[PATCH v5 0/4] Add initial support for SM7125 and Xiaomi SM7125 platform

[David Wronek]

This series introduces support for the Qualcomm SM7125 SoC and the
Xiaomi SM7125 platform.

Signed-off-by: David Wronek <davidwronek@xxxxxxxxx>
---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/20230704163848.169853-2-davidwronek@xxxxxxxxx/

Changes in v3:
- Disable pm6150 rtc by default
- Fix wrong pm8150l PMIC in joyeuse dts
- Link to v2: https://lore.kernel.org/all/20230706124339.134272-1-davidwronek@xxxxxxxxx/

Changes in v4:
- Fix key-vol-down node name
- Link to v3: https://lore.kernel.org/all/20230715091932.161507-1-davidwronek@xxxxxxxxx/

Changes in v5:
- Rename common dtsi to sm7125-xiaomi-common
- Link to v4: https://lore.kernel.org/all/20230723190725.1619193-1-davidwronek@xxxxxxxxx/

---
David Wronek (4):
  dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
  arm64: dts: qcom: pm6150: Add resin and rtc nodes
  arm64: dts: qcom: Add SM7125 device tree
  arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-common.dtsi   | 423 ++++++++++++++++++
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 arch/arm64/boot/dts/qcom/sm7125.dtsi          |  16 +
 6 files changed, 479 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi

-- 
2.42.0