Re: [PATCH v2] usb: typec: qcom: check regulator enable status before disabling it

[hui liu]

On 8/25/2023 6:11 PM, Bryan O'Donoghue wrote:
> On 25/08/2023 11:03, hui liu wrote:
> > Hi Heikki,
> >
> > I will let Bryan to comment, I am using the driver to support the 
> > pdphy in SMB2352 and there is no external regulator required, so I am 
> > just using a dummy regulator device and I saw this unbalanced 
> > regulator disabling warnings, so my intention for this change is just 
> > fixing the warning message. However, I am fine with whatever 
> > suggestion you have, since the logic is straightforward, and I can 
> > make the changes once you have the agreement.
> >
> > Thanks,
> > Hui
>
> Err well on real hardware with a real regulator I don't see this error.
Just a doublt, if real regulator has no this error, who enabled it 
before it was reseted?
> I'd say we should try the second proposed changed in pdphy_start 
> pdphy_stop since it looks neater.
I updated the code refer to the proposal, and it worked well,but I just 
thought it makes code a little redundant. Why don't we only keep one 
pdphy_enable/pdphy_disable or pdphy_start/pdphy_stop?
> If it works then fine, else lets stick to your original fix.
>
> ---
> bod