[PATCH v2] RFC: iio: lsm6dsx: Support temperature channel on some devices
From: Linus Walleij
Date: Tue Aug 29 2023 - 03:45:48 EST
The ISM330 sensors (wai 0x6b) has a temperature channel that can
be read out. Modify the lsm6dsx core to accomodate temperature
readout on these sensors:
- Make headspace for three members in the channels and odr_table,
- Support offset
- Add code to avoid configuring the ODR of the temperature
sensor, it has no real ODR control register.
This is investigated because the hardware has important real-life
use cases using the Linux kernel.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
The ISM330DHCX is used in the SpaceX Starlink terminals which
are running a realtime patched close-to-mainline Linux kernel so
let's support temperature readout on it because why not.
SpaceX is using the temperature.
---
Changes in v2:
- Put to RFC because I can't test changes.
- Added some mail addresses to SpaceX to the header. Maybe you
guys can check if this works for you. Or forward to designated
open source ambassador or whatever can help. (Addresses found
in SpaceX code drop.)
- Drop the code with strings for ism330dhc as we concluded that
this is probably ism330dhcx which is already supported.
(Would be nice if SpaceX can confirm.)
- Don't write in nonsense register 0x0a for temperature sensor
- More elaborate code to just avoid writing ODR for the temperature
sensor and instead rely on gyro or accelerometer to drive
the odr
- Link to v1: https://lore.kernel.org/r/20230811-iio-spacex-lsm6ds0-v1-0-e953a440170d@xxxxxxxxxx
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 24 +++++++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 4 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 79 +++++++++++++++++++++++++-
3 files changed, 102 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c19237717e81..4d013889c287 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -118,6 +118,23 @@ enum st_lsm6dsx_hw_id {
.ext_info = st_lsm6dsx_ext_info, \
}
+#define ST_LSM6DSX_TEMP(chan_type, addr, scan_idx) \
+{ \
+ .type = chan_type, \
+ .address = addr, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = scan_idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
struct st_lsm6dsx_reg {
u8 addr;
u8 mask;
@@ -320,7 +337,7 @@ struct st_lsm6dsx_settings {
struct {
const struct iio_chan_spec *chan;
int len;
- } channels[2];
+ } channels[3];
struct {
struct st_lsm6dsx_reg irq1;
struct st_lsm6dsx_reg irq2;
@@ -332,7 +349,7 @@ struct st_lsm6dsx_settings {
struct st_lsm6dsx_reg od;
} irq_config;
struct st_lsm6dsx_reg drdy_mask;
- struct st_lsm6dsx_odr_table_entry odr_table[2];
+ struct st_lsm6dsx_odr_table_entry odr_table[3];
struct st_lsm6dsx_samples_to_discard samples_to_discard[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
@@ -346,6 +363,7 @@ struct st_lsm6dsx_settings {
enum st_lsm6dsx_sensor_id {
ST_LSM6DSX_ID_GYRO,
ST_LSM6DSX_ID_ACC,
+ ST_LSM6DSX_ID_TEMP,
ST_LSM6DSX_ID_EXT0,
ST_LSM6DSX_ID_EXT1,
ST_LSM6DSX_ID_EXT2,
@@ -364,6 +382,7 @@ enum st_lsm6dsx_fifo_mode {
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
+ * @offset: Constant offset of the sensor
* @samples_to_discard: Number of samples to discard for filters settling time.
* @watermark: Sensor watermark level.
* @decimator: Sensor decimation factor.
@@ -378,6 +397,7 @@ struct st_lsm6dsx_sensor {
u32 gain;
u32 odr;
+ u32 offset;
u16 samples_to_discard;
u16 watermark;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 066fe561c5e8..c588451e2ddf 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -61,6 +61,7 @@ struct st_lsm6dsx_decimator_entry {
enum st_lsm6dsx_fifo_tag {
ST_LSM6DSX_GYRO_TAG = 0x01,
ST_LSM6DSX_ACC_TAG = 0x02,
+ ST_LSM6DSX_TEMP_TAG = 0x03,
ST_LSM6DSX_TS_TAG = 0x04,
ST_LSM6DSX_EXT0_TAG = 0x0f,
ST_LSM6DSX_EXT1_TAG = 0x10,
@@ -532,6 +533,9 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
case ST_LSM6DSX_ACC_TAG:
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
break;
+ case ST_LSM6DSX_TEMP_TAG:
+ iio_dev = hw->iio_devs[ST_LSM6DSX_ID_TEMP];
+ break;
case ST_LSM6DSX_EXT0_TAG:
if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 6a18b363cf73..76847d95c1b6 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -100,6 +100,11 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_chan_spec st_lsm6dsx_temp_channels[] = {
+ ST_LSM6DSX_TEMP(IIO_TEMP, 0x20, 0),
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.reset = {
@@ -835,6 +840,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.chan = st_lsm6dsx_gyro_channels,
.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
},
+ [ST_LSM6DSX_ID_TEMP] = {
+ .chan = st_lsm6dsx_temp_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_temp_channels),
+ },
},
.drdy_mask = {
.addr = 0x13,
@@ -869,6 +878,17 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[6] = { 833000, 0x07 },
.odr_len = 7,
},
+ [ST_LSM6DSX_ID_TEMP] = {
+ /*
+ * NOTE: this ODR will be capped and controllerd by the
+ * gyro and accelerometer don't have any reg to configure
+ * this ODR.
+ */
+ .odr_avl[0] = { 12500, 0x01 },
+ .odr_avl[1] = { 26000, 0x02 },
+ .odr_avl[2] = { 52000, 0x03 },
+ .odr_len = 3,
+ },
},
.fs_table = {
[ST_LSM6DSX_ID_ACC] = {
@@ -937,6 +957,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.addr = 0x09,
.mask = GENMASK(7, 4),
},
+ [ST_LSM6DSX_ID_TEMP] = {
+ .addr = 0x0A,
+ .mask = GENMASK(5, 4),
+ },
},
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
@@ -1618,8 +1642,8 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u32 odr, u8 *val)
odr_table = &sensor->hw->settings->odr_table[sensor->id];
for (i = 0; i < odr_table->odr_len; i++) {
/*
- * ext devices can run at different odr respect to
- * accel sensor
+ * ext devices and temp sensor can run at different odr
+ * respect to accel sensor
*/
if (odr_table->odr_avl[i].milli_hz >= odr)
break;
@@ -1661,6 +1685,21 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
switch (sensor->id) {
case ST_LSM6DSX_ID_GYRO:
break;
+ case ST_LSM6DSX_ID_TEMP:
+ /*
+ * According to the application note AN5398 Rev 3
+ * for ISM330DHCX, section 10, page 109
+ * the ODR for the temperature sensor is equal to the
+ * accelerometer ODR if the gyroscope is powered-down,
+ * up to 52 Hz, but constant 52 Hz if the gyroscope
+ * is powered on. It never goes above 52 Hz.
+ */
+ ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
+ if ((req_odr > 0) && (hw->enable_mask |= BIT(ref_sensor->id)))
+ /* Gyro is on! ODR fixed to 52 Hz */
+ return 0;
+ /* We fall through and activate accelerometer if need be */
+ fallthrough;
case ST_LSM6DSX_ID_EXT0:
case ST_LSM6DSX_ID_EXT1:
case ST_LSM6DSX_ID_EXT2:
@@ -1800,6 +1839,10 @@ static int st_lsm6dsx_read_raw(struct iio_dev *iio_dev,
*val2 = sensor->gain;
ret = IIO_VAL_INT_PLUS_NANO;
break;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = sensor->offset;
+ ret = IIO_VAL_INT;
+ break;
default:
ret = -EINVAL;
break;
@@ -2106,6 +2149,22 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
.write_raw_get_fmt = st_lsm6dsx_write_raw_get_fmt,
};
+static struct attribute *st_lsm6dsx_temp_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_temp_attribute_group = {
+ .attrs = st_lsm6dsx_temp_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_temp_info = {
+ .attrs = &st_lsm6dsx_temp_attribute_group,
+ .read_raw = st_lsm6dsx_read_raw,
+ .write_raw = st_lsm6dsx_write_raw,
+ .hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+};
+
static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
{
struct device *dev = hw->dev;
@@ -2379,7 +2438,16 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
sensor->id = id;
sensor->hw = hw;
sensor->odr = hw->settings->odr_table[id].odr_avl[0].milli_hz;
- sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
+ if (id == ST_LSM6DSX_ID_TEMP) {
+ /*
+ * The temperature sensor has a fixed scale and offset such
+ * that: temp_C = (raw / 256) + 25
+ */
+ sensor->gain = 3906;
+ sensor->offset = 25;
+ } else {
+ sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
+ }
sensor->watermark = 1;
switch (id) {
@@ -2393,6 +2461,11 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
name);
break;
+ case ST_LSM6DSX_ID_TEMP:
+ iio_dev->info = &st_lsm6dsx_temp_info;
+ scnprintf(sensor->name, sizeof(sensor->name), "%s_temp",
+ name);
+ break;
default:
return NULL;
}
---
base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
change-id: 20230811-iio-spacex-lsm6ds0-33c9365e94bf
Best regards,
--
Linus Walleij <linus.walleij@xxxxxxxxxx>