Re: [PATCH v2 06/18] perf s390 s390_cpumcfdg_dump: Don't scan all PMUs

From: Arnaldo Carvalho de Melo
Date: Mon Aug 28 2023 - 13:45:58 EST

Next message: Serge Semin: "Re: [PATCH net-next v2 3/3] net: stmmac: add glue layer for T-HEAD TH1520 SoC"
Previous message: Waiman Long: "Re: [PATCH 3/3] mm: memcg: use non-unified stats flushing for userspace reads"
In reply to: Ian Rogers: "Re: [PATCH v2 06/18] perf s390 s390_cpumcfdg_dump: Don't scan all PMUs"
Next in thread: Arnaldo Carvalho de Melo: "Re: [PATCH v2 06/18] perf s390 s390_cpumcfdg_dump: Don't scan all PMUs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Em Fri, Aug 25, 2023 at 03:56:54PM -0700, Ian Rogers escreveu:
> On Fri, Aug 25, 2023 at 1:56 PM Arnaldo Carvalho de Melo
> <acme@xxxxxxxxxx> wrote:
> >
> > Em Fri, Aug 25, 2023 at 04:39:22PM +0200, Thomas Richter escreveu:
> > > On 8/25/23 15:14, Ian Rogers wrote:
> > > > On Fri, Aug 25, 2023 at 1:20 AM Thomas Richter <tmricht@xxxxxxxxxxxxx> wrote:
> >
> > > >> On 8/24/23 15:59, Arnaldo Carvalho de Melo wrote:
> > > >>> Em Wed, Aug 23, 2023 at 09:13:18PM -0700, Ian Rogers escreveu:
> > > >>>> Rather than scanning all PMUs for a counter name, scan the PMU
> > > >>>> associated with the evsel of the sample. This is done to remove a
> > > >>>> dependence on pmu-events.h.
> >
> > > >>> I'm applying this one, and CCing the S/390 developers so that they can
> > > >>> try this and maybe provide an Acked-by/Tested-by,
> >
> > > >> I have downloaded this patch set of 18 patches (using b4), but they do not
> > > >> apply on my git tree.
> >
> > > >> Which git branch do I have to use to test this. Thanks a lot.
> >
> > > > the changes are in the perf-tools-next tree:
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/
> >
> > > Unfurtunately this patch set fails again on s390.
> > > Here is the test output from the current 6.5.0rc7 kernel:
> > >
> > > # ./perf test 6 10 'perf all metricgroups test' 'perf all metrics test'
> > > 6: Parse event definition strings :
> > > 6.1: Test event parsing : Ok
> > > 6.2: Parsing of all PMU events from sysfs : Ok
> > > 6.3: Parsing of given PMU events from sysfs : Ok
> > > 6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
> > > 6.5: Parsing of aliased events : Ok
> > > 6.6: Parsing of terms (event modifiers) : Ok
> > > 10: PMU events :
> > > 10.1: PMU event table sanity : Ok
> > > 10.2: PMU event map aliases : Ok
> > > 10.3: Parsing of PMU event table metrics : Ok
> > > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > > 10.5: Parsing of metric thresholds with fake PMUs : Ok
> > > 95: perf all metricgroups test : Ok
> > > 96: perf all metrics test : Ok
> > > #
> > >
> > > This looks good.
> >
> > Reproduced:
> >
> > # grep -E vendor_id\|^processor -m2 /proc/cpuinfo
> > vendor_id : IBM/S390
> > processor 0: version = 00, identification = 1A33E8, machine = 2964
> > #
> > # perf test 6 10 'perf all metricgroups test' 'perf all metrics test'
> > 6: Parse event definition strings :
> > 6.1: Test event parsing : Ok
> > 6.2: Parsing of all PMU events from sysfs : Ok
> > 6.3: Parsing of given PMU events from sysfs : Ok
> > 6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
> > 6.5: Parsing of aliased events : Ok
> > 6.6: Parsing of terms (event modifiers) : Ok
> > 10: PMU events :
> > 10.1: PMU event table sanity : Ok
> > 10.2: PMU event map aliases : Ok
> > 10.3: Parsing of PMU event table metrics : Ok
> > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > 10.5: Parsing of metric thresholds with fake PMUs : Ok
> > 95: perf all metricgroups test : Ok
> > 96: perf all metrics test : Ok
> > # perf -v
> > perf version 6.5.rc7.g6f0edbb833ec
> > #
> >
> > > However when I use the check-out from perf-tools-next, I get this output:
> > > # ./perf test 6 10 'perf all metricgroups test' 'perf all metrics test'
> > > 6: Parse event definition strings :
> > > 6.1: Test event parsing : Ok
> > > 6.2: Parsing of all PMU events from sysfs : FAILED!
> > > 6.3: Parsing of given PMU events from sysfs : Ok
> > > 6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
> > > 6.5: Parsing of aliased events : FAILED!
> > > 6.6: Parsing of terms (event modifiers) : Ok
> > > 10: PMU events :
> > > 10.1: PMU event table sanity : Ok
> > > 10.2: PMU event map aliases : FAILED!
> > > 10.3: Parsing of PMU event table metrics : Ok
> > > 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
> > > 10.5: Parsing of metric thresholds with fake PMUs : Ok
> > > 93: perf all metricgroups test : FAILED!
> > > 94: perf all metrics test : FAILED!
> > > #
> > >
> > > So some tests are failing again.
> > >
> > > I am out for the next two weeks, Sumanth Korikkar (on to list) might be able to help.
> > > Thanks a lot.
> >
> > [root@kernelqe3 linux]# git checkout perf-tools-next
> > git Switched to branch 'perf-tools-next'
> > Your branch is up to date with 'perf-tools-next/perf-tools-next'.
> > [root@kernelqe3 linux]# git log --oneline -5
> > eeb6b12992c4 (HEAD -> perf-tools-next, perf-tools-next/perf-tools-next) perf jevents: Don't append Unit to desc
> > f208b2c6f984 (perf-tools-next/tmp.perf-tools-next) perf scripts python gecko: Launch the profiler UI on the default browser with the appropriate URL
> > 43803cb16f99 perf scripts python: Add support for input args in gecko script
> > f85d120c46e7 perf jevents: Sort strings in the big C string to reduce faults
> > 8d4b6d37ea78 perf pmu: Lazily load sysfs aliases
> > [root@kernelqe3 linux]# make BUILD_BPF_SKEL=1 -C tools/perf O=/tmp/build/perf install-bin
> >
> > [root@kernelqe3 linux]# perf -v
> > perf version 6.5.rc5.geeb6b12992c4
> > [root@kernelqe3 linux]# git log --oneline -1
> > eeb6b12992c4 (HEAD -> perf-tools-next, perf-tools-next/perf-tools-next) perf jevents: Don't append Unit to desc
> > [root@kernelqe3 linux]# perf test 6 10 'perf all metricgroups test' 'perf all metrics test'
> > 6: Parse event definition strings :
> > 6.1: Test event parsing : Ok
> > 6.2: Parsing of all PMU events from sysfs : FAILED!
> > 6.3: Parsing of given PMU events from sysfs : Ok
> > 6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
> > 6.5: Parsing of aliased events : FAILED!
> > 6.6: Parsing of terms (event modifiers) : Ok
> > 10: PMU events :
> > 10.1: PMU event table sanity : Ok
> > 10.2: PMU event map aliases : FAILED!
> > 10.3: Parsing of PMU event table metrics : Ok
> > 10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
> > 10.5: Parsing of metric thresholds with fake PMUs : Ok
> > 93: perf all metricgroups test : FAILED!
> > 94: perf all metrics test : FAILED!
> > [root@kernelqe3 linux]#
> >
> > Bisecting the first problem:
> >
> > 10.2: PMU event map aliases : FAILED!
> >
> > make: Leaving directory '/root/git/linux/tools/perf'
> > 6: Parse event definition strings :
> > 6.1: Test event parsing : Ok
> > 6.2: Parsing of all PMU events from sysfs : Ok
> > 6.3: Parsing of given PMU events from sysfs : Ok
> > 6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
> > 6.5: Parsing of aliased events : Ok
> > 6.6: Parsing of terms (event modifiers) : Ok
> > 10: PMU events :
> > 10.1: PMU event table sanity : Ok
> > 10.2: PMU event map aliases : FAILED!
> > 10.3: Parsing of PMU event table metrics : Ok
> > 10.4: Parsing of PMU event table metrics with fake PMUs : Ok
> > 10.5: Parsing of metric thresholds with fake PMUs : Ok
> > 93: perf all metricgroups test : Ok
> > 94: perf all metrics test : Ok
> > [root@kernelqe3 linux]# git bisect bad
> > 2e255b4f9f41f137d9e3dc4fae3603a9c2c3dd28 is the first bad commit
> > commit 2e255b4f9f41f137d9e3dc4fae3603a9c2c3dd28
> > Author: Ian Rogers <irogers@xxxxxxxxxx>
> > Date: Wed Aug 23 21:13:16 2023 -0700
> >
> > perf jevents: Group events by PMU
> >
> > Prior to this change a cpuid would map to a list of events where the PMU
> > would be encoded alongside the event information. This change breaks
> > apart each group of events so that there is a group per PMU. A new table
> > is added with the PMU's name and the list of events, the original table
> > now holding an array of these per PMU tables.
> >
> > These changes are to make it easier to get per PMU information about
> > events, rather than the current approach of scanning all events. The
> > perf binary size with BPF skeletons on x86 is reduced by about 1%. The
> > unidentified PMU is now always expanded to "cpu".
> >
> > Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
> > Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> > Cc: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
> > Cc: Gaosheng Cui <cuigaosheng1@xxxxxxxxxx>
> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > Cc: James Clark <james.clark@xxxxxxx>
> > Cc: Jing Zhang <renyu.zj@xxxxxxxxxxxxxxxxx>
> > Cc: Jiri Olsa <jolsa@xxxxxxxxxx>
> > Cc: John Garry <john.g.garry@xxxxxxxxxx>
> > Cc: Kajol Jain <kjain@xxxxxxxxxxxxx>
> > Cc: Kan Liang <kan.liang@xxxxxxxxxxxxxxx>
> > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > Cc: Namhyung Kim <namhyung@xxxxxxxxxx>
> > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > Cc: Ravi Bangoria <ravi.bangoria@xxxxxxx>
> > Cc: Rob Herring <robh@xxxxxxxxxx>
> > Link: https://lore.kernel.org/r/20230824041330.266337-5-irogers@xxxxxxxxxx
> > Signed-off-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
> >
> > tools/perf/pmu-events/jevents.py | 181 +++++++++++++++++++++++++++++----------
> > tools/perf/tests/pmu-events.c | 30 ++++---
> > 2 files changed, 154 insertions(+), 57 deletions(-)
> > [root@kernelqe3 linux]#
> >
>
> This change defaulted events without a specified PMU to being for the
> PMU 'cpu', so that events in pmu-events.c were associated with a PMU
> and we could find per-PMU information easily. The test events have no
> PMU and so this has broken s390 where the the PMU should be "cpum_cf".
> It has probably also broken x86 hybrid and arm where their default PMU
> isn't cpu. I'll work on a fix, but the problem will be limited to the
> test.

So, with your "default_core" branche we go to:

[root@kernelqe3 linux]# perf test 10
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
10.5: Parsing of metric thresholds with fake PMUs : Ok
[root@kernelqe3 linux]# perf --version
perf version 6.5.rc5.g3d63ae82aa12
[root@kernelqe3 linux]#

The other tests:

[root@kernelqe3 linux]# perf --version
perf version 6.5.rc5.g3d63ae82aa12
[root@kernelqe3 linux]# perf test 6 10 'perf all metricgroups test' 'perf all metrics test'
6: Parse event definition strings :
6.1: Test event parsing : Ok
6.2: Parsing of all PMU events from sysfs : FAILED!
6.3: Parsing of given PMU events from sysfs : Ok
6.4: Parsing of aliased events from sysfs : Skip (no aliases in sysfs)
6.5: Parsing of aliased events : FAILED!
6.6: Parsing of terms (event modifiers) : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : FAILED!
10.5: Parsing of metric thresholds with fake PMUs : Ok
93: perf all metricgroups test : FAILED!
94: perf all metrics test : FAILED!
[root@kernelqe3 linux]#

Trying to bisect it now.

- Arnaldo

Next message: Serge Semin: "Re: [PATCH net-next v2 3/3] net: stmmac: add glue layer for T-HEAD TH1520 SoC"
Previous message: Waiman Long: "Re: [PATCH 3/3] mm: memcg: use non-unified stats flushing for userspace reads"
In reply to: Ian Rogers: "Re: [PATCH v2 06/18] perf s390 s390_cpumcfdg_dump: Don't scan all PMUs"
Next in thread: Arnaldo Carvalho de Melo: "Re: [PATCH v2 06/18] perf s390 s390_cpumcfdg_dump: Don't scan all PMUs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]