[PATCH v2 3/3] perf vendor events intel: Fix spelling mistakes

From: Ian Rogers
Date: Mon Aug 28 2023 - 20:19:09 EST

Update perf json files with spelling fixes by Colin Ian King
<colin.i.king@xxxxxxxxx> contributed in:
https://github.com/intel/perfmon/pull/96
Fix various spelling mistakes and typos as found using codespell #96

This is added on top of the spelling mistakes and release number
updates in:
https://github.com/intel/perfmon/pull/98
EMR, SPR, CLX, SKX, BDX, HSX, BDW-DE, WSM-EP*, NHM-*, JKT, IVT : Release event
updates

Some additional spelling fixes reported by Edward Baker
<edward.baker@xxxxxxxxx> are added on top of this.

Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
---
.../arch/x86/alderlake/adl-metrics.json | 6 ++---
.../arch/x86/alderlake/pipeline.json | 2 +-
.../arch/x86/alderlaken/adln-metrics.json | 6 ++---
.../pmu-events/arch/x86/bonnell/frontend.json | 2 +-
.../x86/broadwellde/uncore-interconnect.json | 18 +++++++--------
.../x86/broadwellx/uncore-interconnect.json | 18 +++++++--------
.../pmu-events/arch/x86/haswell/memory.json | 2 +-
.../pmu-events/arch/x86/haswellx/memory.json | 2 +-
.../x86/haswellx/uncore-interconnect.json | 18 +++++++--------
.../pmu-events/arch/x86/ivybridge/cache.json | 8 +++----
.../arch/x86/ivybridge/frontend.json | 18 +++++++--------
.../pmu-events/arch/x86/ivytown/cache.json | 4 ++--
.../arch/x86/ivytown/uncore-interconnect.json | 20 ++++++++---------
.../x86/jaketown/uncore-interconnect.json | 18 +++++++--------
tools/perf/pmu-events/arch/x86/mapfile.csv | 22 +++++++++----------
.../pmu-events/arch/x86/nehalemep/cache.json | 2 +-
.../arch/x86/nehalemep/floating-point.json | 2 +-
.../pmu-events/arch/x86/nehalemex/cache.json | 2 +-
.../arch/x86/nehalemex/floating-point.json | 2 +-
.../x86/westmereep-dp/floating-point.json | 2 +-
.../arch/x86/westmereep-sp/cache.json | 2 +-
.../x86/westmereep-sp/floating-point.json | 2 +-
.../pmu-events/arch/x86/westmereex/cache.json | 2 +-
.../arch/x86/westmereex/floating-point.json | 2 +-
24 files changed, 91 insertions(+), 91 deletions(-)

diff --git a/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
index c6780d5c456b..8b6bed3bc766 100644
--- a/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/alderlake/adl-metrics.json
@@ -395,13 +395,13 @@
"Unit": "cpu_atom"
},
{
- "BriefDescription": "Instructions per Branch (lower number means higher occurance rate)",
+ "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
"MetricName": "tma_info_inst_mix_ipbranch",
"Unit": "cpu_atom"
},
{
- "BriefDescription": "Instruction per (near) call (lower number means higher occurance rate)",
+ "BriefDescription": "Instruction per (near) call (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.CALL",
"MetricName": "tma_info_inst_mix_ipcall",
"Unit": "cpu_atom"
@@ -726,7 +726,7 @@
"Unit": "cpu_atom"
},
{
- "BriefDescription": "Counts the numer of issue slots that result in retirement slots.",
+ "BriefDescription": "Counts the number of issue slots that result in retirement slots.",
"DefaultMetricgroupName": "TopdownL1",
"MetricExpr": "TOPDOWN_RETIRING.ALL / tma_info_core_slots",
"MetricGroup": "Default;TopdownL1;tma_L1_group",
diff --git a/tools/perf/pmu-events/arch/x86/alderlake/pipeline.json b/tools/perf/pmu-events/arch/x86/alderlake/pipeline.json
index cb5b8611064b..a92013cdf136 100644
--- a/tools/perf/pmu-events/arch/x86/alderlake/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/alderlake/pipeline.json
@@ -1145,7 +1145,7 @@
"BriefDescription": "TMA slots wasted due to incorrect speculation by branch mispredictions",
"EventCode": "0xa4",
"EventName": "TOPDOWN.BR_MISPREDICT_SLOTS",
- "PublicDescription": "Number of TMA slots that were wasted due to incorrect speculation by (any type of) branch mispredictions. This event estimates number of specualtive operations that were issued but not retired as well as the out-of-order engine recovery past a branch misprediction.",
+ "PublicDescription": "Number of TMA slots that were wasted due to incorrect speculation by (any type of) branch mispredictions. This event estimates number of speculative operations that were issued but not retired as well as the out-of-order engine recovery past a branch misprediction.",
"SampleAfterValue": "10000003",
"UMask": "0x8",
"Unit": "cpu_core"
diff --git a/tools/perf/pmu-events/arch/x86/alderlaken/adln-metrics.json b/tools/perf/pmu-events/arch/x86/alderlaken/adln-metrics.json
index 06e67e34e1bf..c150c14ac6ed 100644
--- a/tools/perf/pmu-events/arch/x86/alderlaken/adln-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/alderlaken/adln-metrics.json
@@ -328,12 +328,12 @@
"MetricName": "tma_info_inst_mix_idiv_uop_ratio"
},
{
- "BriefDescription": "Instructions per Branch (lower number means higher occurance rate)",
+ "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
"MetricName": "tma_info_inst_mix_ipbranch"
},
{
- "BriefDescription": "Instruction per (near) call (lower number means higher occurance rate)",
+ "BriefDescription": "Instruction per (near) call (lower number means higher occurrence rate)",
"MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.CALL",
"MetricName": "tma_info_inst_mix_ipcall"
},
@@ -616,7 +616,7 @@
"ScaleUnit": "100%"
},
{
- "BriefDescription": "Counts the numer of issue slots that result in retirement slots.",
+ "BriefDescription": "Counts the number of issue slots that result in retirement slots.",
"DefaultMetricgroupName": "TopdownL1",
"MetricExpr": "TOPDOWN_RETIRING.ALL / tma_info_core_slots",
"MetricGroup": "Default;TopdownL1;tma_L1_group",
diff --git a/tools/perf/pmu-events/arch/x86/bonnell/frontend.json b/tools/perf/pmu-events/arch/x86/bonnell/frontend.json
index 8d2f4edfb597..42284c02c11d 100644
--- a/tools/perf/pmu-events/arch/x86/bonnell/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/bonnell/frontend.json
@@ -63,7 +63,7 @@
"UMask": "0x2"
},
{
- "BriefDescription": "Non-CISC nacro instructions decoded",
+ "BriefDescription": "Non-CISC macro instructions decoded",
"EventCode": "0xAA",
"EventName": "MACRO_INSTS.NON_CISC_DECODED",
"SampleAfterValue": "2000000",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
index 8a327e0f1441..910395977a6e 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-interconnect.json
@@ -253,7 +253,7 @@
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -261,7 +261,7 @@
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -269,7 +269,7 @@
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -277,7 +277,7 @@
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -285,7 +285,7 @@
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -293,7 +293,7 @@
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -301,7 +301,7 @@
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -309,7 +309,7 @@
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -317,7 +317,7 @@
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
index e61a23f68899..b9fb216bee16 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellx/uncore-interconnect.json
@@ -271,7 +271,7 @@
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -279,7 +279,7 @@
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -287,7 +287,7 @@
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -295,7 +295,7 @@
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -303,7 +303,7 @@
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -311,7 +311,7 @@
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -319,7 +319,7 @@
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -327,7 +327,7 @@
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -335,7 +335,7 @@
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/haswell/memory.json b/tools/perf/pmu-events/arch/x86/haswell/memory.json
index 2fc25e22a42a..df44c28efeeb 100644
--- a/tools/perf/pmu-events/arch/x86/haswell/memory.json
+++ b/tools/perf/pmu-events/arch/x86/haswell/memory.json
@@ -62,7 +62,7 @@
"BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
"EventCode": "0xC3",
"EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
- "PublicDescription": "This event counts the number of memory ordering machine clears detected. Memory ordering machine clears can result from memory address aliasing or snoops from another hardware thread or core to data inflight in the pipeline. Machine clears can have a significant performance impact if they are happening frequently.",
+ "PublicDescription": "This event counts the number of memory ordering machine clears detected. Memory ordering machine clears can result from memory address aliasing or snoops from another hardware thread or core to data in-flight in the pipeline. Machine clears can have a significant performance impact if they are happening frequently.",
"SampleAfterValue": "100003",
"UMask": "0x2"
},
diff --git a/tools/perf/pmu-events/arch/x86/haswellx/memory.json b/tools/perf/pmu-events/arch/x86/haswellx/memory.json
index 2d212cf59e92..d66e465ce41a 100644
--- a/tools/perf/pmu-events/arch/x86/haswellx/memory.json
+++ b/tools/perf/pmu-events/arch/x86/haswellx/memory.json
@@ -62,7 +62,7 @@
"BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
"EventCode": "0xC3",
"EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
- "PublicDescription": "This event counts the number of memory ordering machine clears detected. Memory ordering machine clears can result from memory address aliasing or snoops from another hardware thread or core to data inflight in the pipeline. Machine clears can have a significant performance impact if they are happening frequently.",
+ "PublicDescription": "This event counts the number of memory ordering machine clears detected. Memory ordering machine clears can result from memory address aliasing or snoops from another hardware thread or core to data in-flight in the pipeline. Machine clears can have a significant performance impact if they are happening frequently.",
"SampleAfterValue": "100003",
"UMask": "0x2"
},
diff --git a/tools/perf/pmu-events/arch/x86/haswellx/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/haswellx/uncore-interconnect.json
index 954e8198c7a5..bef1f5ef6f31 100644
--- a/tools/perf/pmu-events/arch/x86/haswellx/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/haswellx/uncore-interconnect.json
@@ -271,7 +271,7 @@
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -279,7 +279,7 @@
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -287,7 +287,7 @@
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -295,7 +295,7 @@
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -303,7 +303,7 @@
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -311,7 +311,7 @@
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -319,7 +319,7 @@
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -327,7 +327,7 @@
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -335,7 +335,7 @@
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/cache.json b/tools/perf/pmu-events/arch/x86/ivybridge/cache.json
index 6ddc7d1c61d5..46570b522095 100644
--- a/tools/perf/pmu-events/arch/x86/ivybridge/cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivybridge/cache.json
@@ -8,16 +8,16 @@
"UMask": "0x1"
},
{
- "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability",
+ "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers unavailability",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.FB_FULL",
- "PublicDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.",
+ "PublicDescription": "Cycles a demand request was blocked due to Fill Buffers unavailability.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
{
- "BriefDescription": "L1D miss oustandings duration in cycles",
+ "BriefDescription": "L1D miss outstanding duration in cycles",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.PENDING",
"PublicDescription": "Increments the number of outstanding L1D misses every cycle. Set Cmask = 1 and Edge =1 to count occurrences.",
@@ -506,7 +506,7 @@
"UMask": "0x8"
},
{
- "BriefDescription": "Cacheable and noncachaeble code read requests",
+ "BriefDescription": "Cacheable and noncacheable code read requests",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
"PublicDescription": "Demand code read requests sent to uncore.",
diff --git a/tools/perf/pmu-events/arch/x86/ivybridge/frontend.json b/tools/perf/pmu-events/arch/x86/ivybridge/frontend.json
index 89004a6c9ed1..4ee100024ca9 100644
--- a/tools/perf/pmu-events/arch/x86/ivybridge/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/ivybridge/frontend.json
@@ -142,35 +142,35 @@
"UMask": "0x4"
},
{
- "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_CYCLES",
- "PublicDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.",
+ "PublicDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.",
"SampleAfterValue": "2000003",
"UMask": "0x30"
},
{
- "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_CYCLES",
- "PublicDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy.",
+ "PublicDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.",
"SampleAfterValue": "2000003",
"UMask": "0x10"
},
{
- "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_OCCUR",
- "PublicDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy.",
+ "PublicDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy.",
"SampleAfterValue": "2000003",
"UMask": "0x10"
},
{
- "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by DSB. Set Cmask = 1 to count cycles. Add Edge=1 to count # of delivery.",
@@ -178,7 +178,7 @@
"UMask": "0x10"
},
{
- "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_MITE_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by MITE. Set Cmask = 1 to count cycles.",
@@ -196,7 +196,7 @@
"UMask": "0x30"
},
{
- "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ from MS by either DSB or MITE. Set Cmask = 1 to count cycles.",
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/cache.json b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
index c8f7d5e66504..0e8e77253978 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/cache.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/cache.json
@@ -8,11 +8,11 @@
"UMask": "0x1"
},
{
- "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability",
+ "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers unavailability",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.FB_FULL",
- "PublicDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.",
+ "PublicDescription": "Cycles a demand request was blocked due to Fill Buffers unavailability.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
diff --git a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
index ccf451534d16..914d2cfb3d3d 100644
--- a/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/ivytown/uncore-interconnect.json
@@ -140,7 +140,7 @@
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -148,21 +148,21 @@
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -170,21 +170,21 @@
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -192,14 +192,14 @@
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -293,7 +293,7 @@
"EventCode": "0xd",
"EventName": "UNC_I_TxR_REQUEST_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumultes the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjuection with the allocations event in order to calculate average latency of outbound requests.",
+ "PublicDescription": "Accumulates the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjunction with the allocations event in order to calculate average latency of outbound requests.",
"Unit": "IRP"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
index 874f15ea8228..0fc907e5cf3c 100644
--- a/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
+++ b/tools/perf/pmu-events/arch/x86/jaketown/uncore-interconnect.json
@@ -140,7 +140,7 @@
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -148,21 +148,21 @@
"EventCode": "0x1",
"EventName": "UNC_I_RxR_BL_DRS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -170,21 +170,21 @@
"EventCode": "0x2",
"EventName": "UNC_I_RxR_BL_NCB_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of cycles when the BL Ingress is full. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
@@ -192,14 +192,14 @@
"EventCode": "0x3",
"EventName": "UNC_I_RxR_BL_NCS_INSERTS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Counts the number of allocations into the BL Ingress. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requets as well as outbound MMIO writes.",
+ "PublicDescription": "Accumulates the occupancy of the BL Ingress in each cycles. This queue is where the IRP receives data from R2PCIe (the ring). It is used for data returns from read requests as well as outbound MMIO writes.",
"Unit": "IRP"
},
{
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index dca2133473e3..57ba7e814563 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -3,9 +3,9 @@ GenuineIntel-6-(97|9A|B7|BA|BF),v1.21,alderlake,core
GenuineIntel-6-BE,v1.21,alderlaken,core
GenuineIntel-6-(1C|26|27|35|36),v4,bonnell,core
GenuineIntel-6-(3D|47),v28,broadwell,core
-GenuineIntel-6-56,v10,broadwellde,core
-GenuineIntel-6-4F,v21,broadwellx,core
-GenuineIntel-6-55-[56789ABCDEF],v1.19,cascadelakex,core
+GenuineIntel-6-56,v11,broadwellde,core
+GenuineIntel-6-4F,v22,broadwellx,core
+GenuineIntel-6-55-[56789ABCDEF],v1.20,cascadelakex,core
GenuineIntel-6-9[6C],v1.04,elkhartlake,core
GenuineIntel-6-CF,v1.00,emeraldrapids,core
GenuineIntel-6-5[CF],v13,goldmont,core
@@ -13,28 +13,28 @@ GenuineIntel-6-7A,v1.01,goldmontplus,core
GenuineIntel-6-B6,v1.00,grandridge,core
GenuineIntel-6-A[DE],v1.01,graniterapids,core
GenuineIntel-6-(3C|45|46),v33,haswell,core
-GenuineIntel-6-3F,v27,haswellx,core
+GenuineIntel-6-3F,v28,haswellx,core
GenuineIntel-6-7[DE],v1.19,icelake,core
GenuineIntel-6-6[AC],v1.21,icelakex,core
GenuineIntel-6-3A,v24,ivybridge,core
-GenuineIntel-6-3E,v23,ivytown,core
-GenuineIntel-6-2D,v23,jaketown,core
+GenuineIntel-6-3E,v24,ivytown,core
+GenuineIntel-6-2D,v24,jaketown,core
GenuineIntel-6-(57|85),v10,knightslanding,core
GenuineIntel-6-BD,v1.00,lunarlake,core
GenuineIntel-6-A[AC],v1.04,meteorlake,core
-GenuineIntel-6-1[AEF],v3,nehalemep,core
-GenuineIntel-6-2E,v3,nehalemex,core
+GenuineIntel-6-1[AEF],v4,nehalemep,core
+GenuineIntel-6-2E,v4,nehalemex,core
GenuineIntel-6-A7,v1.01,rocketlake,core
GenuineIntel-6-2A,v19,sandybridge,core
GenuineIntel-6-8F,v1.16,sapphirerapids,core
GenuineIntel-6-AF,v1.00,sierraforest,core
GenuineIntel-6-(37|4A|4C|4D|5A),v15,silvermont,core
GenuineIntel-6-(4E|5E|8E|9E|A5|A6),v57,skylake,core
-GenuineIntel-6-55-[01234],v1.31,skylakex,core
+GenuineIntel-6-55-[01234],v1.32,skylakex,core
GenuineIntel-6-86,v1.21,snowridgex,core
GenuineIntel-6-8[CD],v1.13,tigerlake,core
-GenuineIntel-6-2C,v4,westmereep-dp,core
-GenuineIntel-6-25,v3,westmereep-sp,core
+GenuineIntel-6-2C,v5,westmereep-dp,core
+GenuineIntel-6-25,v4,westmereep-sp,core
GenuineIntel-6-2F,v3,westmereex,core
AuthenticAMD-23-([12][0-9A-F]|[0-9A-F]),v2,amdzen1,core
AuthenticAMD-23-[[:xdigit:]]+,v1,amdzen2,core
diff --git a/tools/perf/pmu-events/arch/x86/nehalemep/cache.json b/tools/perf/pmu-events/arch/x86/nehalemep/cache.json
index 1a132fcda964..5113a4e059e4 100644
--- a/tools/perf/pmu-events/arch/x86/nehalemep/cache.json
+++ b/tools/perf/pmu-events/arch/x86/nehalemep/cache.json
@@ -287,7 +287,7 @@
"UMask": "0x20"
},
{
- "BriefDescription": "L2 lines alloacated",
+ "BriefDescription": "L2 lines allocated",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.ANY",
"SampleAfterValue": "100000",
diff --git a/tools/perf/pmu-events/arch/x86/nehalemep/floating-point.json b/tools/perf/pmu-events/arch/x86/nehalemep/floating-point.json
index c03f8990fa82..196ae1d9b157 100644
--- a/tools/perf/pmu-events/arch/x86/nehalemep/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/nehalemep/floating-point.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)",
+ "BriefDescription": "X87 Floating point assists for invalid input value (Precise Event)",
"EventCode": "0xF7",
"EventName": "FP_ASSIST.INPUT",
"PEBS": "1",
diff --git a/tools/perf/pmu-events/arch/x86/nehalemex/cache.json b/tools/perf/pmu-events/arch/x86/nehalemex/cache.json
index a4142cd2ca86..0042e53fdc78 100644
--- a/tools/perf/pmu-events/arch/x86/nehalemex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/nehalemex/cache.json
@@ -287,7 +287,7 @@
"UMask": "0x20"
},
{
- "BriefDescription": "L2 lines alloacated",
+ "BriefDescription": "L2 lines allocated",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.ANY",
"SampleAfterValue": "100000",
diff --git a/tools/perf/pmu-events/arch/x86/nehalemex/floating-point.json b/tools/perf/pmu-events/arch/x86/nehalemex/floating-point.json
index c03f8990fa82..196ae1d9b157 100644
--- a/tools/perf/pmu-events/arch/x86/nehalemex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/nehalemex/floating-point.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)",
+ "BriefDescription": "X87 Floating point assists for invalid input value (Precise Event)",
"EventCode": "0xF7",
"EventName": "FP_ASSIST.INPUT",
"PEBS": "1",
diff --git a/tools/perf/pmu-events/arch/x86/westmereep-dp/floating-point.json b/tools/perf/pmu-events/arch/x86/westmereep-dp/floating-point.json
index c03f8990fa82..196ae1d9b157 100644
--- a/tools/perf/pmu-events/arch/x86/westmereep-dp/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/westmereep-dp/floating-point.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)",
+ "BriefDescription": "X87 Floating point assists for invalid input value (Precise Event)",
"EventCode": "0xF7",
"EventName": "FP_ASSIST.INPUT",
"PEBS": "1",
diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json
index e00c301640f3..d025e2c0cf1c 100644
--- a/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json
+++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/cache.json
@@ -182,7 +182,7 @@
"UMask": "0x20"
},
{
- "BriefDescription": "L2 lines alloacated",
+ "BriefDescription": "L2 lines allocated",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.ANY",
"SampleAfterValue": "100000",
diff --git a/tools/perf/pmu-events/arch/x86/westmereep-sp/floating-point.json b/tools/perf/pmu-events/arch/x86/westmereep-sp/floating-point.json
index c03f8990fa82..196ae1d9b157 100644
--- a/tools/perf/pmu-events/arch/x86/westmereep-sp/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/westmereep-sp/floating-point.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)",
+ "BriefDescription": "X87 Floating point assists for invalid input value (Precise Event)",
"EventCode": "0xF7",
"EventName": "FP_ASSIST.INPUT",
"PEBS": "1",
diff --git a/tools/perf/pmu-events/arch/x86/westmereex/cache.json b/tools/perf/pmu-events/arch/x86/westmereex/cache.json
index 6c7c52733dda..18d61d43e4c9 100644
--- a/tools/perf/pmu-events/arch/x86/westmereex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/westmereex/cache.json
@@ -182,7 +182,7 @@
"UMask": "0x20"
},
{
- "BriefDescription": "L2 lines alloacated",
+ "BriefDescription": "L2 lines allocated",
"EventCode": "0xF1",
"EventName": "L2_LINES_IN.ANY",
"SampleAfterValue": "100000",
diff --git a/tools/perf/pmu-events/arch/x86/westmereex/floating-point.json b/tools/perf/pmu-events/arch/x86/westmereex/floating-point.json
index c03f8990fa82..196ae1d9b157 100644
--- a/tools/perf/pmu-events/arch/x86/westmereex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/westmereex/floating-point.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "X87 Floating poiint assists for invalid input value (Precise Event)",
+ "BriefDescription": "X87 Floating point assists for invalid input value (Precise Event)",
"EventCode": "0xF7",
"EventName": "FP_ASSIST.INPUT",
"PEBS": "1",
--
2.42.0.rc2.253.gd59a3bf2b4-goog