[PATCH 1/7] dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible

[Sricharan Ramabadhran]

IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt.

Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
 .../bindings/thermal/qcom-tsens.yaml          | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 27e9e16e6455..2309bb6dce1b 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -42,6 +42,7 @@ properties:
               - qcom,msm8956-tsens
               - qcom,msm8976-tsens
               - qcom,qcs404-tsens
+              - qcom,ipq5018-tsens
           - const: qcom,tsens-v1
 
       - description: v2 of TSENS
@@ -409,4 +410,22 @@ examples:
            #qcom,sensors = <16>;
            #thermal-sensor-cells = <1>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 5 (for any IPQ5018 based SoC-s):
+    tsens5: thermal-sensor@4a9000 {
+           compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+           reg = <0x4a9000 0x1000>, /* TM */
+                 <0x4a8000 0x1000>; /* SORT */
+
+           nvmem-cells = <&tsens_calib>;
+           nvmem-cell-names = "calib";
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "uplow";
+
+           #qcom,sensors = <5>;
+           #thermal-sensor-cells = <1>;
+    };
 ...
-- 
2.34.1