Re: [PATCH v5 1/5] dt-bindings: PCI: brcmstb: Add brcm,enable-l1ss property

[Manivannan Sadhasivam]

On Mon, May 08, 2023 at 06:01:21PM -0400, Jim Quinlan wrote:
> This commit adds the boolean "brcm,enable-l1ss" property:
> 
>   The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
>   requires the driver probe() to deliberately place the HW one of three
>   CLKREQ# modes:
> 
>   (a) CLKREQ# driven by the RC unconditionally
>   (b) CLKREQ# driven by the EP for ASPM L0s, L1
>   (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> 
>   The HW+driver can tell the difference between downstream devices that
>   need (a) and (b), but does not know when to configure (c).  All devices
>   should work fine when the driver chooses (a) or (b), but (c) may be
>   desired to realize the extra power savings that L1SS offers.  So we
>   introduce the boolean "brcm,enable-l1ss" property to inform the driver
>   that (c) is desired.  Setting this property only makes sense when the
>   downstream device is L1SS-capable and the OS is configured to activate
>   this mode (e.g. policy==powersupersave).
> 
>   This property is already present in the Raspian version of Linux, but the
>   upstream driver implementation that follows adds more details and
>   discerns between (a) and (b).
> 
> Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 7e15aae7d69e..8b61c2179608 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -64,6 +64,15 @@ properties:
>  
>    aspm-no-l0s: true
>  
> +  brcm,enable-l1ss:
> +    description: Indicates that PCIe L1SS power savings
> +      are desired, the downstream device is L1SS-capable, and the
> +      OS has been configured to enable this mode.  For boards
> +      using a mini-card connector, this mode may not meet the
> +      TCRLon maximum time of 400ns, as specified in 3.2.5.2.2
> +      of the PCI Express Mini CEM 2.0 specification.

As Lorenzo said, this property doesn't belong in DT. DT is supposed to specify
the hardware capability and not system/OS behavior. If this flag specifies
whether the PCIe controller supports L1SS or not, then it is fine but apparantly
this specifies that all downstream devices are L1SS capable which you cannot
guarantee unless you poke into their LNKCAP during runtime.

You should handle this in the driver itself.

- Mani

> +    type: boolean
> +
>    brcm,scb-sizes:
>      description: u64 giving the 64bit PCIe memory
>        viewport size of a memory controller.  There may be up to
> -- 
> 2.17.1
> 

-- 
மணிவண்ணன் சதாசிவம்