Re: [PATCH v5 4/5] remoteproc: k3: Split out functions common with M4 driver

[Mathieu Poirier]

On Mon, Aug 07, 2023 at 11:45:28PM -0500, Hari Nagalla wrote:
> From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
> 
> In the next commit we will be adding the M4F driver which shares a lot of
> commonality with the DSP driver. Split this shared functionality out so
> that it can be used by both drivers.
> 
> Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
> Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
> ---
> Changes since v2:
>  - New patch (reordered refactored from v2)
> 
> Changes since v3:
>  - Removed "ipc_only" element from k3_rproc structure
>  - Refactored to bring 3 more common functions
>  
> Changes since v4:
>  - None
> 
>  drivers/remoteproc/Makefile               |   2 +-
>  drivers/remoteproc/ti_k3_common.c         | 513 +++++++++++++++++++
>  drivers/remoteproc/ti_k3_common.h         | 103 ++++
>  drivers/remoteproc/ti_k3_dsp_remoteproc.c | 598 ++--------------------
>  4 files changed, 646 insertions(+), 570 deletions(-)
>  create mode 100644 drivers/remoteproc/ti_k3_common.c
>  create mode 100644 drivers/remoteproc/ti_k3_common.h

This patch is hard to follow because of all the things it does.  Please do the
structures in one patch and the functions in another.

> 
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 91314a9b43ce..55c552e27a45 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -36,6 +36,6 @@ obj-$(CONFIG_RCAR_REMOTEPROC)		+= rcar_rproc.o
>  obj-$(CONFIG_ST_REMOTEPROC)		+= st_remoteproc.o
>  obj-$(CONFIG_ST_SLIM_REMOTEPROC)	+= st_slim_rproc.o
>  obj-$(CONFIG_STM32_RPROC)		+= stm32_rproc.o
> -obj-$(CONFIG_TI_K3_DSP_REMOTEPROC)	+= ti_k3_dsp_remoteproc.o
> +obj-$(CONFIG_TI_K3_DSP_REMOTEPROC)	+= ti_k3_dsp_remoteproc.o ti_k3_common.o
>  obj-$(CONFIG_TI_K3_R5_REMOTEPROC)	+= ti_k3_r5_remoteproc.o
>  obj-$(CONFIG_XLNX_R5_REMOTEPROC)	+= xlnx_r5_remoteproc.o
> diff --git a/drivers/remoteproc/ti_k3_common.c b/drivers/remoteproc/ti_k3_common.c
> new file mode 100644
> index 000000000000..3dbf71296950
> --- /dev/null
> +++ b/drivers/remoteproc/ti_k3_common.c
> @@ -0,0 +1,513 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * TI K3 Remote Processor(s) driver common code
> + *
> + * Refactored from ti_k3_dsp_remoteproc.c.
> + *
> + * ti_k3_dsp_remoteproc.c:
> + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
> + *	Suman Anna <s-anna@xxxxxx>
> + */
> +
> +#include <linux/io.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/omap-mailbox.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include "omap_remoteproc.h"
> +#include "remoteproc_internal.h"
> +#include "ti_sci_proc.h"
> +#include "ti_k3_common.h"
> +
> +/*
> + * Kick the remote processor to notify about pending unprocessed messages.
> + * The vqid usage is not used and is inconsequential, as the kick is performed
> + * through a simulated GPIO (a bit in an IPC interrupt-triggering register),
> + * the remote processor is expected to process both its Tx and Rx virtqueues.
> + */
> +void k3_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	struct device *dev = rproc->dev.parent;
> +	mbox_msg_t msg = (mbox_msg_t)vqid;
> +	int ret;
> +
> +	/* send the index of the triggered virtqueue in the mailbox payload */
> +	ret = mbox_send_message(kproc->mbox, (void *)msg);
> +	if (ret < 0)
> +		dev_err(dev, "failed to send mailbox message, status = %d\n",
> +			ret);
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_kick);

In ti_k3_dsp_remoteproc.c function k3_dsp_rproc_mbox_callback() is the first one
whereas here it is way down in the file.  When doing a refactoring such as this
one please keep the function order as close as possible to the original file so
that it is easier to digest the material.  Right now I have to fish out each
function from the original file and it is very time consuming.

> +
> +/* Put the remote processor into reset */
> +int k3_rproc_reset(struct k3_rproc *kproc)
> +{
> +	struct device *dev = kproc->dev;
> +	int ret;
> +
> +	ret = reset_control_assert(kproc->reset);
> +	if (ret) {
> +		dev_err(dev, "local-reset assert failed, ret = %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (kproc->data->uses_lreset)
> +		return ret;
> +
> +	ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> +						    kproc->ti_sci_id);
> +	if (ret) {
> +		dev_err(dev, "module-reset assert failed, ret = %d\n", ret);
> +		if (reset_control_deassert(kproc->reset))
> +			dev_warn(dev, "local-reset deassert back failed\n");
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_reset);
> +
> +/* Release the remote processor from reset */
> +int k3_rproc_release(struct k3_rproc *kproc)
> +{
> +	struct device *dev = kproc->dev;
> +	int ret;
> +
> +	if (kproc->data->uses_lreset)
> +		goto lreset;
> +
> +	ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci,
> +						    kproc->ti_sci_id);
> +	if (ret) {
> +		dev_err(dev, "module-reset deassert failed, ret = %d\n", ret);
> +		return ret;
> +	}
> +
> +lreset:
> +	ret = reset_control_deassert(kproc->reset);
> +	if (ret) {
> +		dev_err(dev, "local-reset deassert failed, ret = %d\n", ret);
> +		if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> +							  kproc->ti_sci_id))
> +			dev_warn(dev, "module-reset assert back failed\n");
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_release);
> +
> +/*
> + * This function implements the .get_loaded_rsc_table() callback and is used
> + * to provide the resource table for a booted remote processor in IPC-only
> + * mode. The remote processor firmwares follow a design-by-contract approach
> + * and are expected to have the resource table at the base of the DDR region
> + * reserved for firmware usage. This provides flexibility for the remote
> + * processor to be booted by different bootloaders that may or may not have the
> + * ability to publish the resource table address and size through a DT
> + * property.
> + */
> +struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc,
> +					       size_t *rsc_table_sz)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	struct device *dev = kproc->dev;
> +
> +	if (!kproc->rmem[0].cpu_addr) {
> +		dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found");
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	/*
> +	 * NOTE: The resource table size is currently hard-coded to a maximum
> +	 * of 256 bytes. The most common resource table usage for K3 firmwares
> +	 * is to only have the vdev resource entry and an optional trace entry.
> +	 * The exact size could be computed based on resource table address, but
> +	 * the hard-coded value suffices to support the IPC-only mode.
> +	 */
> +	*rsc_table_sz = 256;
> +	return (struct resource_table *)kproc->rmem[0].cpu_addr;
> +}
> +EXPORT_SYMBOL_GPL(k3_get_loaded_rsc_table);
> +
> +/*
> + * Custom function to translate a remote processor device address (internal
> + * RAMs only) to a kernel virtual address.  The remote processors can access
> + * their RAMs at either an internal address visible only from a remote
> + * processor, or at the SoC-level bus address. Both these addresses need to be
> + * looked through for translation. The translated addresses can be used either
> + * by the remoteproc core for loading (when using kernel remoteproc loader), or
> + * by any rpmsg bus drivers.
> + */
> +void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	void __iomem *va = NULL;
> +	phys_addr_t bus_addr;
> +	u32 dev_addr, offset;
> +	size_t size;
> +	int i;
> +
> +	if (len == 0)
> +		return NULL;
> +
> +	for (i = 0; i < kproc->num_mems; i++) {
> +		bus_addr = kproc->mem[i].bus_addr;
> +		dev_addr = kproc->mem[i].dev_addr;
> +		size = kproc->mem[i].size;
> +
> +		if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) {
> +			/* handle remote-view addresses */
> +			if (da >= dev_addr &&
> +			    ((da + len) <= (dev_addr + size))) {
> +				offset = da - dev_addr;
> +				va = kproc->mem[i].cpu_addr + offset;
> +				return (__force void *)va;
> +			}
> +		} else {
> +			/* handle SoC-view addresses */
> +			if (da >= bus_addr &&
> +			    (da + len) <= (bus_addr + size)) {
> +				offset = da - bus_addr;
> +				va = kproc->mem[i].cpu_addr + offset;
> +				return (__force void *)va;
> +			}
> +		}
> +	}
> +
> +	/* handle static DDR reserved memory regions */
> +	for (i = 0; i < kproc->num_rmems; i++) {
> +		dev_addr = kproc->rmem[i].dev_addr;
> +		size = kproc->rmem[i].size;
> +
> +		if (da >= dev_addr && ((da + len) <= (dev_addr + size))) {
> +			offset = da - dev_addr;
> +			va = kproc->rmem[i].cpu_addr + offset;
> +			return (__force void *)va;
> +		}
> +	}
> +
> +	return NULL;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_da_to_va);
> +
> +int k3_rproc_of_get_memories(struct platform_device *pdev,
> +			     struct k3_rproc *kproc)
> +{
> +	const struct k3_rproc_dev_data *data = kproc->data;
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	int num_mems = 0;
> +	int i;
> +
> +	num_mems = kproc->data->num_mems;
> +	kproc->mem = devm_kcalloc(kproc->dev, num_mems,
> +				  sizeof(*kproc->mem), GFP_KERNEL);
> +	if (!kproc->mem)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < num_mems; i++) {
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						   data->mems[i].name);
> +		if (!res) {
> +			dev_err(dev, "found no memory resource for %s\n",
> +				data->mems[i].name);
> +			return -EINVAL;
> +		}
> +		if (!devm_request_mem_region(dev, res->start,
> +					     resource_size(res),
> +					     dev_name(dev))) {
> +			dev_err(dev, "could not request %s region for resource\n",
> +				data->mems[i].name);
> +			return -EBUSY;
> +		}
> +
> +		kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start,
> +							 resource_size(res));
> +		if (!kproc->mem[i].cpu_addr) {
> +			dev_err(dev, "failed to map %s memory\n",
> +				data->mems[i].name);
> +			return -ENOMEM;
> +		}
> +		kproc->mem[i].bus_addr = res->start;
> +		kproc->mem[i].dev_addr = data->mems[i].dev_addr;
> +		kproc->mem[i].size = resource_size(res);
> +
> +		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n",
> +			data->mems[i].name, &kproc->mem[i].bus_addr,
> +			kproc->mem[i].size, kproc->mem[i].cpu_addr,
> +			kproc->mem[i].dev_addr);
> +	}
> +	kproc->num_mems = num_mems;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_of_get_memories);
> +
> +int k3_reserved_mem_init(struct k3_rproc *kproc)
> +{
> +	struct device *dev = kproc->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *rmem_np;
> +	struct reserved_mem *rmem;
> +	int num_rmems;
> +	int ret, i;
> +
> +	num_rmems = of_property_count_elems_of_size(np, "memory-region",
> +						    sizeof(phandle));
> +	if (num_rmems <= 0) {
> +		dev_err(dev, "device does not reserved memory regions, ret = %d\n",
> +			num_rmems);
> +		return -EINVAL;
> +	}
> +	if (num_rmems < 2) {
> +		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
> +			num_rmems);
> +		return -EINVAL;
> +	}
> +
> +	/* use reserved memory region 0 for vring DMA allocations */
> +	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
> +	if (ret) {
> +		dev_err(dev, "device cannot initialize DMA pool, ret = %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	num_rmems--;
> +	kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
> +	if (!kproc->rmem) {
> +		ret = -ENOMEM;
> +		goto release_rmem;
> +	}
> +
> +	/* use remaining reserved memory regions for static carveouts */
> +	for (i = 0; i < num_rmems; i++) {
> +		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
> +		if (!rmem_np) {
> +			ret = -EINVAL;
> +			goto unmap_rmem;
> +		}
> +
> +		rmem = of_reserved_mem_lookup(rmem_np);
> +		if (!rmem) {
> +			of_node_put(rmem_np);
> +			ret = -EINVAL;
> +			goto unmap_rmem;
> +		}
> +		of_node_put(rmem_np);
> +
> +		kproc->rmem[i].bus_addr = rmem->base;
> +		/* 64-bit address regions currently not supported */
> +		kproc->rmem[i].dev_addr = (u32)rmem->base;
> +		kproc->rmem[i].size = rmem->size;
> +		kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size);
> +		if (!kproc->rmem[i].cpu_addr) {
> +			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
> +				i + 1, &rmem->base, &rmem->size);
> +			ret = -ENOMEM;
> +			goto unmap_rmem;
> +		}
> +
> +		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
> +			i + 1, &kproc->rmem[i].bus_addr,
> +			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
> +			kproc->rmem[i].dev_addr);
> +	}
> +	kproc->num_rmems = num_rmems;
> +
> +	return 0;
> +
> +unmap_rmem:
> +	for (i--; i >= 0; i--)
> +		iounmap(kproc->rmem[i].cpu_addr);
> +	kfree(kproc->rmem);
> +release_rmem:
> +	of_reserved_mem_device_release(kproc->dev);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(k3_reserved_mem_init);
> +
> +void k3_reserved_mem_exit(struct k3_rproc *kproc)
> +{
> +	int i;
> +
> +	for (i = 0; i < kproc->num_rmems; i++)
> +		iounmap(kproc->rmem[i].cpu_addr);
> +	kfree(kproc->rmem);
> +
> +	of_reserved_mem_device_release(kproc->dev);
> +}
> +EXPORT_SYMBOL_GPL(k3_reserved_mem_exit);
> +
> +struct ti_sci_proc *k3_rproc_of_get_tsp(struct device *dev,
> +					const struct ti_sci_handle *sci)
> +{
> +	struct ti_sci_proc *tsp;
> +	u32 temp[2];
> +	int ret;
> +
> +	ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids",
> +					 temp, 2);
> +	if (ret < 0)
> +		return ERR_PTR(ret);
> +
> +	tsp = kzalloc(sizeof(*tsp), GFP_KERNEL);
> +	if (!tsp)
> +		return ERR_PTR(-ENOMEM);
> +
> +	tsp->dev = dev;
> +	tsp->sci = sci;
> +	tsp->ops = &sci->ops.proc_ops;
> +	tsp->proc_id = temp[0];
> +	tsp->host_id = temp[1];
> +
> +	return tsp;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_of_get_tsp);
> +
> +/**
> + * k3_rproc_mbox_callback() - inbound mailbox message handler
> + * @client: mailbox client pointer used for requesting the mailbox channel
> + * @data: mailbox payload
> + *
> + * This handler is invoked by the K3 mailbox driver whenever a mailbox
> + * message is received. Usually, the mailbox payload simply contains
> + * the index of the virtqueue that is kicked by the remote processor,
> + * and we let remoteproc core handle it.
> + *
> + * In addition to virtqueue indices, we also have some out-of-band values
> + * that indicate different events. Those values are deliberately very
> + * large so they don't coincide with virtqueue indices.
> + */
> +static void k3_rproc_mbox_callback(struct mbox_client *client, void *data)
> +{
> +	struct k3_rproc *kproc = container_of(client, struct k3_rproc,
> +						  client);
> +	struct device *dev = kproc->rproc->dev.parent;
> +	const char *name = kproc->rproc->name;
> +	u32 msg = omap_mbox_message(data);
> +
> +	dev_dbg(dev, "mbox msg: 0x%x\n", msg);
> +
> +	switch (msg) {
> +	case RP_MBOX_CRASH:
> +		/*
> +		 * remoteproc detected an exception, but error recovery is not
> +		 * supported. So, just log this for now
> +		 */
> +		dev_err(dev, "K3 rproc %s crashed\n", name);
> +		break;
> +	case RP_MBOX_ECHO_REPLY:
> +		dev_info(dev, "received echo reply from %s\n", name);
> +		break;
> +	default:
> +		/* silently handle all other valid messages */
> +		if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
> +			return;
> +		if (msg > kproc->rproc->max_notifyid) {
> +			dev_dbg(dev, "dropping unknown message 0x%x", msg);
> +			return;
> +		}
> +		/* msg contains the index of the triggered vring */
> +		if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE)
> +			dev_dbg(dev, "no message was found in vqid %d\n", msg);
> +	}
> +}
> +
> +int k3_rproc_request_mbox(struct rproc *rproc)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	struct mbox_client *client = &kproc->client;
> +	struct device *dev = kproc->dev;
> +	int ret;
> +
> +	client->dev = dev;
> +	client->tx_done = NULL;
> +	client->rx_callback = k3_rproc_mbox_callback;
> +	client->tx_block = false;
> +	client->knows_txdone = false;
> +
> +	kproc->mbox = mbox_request_channel(client, 0);
> +	if (IS_ERR(kproc->mbox)) {
> +		ret = -EBUSY;
> +		dev_err(dev, "mbox_request_channel failed: %ld\n",
> +			PTR_ERR(kproc->mbox));
> +		return ret;
> +	}
> +
> +	/*
> +	 * Ping the remote processor, this is only for sanity-sake for now;
> +	 * there is no functional effect whatsoever.
> +	 *
> +	 * Note that the reply will _not_ arrive immediately: this message
> +	 * will wait in the mailbox fifo until the remote processor is booted.
> +	 */
> +	ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
> +	if (ret < 0) {
> +		dev_err(dev, "mbox_send_message failed: %d\n", ret);
> +		mbox_free_channel(kproc->mbox);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_request_mbox);
> +
> +/*
> + * The DSP and MCU cores have a local reset that affects only the CPU, and a
> + * generic module reset that powers on the device and allows the internal
> + * memories to be accessed while the local reset is asserted. This function is
> + * used to release the global reset on remote cores to allow loading into the
> + * internal RAMs. The .prepare() ops is invoked by remoteproc core before any
> + * firmware loading, and is followed by the .start() ops after loading to
> + * actually let the remote cores to run. This callback is invoked only in
> + * remoteproc mode.
> + */
> +int k3_rproc_prepare(struct rproc *rproc)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	struct device *dev = kproc->dev;
> +	int ret;
> +
> +	ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci,
> +						    kproc->ti_sci_id);
> +	if (ret)
> +		dev_err(dev, "module-reset deassert failed, cannot enable internal RAM loading, ret = %d\n",
> +			ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_prepare);
> +
> +/*
> + * This function implements the .unprepare() ops and performs the complimentary
> + * operations to that of the .prepare() ops. The function is used to assert the
> + * global reset on applicable DSP, MCU cores. This completes the second portion of
> + * powering down the remote core. The cores themselves are only halted in the
> + * .stop() callback through the local reset, and the .unprepare() ops is invoked
> + * by the remoteproc core after the remoteproc is stopped to balance the global
> + * reset. This callback is invoked only in remoteproc mode.
> + */
> +int k3_rproc_unprepare(struct rproc *rproc)
> +{
> +	struct k3_rproc *kproc = rproc->priv;
> +	struct device *dev = kproc->dev;
> +	int ret;
> +
> +	ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> +						    kproc->ti_sci_id);
> +	if (ret)
> +		dev_err(dev, "module-reset assert failed, ret = %d\n", ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(k3_rproc_unprepare);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("TI K3 common Remoteproc support");
> diff --git a/drivers/remoteproc/ti_k3_common.h b/drivers/remoteproc/ti_k3_common.h
> new file mode 100644
> index 000000000000..917a9c82b4cf
> --- /dev/null
> +++ b/drivers/remoteproc/ti_k3_common.h
> @@ -0,0 +1,103 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * TI K3 Remote Processor(s) driver common code
> + *
> + * Refactored from ti_k3_dsp_remoteproc.c.
> + *
> + * ti_k3_dsp_remoteproc.c:
> + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
> + *	Suman Anna <s-anna@xxxxxx>
> + */
> +
> +#ifndef REMOTEPROC_TI_K3_COMMON_H
> +#define REMOTEPROC_TI_K3_COMMON_H
> +
> +#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK	(SZ_16M - 1)
> +
> +/**
> + * struct k3_rproc_mem - internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: Bus address used to access the memory region
> + * @dev_addr: Device address of the memory region from DSP view
> + * @size: Size of the memory region
> + */
> +struct k3_rproc_mem {
> +	void __iomem *cpu_addr;
> +	phys_addr_t bus_addr;
> +	u32 dev_addr;
> +	size_t size;
> +};
> +
> +/**
> + * struct k3_rproc_mem_data - memory definitions for a DSP
> + * @name: name for this memory entry
> + * @dev_addr: device address for the memory entry
> + */
> +struct k3_rproc_mem_data {
> +	const char *name;
> +	const u32 dev_addr;
> +};
> +
> +/**
> + * struct k3_rproc_dev_data - device data structure for a DSP
> + * @mems: pointer to memory definitions for a DSP
> + * @num_mems: number of memory regions in @mems
> + * @boot_align_addr: boot vector address alignment granularity
> + * @uses_lreset: flag to denote the need for local reset management
> + */
> +struct k3_rproc_dev_data {
> +	const struct k3_rproc_mem_data *mems;
> +	u32 num_mems;
> +	u32 boot_align_addr;
> +	bool uses_lreset;
> +};
> +
> +/**
> + * struct k3_rproc - k3 remote processor driver structure
> + * @dev: cached device pointer
> + * @rproc: remoteproc device handle
> + * @mem: internal memory regions data
> + * @num_mems: number of internal memory regions
> + * @rmem: reserved memory regions data
> + * @num_rmems: number of reserved memory regions
> + * @reset: reset control handle
> + * @data: pointer to device data
> + * @tsp: TI-SCI processor control handle
> + * @ti_sci: TI-SCI handle
> + * @ti_sci_id: TI-SCI device identifier
> + * @mbox: mailbox channel handle
> + * @client: mailbox client to request the mailbox channel
> + */
> +struct k3_rproc {
> +	struct device *dev;
> +	struct rproc *rproc;
> +	struct k3_rproc_mem *mem;
> +	int num_mems;
> +	struct k3_rproc_mem *rmem;
> +	int num_rmems;
> +	struct reset_control *reset;
> +	const struct k3_rproc_dev_data *data;
> +	struct ti_sci_proc *tsp;
> +	const struct ti_sci_handle *ti_sci;
> +	u32 ti_sci_id;
> +	struct mbox_chan *mbox;
> +	struct mbox_client client;
> +};
> +
> +void k3_rproc_kick(struct rproc *rproc, int vqid);
> +int k3_rproc_reset(struct k3_rproc *kproc);
> +int k3_rproc_release(struct k3_rproc *kproc);
> +struct resource_table *k3_get_loaded_rsc_table(struct rproc *rproc,
> +					       size_t *rsc_table_sz);
> +void *k3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len,
> +			bool *is_iomem);
> +int k3_rproc_of_get_memories(struct platform_device *pdev,
> +			     struct k3_rproc *kproc);
> +int k3_reserved_mem_init(struct k3_rproc *kproc);
> +void k3_reserved_mem_exit(struct k3_rproc *kproc);
> +struct ti_sci_proc *k3_rproc_of_get_tsp(struct device *dev,
> +					const struct ti_sci_handle *sci);
> +int k3_rproc_request_mbox(struct rproc *rproc);
> +int k3_rproc_prepare(struct rproc *rproc);
> +int k3_rproc_unprepare(struct rproc *rproc);
> +#endif /* REMOTEPROC_TI_K3_COMMON_H */
> diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> index ef8415a7cd54..48f9b37a77eb 100644
> --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> @@ -20,286 +20,8 @@
>  #include "omap_remoteproc.h"
>  #include "remoteproc_internal.h"
>  #include "ti_sci_proc.h"
> +#include "ti_k3_common.h"
>  
> -#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK	(SZ_16M - 1)
> -
> -/**
> - * struct k3_dsp_mem - internal memory structure
> - * @cpu_addr: MPU virtual address of the memory region
> - * @bus_addr: Bus address used to access the memory region
> - * @dev_addr: Device address of the memory region from DSP view
> - * @size: Size of the memory region
> - */
> -struct k3_dsp_mem {
> -	void __iomem *cpu_addr;
> -	phys_addr_t bus_addr;
> -	u32 dev_addr;
> -	size_t size;
> -};
> -
> -/**
> - * struct k3_dsp_mem_data - memory definitions for a DSP
> - * @name: name for this memory entry
> - * @dev_addr: device address for the memory entry
> - */
> -struct k3_dsp_mem_data {
> -	const char *name;
> -	const u32 dev_addr;
> -};
> -
> -/**
> - * struct k3_dsp_dev_data - device data structure for a DSP
> - * @mems: pointer to memory definitions for a DSP
> - * @num_mems: number of memory regions in @mems
> - * @boot_align_addr: boot vector address alignment granularity
> - * @uses_lreset: flag to denote the need for local reset management
> - */
> -struct k3_dsp_dev_data {
> -	const struct k3_dsp_mem_data *mems;
> -	u32 num_mems;
> -	u32 boot_align_addr;
> -	bool uses_lreset;
> -};
> -
> -/**
> - * struct k3_dsp_rproc - k3 DSP remote processor driver structure
> - * @dev: cached device pointer
> - * @rproc: remoteproc device handle
> - * @mem: internal memory regions data
> - * @num_mems: number of internal memory regions
> - * @rmem: reserved memory regions data
> - * @num_rmems: number of reserved memory regions
> - * @reset: reset control handle
> - * @data: pointer to DSP-specific device data
> - * @tsp: TI-SCI processor control handle
> - * @ti_sci: TI-SCI handle
> - * @ti_sci_id: TI-SCI device identifier
> - * @mbox: mailbox channel handle
> - * @client: mailbox client to request the mailbox channel
> - */
> -struct k3_dsp_rproc {
> -	struct device *dev;
> -	struct rproc *rproc;
> -	struct k3_dsp_mem *mem;
> -	int num_mems;
> -	struct k3_dsp_mem *rmem;
> -	int num_rmems;
> -	struct reset_control *reset;
> -	const struct k3_dsp_dev_data *data;
> -	struct ti_sci_proc *tsp;
> -	const struct ti_sci_handle *ti_sci;
> -	u32 ti_sci_id;
> -	struct mbox_chan *mbox;
> -	struct mbox_client client;
> -};
> -
> -/**
> - * k3_dsp_rproc_mbox_callback() - inbound mailbox message handler
> - * @client: mailbox client pointer used for requesting the mailbox channel
> - * @data: mailbox payload
> - *
> - * This handler is invoked by the OMAP mailbox driver whenever a mailbox
> - * message is received. Usually, the mailbox payload simply contains
> - * the index of the virtqueue that is kicked by the remote processor,
> - * and we let remoteproc core handle it.
> - *
> - * In addition to virtqueue indices, we also have some out-of-band values
> - * that indicate different events. Those values are deliberately very
> - * large so they don't coincide with virtqueue indices.
> - */
> -static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data)
> -{
> -	struct k3_dsp_rproc *kproc = container_of(client, struct k3_dsp_rproc,
> -						  client);
> -	struct device *dev = kproc->rproc->dev.parent;
> -	const char *name = kproc->rproc->name;
> -	u32 msg = omap_mbox_message(data);
> -
> -	dev_dbg(dev, "mbox msg: 0x%x\n", msg);
> -
> -	switch (msg) {
> -	case RP_MBOX_CRASH:
> -		/*
> -		 * remoteproc detected an exception, but error recovery is not
> -		 * supported. So, just log this for now
> -		 */
> -		dev_err(dev, "K3 DSP rproc %s crashed\n", name);
> -		break;
> -	case RP_MBOX_ECHO_REPLY:
> -		dev_info(dev, "received echo reply from %s\n", name);
> -		break;
> -	default:
> -		/* silently handle all other valid messages */
> -		if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
> -			return;
> -		if (msg > kproc->rproc->max_notifyid) {
> -			dev_dbg(dev, "dropping unknown message 0x%x", msg);
> -			return;
> -		}
> -		/* msg contains the index of the triggered vring */
> -		if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE)
> -			dev_dbg(dev, "no message was found in vqid %d\n", msg);
> -	}
> -}
> -
> -/*
> - * Kick the remote processor to notify about pending unprocessed messages.
> - * The vqid usage is not used and is inconsequential, as the kick is performed
> - * through a simulated GPIO (a bit in an IPC interrupt-triggering register),
> - * the remote processor is expected to process both its Tx and Rx virtqueues.
> - */
> -static void k3_dsp_rproc_kick(struct rproc *rproc, int vqid)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	struct device *dev = rproc->dev.parent;
> -	mbox_msg_t msg = (mbox_msg_t)vqid;
> -	int ret;
> -
> -	/* send the index of the triggered virtqueue in the mailbox payload */
> -	ret = mbox_send_message(kproc->mbox, (void *)msg);
> -	if (ret < 0)
> -		dev_err(dev, "failed to send mailbox message, status = %d\n",
> -			ret);
> -}
> -
> -/* Put the DSP processor into reset */
> -static int k3_dsp_rproc_reset(struct k3_dsp_rproc *kproc)
> -{
> -	struct device *dev = kproc->dev;
> -	int ret;
> -
> -	ret = reset_control_assert(kproc->reset);
> -	if (ret) {
> -		dev_err(dev, "local-reset assert failed, ret = %d\n", ret);
> -		return ret;
> -	}
> -
> -	if (kproc->data->uses_lreset)
> -		return ret;
> -
> -	ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> -						    kproc->ti_sci_id);
> -	if (ret) {
> -		dev_err(dev, "module-reset assert failed, ret = %d\n", ret);
> -		if (reset_control_deassert(kproc->reset))
> -			dev_warn(dev, "local-reset deassert back failed\n");
> -	}
> -
> -	return ret;
> -}
> -
> -/* Release the DSP processor from reset */
> -static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc)
> -{
> -	struct device *dev = kproc->dev;
> -	int ret;
> -
> -	if (kproc->data->uses_lreset)
> -		goto lreset;
> -
> -	ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci,
> -						    kproc->ti_sci_id);
> -	if (ret) {
> -		dev_err(dev, "module-reset deassert failed, ret = %d\n", ret);
> -		return ret;
> -	}
> -
> -lreset:
> -	ret = reset_control_deassert(kproc->reset);
> -	if (ret) {
> -		dev_err(dev, "local-reset deassert failed, ret = %d\n", ret);
> -		if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> -							  kproc->ti_sci_id))
> -			dev_warn(dev, "module-reset assert back failed\n");
> -	}
> -
> -	return ret;
> -}
> -
> -static int k3_dsp_rproc_request_mbox(struct rproc *rproc)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	struct mbox_client *client = &kproc->client;
> -	struct device *dev = kproc->dev;
> -	int ret;
> -
> -	client->dev = dev;
> -	client->tx_done = NULL;
> -	client->rx_callback = k3_dsp_rproc_mbox_callback;
> -	client->tx_block = false;
> -	client->knows_txdone = false;
> -
> -	kproc->mbox = mbox_request_channel(client, 0);
> -	if (IS_ERR(kproc->mbox)) {
> -		ret = -EBUSY;
> -		dev_err(dev, "mbox_request_channel failed: %ld\n",
> -			PTR_ERR(kproc->mbox));
> -		return ret;
> -	}
> -
> -	/*
> -	 * Ping the remote processor, this is only for sanity-sake for now;
> -	 * there is no functional effect whatsoever.
> -	 *
> -	 * Note that the reply will _not_ arrive immediately: this message
> -	 * will wait in the mailbox fifo until the remote processor is booted.
> -	 */
> -	ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
> -	if (ret < 0) {
> -		dev_err(dev, "mbox_send_message failed: %d\n", ret);
> -		mbox_free_channel(kproc->mbox);
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -/*
> - * The C66x DSP cores have a local reset that affects only the CPU, and a
> - * generic module reset that powers on the device and allows the DSP internal
> - * memories to be accessed while the local reset is asserted. This function is
> - * used to release the global reset on C66x DSPs to allow loading into the DSP
> - * internal RAMs. The .prepare() ops is invoked by remoteproc core before any
> - * firmware loading, and is followed by the .start() ops after loading to
> - * actually let the C66x DSP cores run. This callback is invoked only in
> - * remoteproc mode.
> - */
> -static int k3_dsp_rproc_prepare(struct rproc *rproc)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	struct device *dev = kproc->dev;
> -	int ret;
> -
> -	ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci,
> -						    kproc->ti_sci_id);
> -	if (ret)
> -		dev_err(dev, "module-reset deassert failed, cannot enable internal RAM loading, ret = %d\n",
> -			ret);
> -
> -	return ret;
> -}
> -
> -/*
> - * This function implements the .unprepare() ops and performs the complimentary
> - * operations to that of the .prepare() ops. The function is used to assert the
> - * global reset on applicable C66x cores. This completes the second portion of
> - * powering down the C66x DSP cores. The cores themselves are only halted in the
> - * .stop() callback through the local reset, and the .unprepare() ops is invoked
> - * by the remoteproc core after the remoteproc is stopped to balance the global
> - * reset. This callback is invoked only in remoteproc mode.
> - */
> -static int k3_dsp_rproc_unprepare(struct rproc *rproc)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	struct device *dev = kproc->dev;
> -	int ret;
> -
> -	ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci,
> -						    kproc->ti_sci_id);
> -	if (ret)
> -		dev_err(dev, "module-reset assert failed, ret = %d\n", ret);
> -
> -	return ret;
> -}
>  
>  /*
>   * Power up the DSP remote processor.
> @@ -310,12 +32,12 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc)
>   */
>  static int k3_dsp_rproc_start(struct rproc *rproc)
>  {
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> +	struct k3_rproc *kproc = rproc->priv;
>  	struct device *dev = kproc->dev;
>  	u32 boot_addr;
>  	int ret;
>  
> -	ret = k3_dsp_rproc_request_mbox(rproc);
> +	ret = k3_rproc_request_mbox(rproc);
>  	if (ret)
>  		return ret;
>  
> @@ -332,7 +54,7 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
>  	if (ret)
>  		goto put_mbox;
>  
> -	ret = k3_dsp_rproc_release(kproc);
> +	ret = k3_rproc_release(kproc);
>  	if (ret)
>  		goto put_mbox;
>  
> @@ -351,11 +73,11 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
>   */
>  static int k3_dsp_rproc_stop(struct rproc *rproc)
>  {
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> +	struct k3_rproc *kproc = rproc->priv;
>  
>  	mbox_free_channel(kproc->mbox);
>  
> -	k3_dsp_rproc_reset(kproc);
> +	k3_rproc_reset(kproc);
>  
>  	return 0;
>  }
> @@ -370,11 +92,11 @@ static int k3_dsp_rproc_stop(struct rproc *rproc)
>   */
>  static int k3_dsp_rproc_attach(struct rproc *rproc)
>  {
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> +	struct k3_rproc *kproc = rproc->priv;
>  	struct device *dev = kproc->dev;
>  	int ret;
>  
> -	ret = k3_dsp_rproc_request_mbox(rproc);
> +	ret = k3_rproc_request_mbox(rproc);
>  	if (ret)
>  		return ret;
>  
> @@ -392,7 +114,7 @@ static int k3_dsp_rproc_attach(struct rproc *rproc)
>   */
>  static int k3_dsp_rproc_detach(struct rproc *rproc)
>  {
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> +	struct k3_rproc *kproc = rproc->priv;
>  	struct device *dev = kproc->dev;
>  
>  	mbox_free_channel(kproc->mbox);
> @@ -400,282 +122,20 @@ static int k3_dsp_rproc_detach(struct rproc *rproc)
>  	return 0;
>  }
>  
> -/*
> - * This function implements the .get_loaded_rsc_table() callback and is used
> - * to provide the resource table for a booted DSP in IPC-only mode. The K3 DSP
> - * firmwares follow a design-by-contract approach and are expected to have the
> - * resource table at the base of the DDR region reserved for firmware usage.
> - * This provides flexibility for the remote processor to be booted by different
> - * bootloaders that may or may not have the ability to publish the resource table
> - * address and size through a DT property. This callback is invoked only in
> - * IPC-only mode.
> - */
> -static struct resource_table *k3_dsp_get_loaded_rsc_table(struct rproc *rproc,
> -							  size_t *rsc_table_sz)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	struct device *dev = kproc->dev;
> -
> -	if (!kproc->rmem[0].cpu_addr) {
> -		dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found");
> -		return ERR_PTR(-ENOMEM);
> -	}
> -
> -	/*
> -	 * NOTE: The resource table size is currently hard-coded to a maximum
> -	 * of 256 bytes. The most common resource table usage for K3 firmwares
> -	 * is to only have the vdev resource entry and an optional trace entry.
> -	 * The exact size could be computed based on resource table address, but
> -	 * the hard-coded value suffices to support the IPC-only mode.
> -	 */
> -	*rsc_table_sz = 256;
> -	return (struct resource_table *)kproc->rmem[0].cpu_addr;
> -}
> -
> -/*
> - * Custom function to translate a DSP device address (internal RAMs only) to a
> - * kernel virtual address.  The DSPs can access their RAMs at either an internal
> - * address visible only from a DSP, or at the SoC-level bus address. Both these
> - * addresses need to be looked through for translation. The translated addresses
> - * can be used either by the remoteproc core for loading (when using kernel
> - * remoteproc loader), or by any rpmsg bus drivers.
> - */
> -static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
> -{
> -	struct k3_dsp_rproc *kproc = rproc->priv;
> -	void __iomem *va = NULL;
> -	phys_addr_t bus_addr;
> -	u32 dev_addr, offset;
> -	size_t size;
> -	int i;
> -
> -	if (len == 0)
> -		return NULL;
> -
> -	for (i = 0; i < kproc->num_mems; i++) {
> -		bus_addr = kproc->mem[i].bus_addr;
> -		dev_addr = kproc->mem[i].dev_addr;
> -		size = kproc->mem[i].size;
> -
> -		if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) {
> -			/* handle DSP-view addresses */
> -			if (da >= dev_addr &&
> -			    ((da + len) <= (dev_addr + size))) {
> -				offset = da - dev_addr;
> -				va = kproc->mem[i].cpu_addr + offset;
> -				return (__force void *)va;
> -			}
> -		} else {
> -			/* handle SoC-view addresses */
> -			if (da >= bus_addr &&
> -			    (da + len) <= (bus_addr + size)) {
> -				offset = da - bus_addr;
> -				va = kproc->mem[i].cpu_addr + offset;
> -				return (__force void *)va;
> -			}
> -		}
> -	}
> -
> -	/* handle static DDR reserved memory regions */
> -	for (i = 0; i < kproc->num_rmems; i++) {
> -		dev_addr = kproc->rmem[i].dev_addr;
> -		size = kproc->rmem[i].size;
> -
> -		if (da >= dev_addr && ((da + len) <= (dev_addr + size))) {
> -			offset = da - dev_addr;
> -			va = kproc->rmem[i].cpu_addr + offset;
> -			return (__force void *)va;
> -		}
> -	}
> -
> -	return NULL;
> -}
>  
>  static const struct rproc_ops k3_dsp_rproc_ops = {
>  	.start		= k3_dsp_rproc_start,
>  	.stop		= k3_dsp_rproc_stop,
> -	.kick		= k3_dsp_rproc_kick,
> -	.da_to_va	= k3_dsp_rproc_da_to_va,
> +	.kick		= k3_rproc_kick,
> +	.da_to_va	= k3_rproc_da_to_va,
>  };
>  
> -static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev,
> -					struct k3_dsp_rproc *kproc)
> -{
> -	const struct k3_dsp_dev_data *data = kproc->data;
> -	struct device *dev = &pdev->dev;
> -	struct resource *res;
> -	int num_mems = 0;
> -	int i;
> -
> -	num_mems = kproc->data->num_mems;
> -	kproc->mem = devm_kcalloc(kproc->dev, num_mems,
> -				  sizeof(*kproc->mem), GFP_KERNEL);
> -	if (!kproc->mem)
> -		return -ENOMEM;
> -
> -	for (i = 0; i < num_mems; i++) {
> -		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> -						   data->mems[i].name);
> -		if (!res) {
> -			dev_err(dev, "found no memory resource for %s\n",
> -				data->mems[i].name);
> -			return -EINVAL;
> -		}
> -		if (!devm_request_mem_region(dev, res->start,
> -					     resource_size(res),
> -					     dev_name(dev))) {
> -			dev_err(dev, "could not request %s region for resource\n",
> -				data->mems[i].name);
> -			return -EBUSY;
> -		}
> -
> -		kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start,
> -							 resource_size(res));
> -		if (!kproc->mem[i].cpu_addr) {
> -			dev_err(dev, "failed to map %s memory\n",
> -				data->mems[i].name);
> -			return -ENOMEM;
> -		}
> -		kproc->mem[i].bus_addr = res->start;
> -		kproc->mem[i].dev_addr = data->mems[i].dev_addr;
> -		kproc->mem[i].size = resource_size(res);
> -
> -		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n",
> -			data->mems[i].name, &kproc->mem[i].bus_addr,
> -			kproc->mem[i].size, kproc->mem[i].cpu_addr,
> -			kproc->mem[i].dev_addr);
> -	}
> -	kproc->num_mems = num_mems;
> -
> -	return 0;
> -}
> -
> -static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
> -{
> -	struct device *dev = kproc->dev;
> -	struct device_node *np = dev->of_node;
> -	struct device_node *rmem_np;
> -	struct reserved_mem *rmem;
> -	int num_rmems;
> -	int ret, i;
> -
> -	num_rmems = of_property_count_elems_of_size(np, "memory-region",
> -						    sizeof(phandle));
> -	if (num_rmems <= 0) {
> -		dev_err(dev, "device does not reserved memory regions, ret = %d\n",
> -			num_rmems);
> -		return -EINVAL;
> -	}
> -	if (num_rmems < 2) {
> -		dev_err(dev, "device needs at least two memory regions to be defined, num = %d\n",
> -			num_rmems);
> -		return -EINVAL;
> -	}
> -
> -	/* use reserved memory region 0 for vring DMA allocations */
> -	ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
> -	if (ret) {
> -		dev_err(dev, "device cannot initialize DMA pool, ret = %d\n",
> -			ret);
> -		return ret;
> -	}
> -
> -	num_rmems--;
> -	kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
> -	if (!kproc->rmem) {
> -		ret = -ENOMEM;
> -		goto release_rmem;
> -	}
> -
> -	/* use remaining reserved memory regions for static carveouts */
> -	for (i = 0; i < num_rmems; i++) {
> -		rmem_np = of_parse_phandle(np, "memory-region", i + 1);
> -		if (!rmem_np) {
> -			ret = -EINVAL;
> -			goto unmap_rmem;
> -		}
> -
> -		rmem = of_reserved_mem_lookup(rmem_np);
> -		if (!rmem) {
> -			of_node_put(rmem_np);
> -			ret = -EINVAL;
> -			goto unmap_rmem;
> -		}
> -		of_node_put(rmem_np);
> -
> -		kproc->rmem[i].bus_addr = rmem->base;
> -		/* 64-bit address regions currently not supported */
> -		kproc->rmem[i].dev_addr = (u32)rmem->base;
> -		kproc->rmem[i].size = rmem->size;
> -		kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size);
> -		if (!kproc->rmem[i].cpu_addr) {
> -			dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
> -				i + 1, &rmem->base, &rmem->size);
> -			ret = -ENOMEM;
> -			goto unmap_rmem;
> -		}
> -
> -		dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
> -			i + 1, &kproc->rmem[i].bus_addr,
> -			kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
> -			kproc->rmem[i].dev_addr);
> -	}
> -	kproc->num_rmems = num_rmems;
> -
> -	return 0;
> -
> -unmap_rmem:
> -	for (i--; i >= 0; i--)
> -		iounmap(kproc->rmem[i].cpu_addr);
> -	kfree(kproc->rmem);
> -release_rmem:
> -	of_reserved_mem_device_release(kproc->dev);
> -	return ret;
> -}
> -
> -static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
> -{
> -	int i;
> -
> -	for (i = 0; i < kproc->num_rmems; i++)
> -		iounmap(kproc->rmem[i].cpu_addr);
> -	kfree(kproc->rmem);
> -
> -	of_reserved_mem_device_release(kproc->dev);
> -}
> -
> -static
> -struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev,
> -					    const struct ti_sci_handle *sci)
> -{
> -	struct ti_sci_proc *tsp;
> -	u32 temp[2];
> -	int ret;
> -
> -	ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids",
> -					 temp, 2);
> -	if (ret < 0)
> -		return ERR_PTR(ret);
> -
> -	tsp = kzalloc(sizeof(*tsp), GFP_KERNEL);
> -	if (!tsp)
> -		return ERR_PTR(-ENOMEM);
> -
> -	tsp->dev = dev;
> -	tsp->sci = sci;
> -	tsp->ops = &sci->ops.proc_ops;
> -	tsp->proc_id = temp[0];
> -	tsp->host_id = temp[1];
> -
> -	return tsp;
> -}
> -
>  static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct device_node *np = dev->of_node;
> -	const struct k3_dsp_dev_data *data;
> -	struct k3_dsp_rproc *kproc;
> +	const struct k3_rproc_dev_data *data;
> +	struct k3_rproc *kproc;
>  	struct rproc *rproc;
>  	const char *fw_name;
>  	bool p_state = false;
> @@ -701,8 +161,8 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  	rproc->has_iommu = false;
>  	rproc->recovery_disabled = true;
>  	if (data->uses_lreset) {
> -		rproc->ops->prepare = k3_dsp_rproc_prepare;
> -		rproc->ops->unprepare = k3_dsp_rproc_unprepare;
> +		rproc->ops->prepare = k3_rproc_prepare;
> +		rproc->ops->unprepare = k3_rproc_unprepare;
>  	}
>  	kproc = rproc->priv;
>  	kproc->rproc = rproc;
> @@ -733,7 +193,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  		goto put_sci;
>  	}
>  
> -	kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci);
> +	kproc->tsp = k3_rproc_of_get_tsp(dev, kproc->ti_sci);
>  	if (IS_ERR(kproc->tsp)) {
>  		dev_err(dev, "failed to construct ti-sci proc control, ret = %d\n",
>  			ret);
> @@ -747,11 +207,11 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  		goto free_tsp;
>  	}
>  
> -	ret = k3_dsp_rproc_of_get_memories(pdev, kproc);
> +	ret = k3_rproc_of_get_memories(pdev, kproc);
>  	if (ret)
>  		goto release_tsp;
>  
> -	ret = k3_dsp_reserved_mem_init(kproc);
> +	ret = k3_reserved_mem_init(kproc);
>  	if (ret) {
>  		dev_err(dev, "reserved memory init failed, ret = %d\n", ret);
>  		goto release_tsp;
> @@ -776,7 +236,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  		rproc->ops->stop = NULL;
>  		rproc->ops->attach = k3_dsp_rproc_attach;
>  		rproc->ops->detach = k3_dsp_rproc_detach;
> -		rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table;
> +		rproc->ops->get_loaded_rsc_table = k3_get_loaded_rsc_table;
>  	} else {
>  		dev_info(dev, "configured DSP for remoteproc mode\n");
>  		/*
> @@ -792,7 +252,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  				goto release_mem;
>  			} else if (ret == 0) {
>  				dev_warn(dev, "local reset is deasserted for device\n");
> -				k3_dsp_rproc_reset(kproc);
> +				k3_rproc_reset(kproc);
>  			}
>  		}
>  	}
> @@ -809,7 +269,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  	return 0;
>  
>  release_mem:
> -	k3_dsp_reserved_mem_exit(kproc);
> +	k3_reserved_mem_exit(kproc);
>  release_tsp:
>  	ret1 = ti_sci_proc_release(kproc->tsp);
>  	if (ret1)
> @@ -827,7 +287,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
>  
>  static int k3_dsp_rproc_remove(struct platform_device *pdev)
>  {
> -	struct k3_dsp_rproc *kproc = platform_get_drvdata(pdev);
> +	struct k3_rproc *kproc = platform_get_drvdata(pdev);
>  	struct rproc *rproc = kproc->rproc;
>  	struct device *dev = &pdev->dev;
>  	int ret;
> @@ -852,43 +312,43 @@ static int k3_dsp_rproc_remove(struct platform_device *pdev)
>  	if (ret)
>  		dev_err(dev, "failed to put ti_sci handle, ret = %d\n", ret);
>  
> -	k3_dsp_reserved_mem_exit(kproc);
> +	k3_reserved_mem_exit(kproc);
>  	rproc_free(kproc->rproc);
>  
>  	return 0;
>  }
>  
> -static const struct k3_dsp_mem_data c66_mems[] = {
> +static const struct k3_rproc_mem_data c66_mems[] = {
>  	{ .name = "l2sram", .dev_addr = 0x800000 },
>  	{ .name = "l1pram", .dev_addr = 0xe00000 },
>  	{ .name = "l1dram", .dev_addr = 0xf00000 },
>  };
>  
>  /* C71x cores only have a L1P Cache, there are no L1P SRAMs */
> -static const struct k3_dsp_mem_data c71_mems[] = {
> +static const struct k3_rproc_mem_data c71_mems[] = {
>  	{ .name = "l2sram", .dev_addr = 0x800000 },
>  	{ .name = "l1dram", .dev_addr = 0xe00000 },
>  };
>  
> -static const struct k3_dsp_mem_data c7xv_mems[] = {
> +static const struct k3_rproc_mem_data c7xv_mems[] = {
>  	{ .name = "l2sram", .dev_addr = 0x800000 },
>  };
>  
> -static const struct k3_dsp_dev_data c66_data = {
> +static const struct k3_rproc_dev_data c66_data = {
>  	.mems = c66_mems,
>  	.num_mems = ARRAY_SIZE(c66_mems),
>  	.boot_align_addr = SZ_1K,
>  	.uses_lreset = true,
>  };
>  
> -static const struct k3_dsp_dev_data c71_data = {
> +static const struct k3_rproc_dev_data c71_data = {
>  	.mems = c71_mems,
>  	.num_mems = ARRAY_SIZE(c71_mems),
>  	.boot_align_addr = SZ_2M,
>  	.uses_lreset = false,
>  };
>  
> -static const struct k3_dsp_dev_data c7xv_data = {
> +static const struct k3_rproc_dev_data c7xv_data = {
>  	.mems = c7xv_mems,
>  	.num_mems = ARRAY_SIZE(c7xv_mems),
>  	.boot_align_addr = SZ_2M,
> -- 
> 2.34.1
>