[PATCH v2 3/3] iio: pressure: bmp280: Add support for BMP390

[Angel Iglesias]

Adds BMP390 device id to the supported ids on bmp380 sensor family

Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 4a544a20d6cb..d679a5644d16 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -13,6 +13,7 @@
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf
  *
  * Notice:
@@ -1226,7 +1227,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
 
 static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
 static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
-static const uint8_t bmp380_chip_ids[] = { BMP380_CHIP_ID };
+static const uint8_t bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID };
 
 const struct bmp280_chip_info bmp380_chip_info = {
 	.id_reg = BMP380_REG_ID,
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index c2acc9315223..d536e123ef14 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -292,6 +292,7 @@
 #define BMP580_CHIP_ID_ALT		0x51
 #define BMP180_CHIP_ID			0x55
 #define BMP280_CHIP_ID			0x58
+#define BMP390_CHIP_ID			0x60
 #define BME280_CHIP_ID			0x60
 #define BMP280_SOFT_RESET_VAL		0xB6
 
-- 
2.42.0