[PATCH v1 2/3] spidev: Switch to use spi_get_csgpiod()

[Andy Shevchenko]

spidev_ioctl() checks if there is an SPI chip select is driven by GPIO.
Instead of current code, we can call spi_get_csgpiod().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/spi/spidev.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index dc516f0ca71f..e324b42c658c 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -393,8 +393,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	case SPI_IOC_RD_MODE32:
 		tmp = spi->mode;
 
-		if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
-		    ctlr->cs_gpiods[spi_get_chipselect(spi, 0)])
+		if (ctlr->use_gpio_descriptors && spi_get_csgpiod(spi, 0))
 			tmp &= ~SPI_CS_HIGH;
 
 		if (cmd == SPI_IOC_RD_MODE)
@@ -430,8 +429,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 				break;
 			}
 
-			if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
-			    ctlr->cs_gpiods[spi_get_chipselect(spi, 0)])
+			if (ctlr->use_gpio_descriptors && spi_get_csgpiod(spi, 0))
 				tmp |= SPI_CS_HIGH;
 
 			tmp |= spi->mode & ~SPI_MODE_MASK;
-- 
2.40.0.1.gaa8946217a0b