[PATCH v2 1/6] arm64: dts: ls1043a: remove second dspi node

[Gregor Herburger]

According to the documentation the ls1043a has only one spi controller.
So remove the second one.

Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index f8acbefc805b..229bb4bebe42 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -526,20 +526,6 @@ dspi0: spi@2100000 {
 			status = "disabled";
 		};
 
-		dspi1: spi@2110000 {
-			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2110000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
-			clock-names = "dspi";
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(1)>;
-			spi-num-chipselects = <5>;
-			big-endian;
-			status = "disabled";
-		};
-
 		i2c0: i2c@2180000 {
 			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;

-- 
2.34.1