuck on
higher profile until then other jobs will also not complete. Please
refer case3 scenario.
Thanks,
Lijo
}
+exit:
mutex_unlock(&workload->workload_lock);
}
@@ -87,6 +181,8 @@ void amdgpu_workload_profile_init(struct
amdgpu_device *adev)
adev->smu_workload.initialized = true;
mutex_init(&adev->smu_workload.workload_lock);
+ INIT_DELAYED_WORK(&adev->smu_workload.smu_delayed_work,
+ amdgpu_power_profile_idle_work_handler);
}
void amdgpu_workload_profile_fini(struct amdgpu_device *adev)
@@ -94,6 +190,7 @@ void amdgpu_workload_profile_fini(struct
amdgpu_device *adev)
if (!adev->smu_workload.initialized)
return;
+ cancel_delayed_work_sync(&adev->smu_workload.smu_delayed_work);
adev->smu_workload.submit_workload_status = 0;
adev->smu_workload.initialized = false;
mutex_destroy(&adev->smu_workload.workload_lock);
diff --git a/drivers/gpu/drm/amd/include/amdgpu_workload.h
b/drivers/gpu/drm/amd/include/amdgpu_workload.h
index 5022f28fc2f9..ee1f87257f2d 100644
--- a/drivers/gpu/drm/amd/include/amdgpu_workload.h
+++ b/drivers/gpu/drm/amd/include/amdgpu_workload.h
@@ -46,6 +46,9 @@ static const char * const
amdgpu_workload_mode_name[] = {
"Window3D"
};
+void amdgpu_workload_profile_put(struct amdgpu_device *adev,
+ uint32_t ring_type);
+
void amdgpu_workload_profile_set(struct amdgpu_device *adev,
uint32_t ring_type);