Re: [PATCH V6 0/5] Add camera clock controller support for SM8550

[Jagadeesh Kona]

On 7/7/2023 9:27 AM, Jagadeesh Kona wrote:
> Add bindings, driver and devicetree node for camera clock controller on
> SM8550.
>
> Changes in v6:
>   - Updated parent map and frequency table of cam_cc_xo_clk_src to use
>     active only source P_BI_TCXO_AO instead of P_BI_TCXO
>
> Changes in v5:
>   - Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's
>   - Used module_platform_driver() instead of subsys_initcall()
>   - Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields
>
> Changes in v4:
>   - Dropped the extra patches added in v2, since the review comments on
>     v3 recommended an alternate solution
>
> Changes in v3:
>   - Squashed 2 extra patches added in v2 into single patch as per review
>     comments
>
> Changes in v2:
>   - Took care of review comments from v1
>       + Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550
>       + Sorted the PLL names in proper order
>       + Updated all PLL configurations to lower case hex
>       + Reused evo ops instead of adding new ops for ole pll
>       + Moved few clocks to separate patch to fix patch too long error
>       + Padded non-zero address part to 8 hex digits in DT change
>   - Added 2 extra patches updating .l config value across chipsets to
>     include CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L
>     field explicitly in clk_lucid_evo_pll_configure().
>
> v1:
>    - Initial CAMCC changes for SM8550
>
> Previous series:
> v5 - https://patchwork.kernel.org/project/linux-clk/list/?series=759863
> v4 - https://patchwork.kernel.org/project/linux-clk/list/?series=755683
> v3 - https://patchwork.kernel.org/project/linux-clk/list/?series=753150
> v2 - https://patchwork.kernel.org/project/linux-clk/list/?series=751058
> v1 - https://patchwork.kernel.org/project/linux-clk/list/?series=749294
>
> Jagadeesh Kona (5):
>    dt-bindings: clock: qcom: Add SM8550 camera clock controller
>    clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
>    clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
>    clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
>    arm64: dts: qcom: sm8550: Add camera clock controller
>
>   .../bindings/clock/qcom,sm8450-camcc.yaml     |    8 +-
>   arch/arm64/boot/dts/qcom/sm8550.dtsi          |   15 +
>   drivers/clk/qcom/Kconfig                      |    7 +
>   drivers/clk/qcom/Makefile                     |    1 +
>   drivers/clk/qcom/camcc-sm8550.c               | 3564 +++++++++++++++++
>   drivers/clk/qcom/clk-alpha-pll.c              |   29 +
>   drivers/clk/qcom/clk-alpha-pll.h              |    2 +
>   include/dt-bindings/clock/qcom,sm8550-camcc.h |  187 +
>   8 files changed, 3811 insertions(+), 2 deletions(-)
>   create mode 100644 drivers/clk/qcom/camcc-sm8550.c
>   create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h

Hi Bjorn,

All patches in this series are in reviewed state, could you please help 
to pick this series in the next release? Thanks!

Thanks,
Jagadeesh