[PATCH 2/2] ata: pata_ep93xx: use soc_device_match for UDMA modes

[Nikita Shubin via B4 Relay]

From: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>

Replace ep93xx_chip_revision() with soc_device_match(), so
ep93xx_chip_revision() can be safetly dropped from exported functions.

Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
---
 drivers/ata/pata_ep93xx.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 4ce0f37c7a89..3f91b6cff353 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -40,6 +40,7 @@
 #include <linux/ata.h>
 #include <linux/libata.h>
 #include <linux/platform_device.h>
+#include <linux/sys_soc.h>
 #include <linux/delay.h>
 #include <linux/dmaengine.h>
 #include <linux/ktime.h>
@@ -910,6 +911,12 @@ static struct ata_port_operations ep93xx_pata_port_ops = {
 	.port_start		= ep93xx_pata_port_start,
 };
 
+static const struct soc_device_attribute ep93xx_soc_table[] = {
+	{ .revision = "E1", .data = (void *)ATA_UDMA3 },
+	{ .revision = "E2", .data = (void *)ATA_UDMA4 },
+	{ /* sentinel */ }
+};
+
 static int ep93xx_pata_probe(struct platform_device *pdev)
 {
 	struct ep93xx_pata_data *drv_data;
@@ -976,12 +983,11 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
 	 * so this driver supports only UDMA modes.
 	 */
 	if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) {
-		int chip_rev = ep93xx_chip_revision();
+		const struct soc_device_attribute *match;
 
-		if (chip_rev == EP93XX_CHIP_REV_E1)
-			ap->udma_mask = ATA_UDMA3;
-		else if (chip_rev == EP93XX_CHIP_REV_E2)
-			ap->udma_mask = ATA_UDMA4;
+		match = soc_device_match(ep93xx_soc_table);
+		if (match)
+			ap->udma_mask = (unsigned int) match->data;
 		else
 			ap->udma_mask = ATA_UDMA2;
 	}

-- 
2.39.2