Re: [PATCH V10 18/23] mmc: sdhci-uhs2: add request() and others
From: Adrian Hunter
Date: Thu Aug 31 2023 - 04:35:03 EST
On 18/08/23 13:02, Victor Shih wrote:
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> This is a sdhci version of mmc's request operation.
> It covers both UHS-I and UHS-II.
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
> ---
>
> Updates in V10:
> - Use tmode_half_duplex to instead of uhs2_tmode0_flag
> in sdhci_uhs2_set_transfer_mode().
>
> Updates in V9:
> - Modify the annotations in __sdhci_uhs2_send_command().
>
> Updates in V8:
> - Adjust the position of matching brackets in
> sdhci_uhs2_send_command_retry().
> - Modify CameCase definition in __sdhci_uhs2_finish_command().
> - Modify error message in __sdhci_uhs2_finish_command().
> - sdhci_uhs2_send_command_retry() to instead of sdhci_uhs2_send_command()
> in sdhci_uhs2_request().
> - Use sdhci_uhs2_mode() to simplify code in sdhci_uhs2_request_atomic().
> - Add forward declaration for sdhci_send_command().
>
> Updates in V7:
> - Cancel export state of some functions.
> - Remove unnecessary whitespace changes.
>
> Updates in V6:
> - Add uhs2_dev_cmd() to simplify code.
> - Remove unnecessary functions.
> - Cancel export state of some functions.
> - Drop use CONFIG_MMC_DEBUG().
> - Wrap at 100 columns in some functions.
>
> ---
>
> drivers/mmc/host/sdhci-uhs2.c | 412 ++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci.c | 49 ++--
> drivers/mmc/host/sdhci.h | 8 +
> 3 files changed, 454 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 09b86fec9f7b..08fef7174239 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -14,6 +14,8 @@
> #include <linux/module.h>
> #include <linux/iopoll.h>
> #include <linux/bitfield.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/host.h>
>
> #include "sdhci.h"
> #include "sdhci-uhs2.h"
> @@ -24,6 +26,8 @@
> #define SDHCI_UHS2_DUMP(f, x...) \
> pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
>
> +#define UHS2_ARG_IOADR_MASK 0xfff
> +
> void sdhci_uhs2_dump_regs(struct sdhci_host *host)
> {
> if (!(sdhci_uhs2_mode(host)))
> @@ -58,6 +62,11 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
> * *
> \*****************************************************************************/
>
> +static inline u16 uhs2_dev_cmd(struct mmc_command *cmd)
> +{
> + return be16_to_cpu((__be16)cmd->uhs2_cmd->arg) & UHS2_ARG_IOADR_MASK;
> +}
> +
> static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc,
> struct regulator *supply,
> unsigned short vdd_bit)
> @@ -446,6 +455,408 @@ static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
> return err;
> }
>
> +/*****************************************************************************\
> + * *
> + * Core functions *
> + * *
> +\*****************************************************************************/
> +
> +static void sdhci_uhs2_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + struct mmc_data *data = cmd->data;
> +
> + sdhci_initialize_data(host, data);
> +
> + sdhci_prepare_dma(host, data);
> +
> + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE);
> + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT);
> +}
> +
> +static void sdhci_uhs2_finish_data(struct sdhci_host *host)
> +{
> + struct mmc_data *data = host->data;
> +
> + __sdhci_finish_data_common(host);
> +
> + __sdhci_finish_mrq(host, data->mrq);
> +}
> +
> +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + u16 mode;
> + struct mmc_data *data = cmd->data;
> +
> + if (!data) {
> + /* clear Auto CMD settings for no data CMDs */
> + if (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT) {
> + mode = 0;
> + } else {
> + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE);
> + if (cmd->opcode == MMC_STOP_TRANSMISSION || cmd->opcode == MMC_ERASE)
> + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY;
> + else
> + /* send status mode */
> + if (cmd->opcode == MMC_SEND_STATUS)
> + mode = 0;
> + }
> +
> + DBG("UHS2 no data trans mode is 0x%x.\n", mode);
> +
> + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
> + return;
> + }
> +
> + WARN_ON(!host->data);
> +
> + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY;
> + if (data->flags & MMC_DATA_WRITE)
> + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT;
> +
> + if (data->blocks == 1 &&
> + data->blksz != 512 &&
> + cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> + cmd->opcode != MMC_WRITE_BLOCK) {
> + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN;
> + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE;
> + }
> +
> + if (host->flags & SDHCI_REQ_USE_DMA)
> + mode |= SDHCI_UHS2_TRNS_DMA;
> +
> + if ((mmc_card_uhs2_hd_mode(host->mmc)) && cmd->uhs2_cmd->tmode_half_duplex)
Should not check mmc_card_uhs2_hd_mode(host->mmc). The mmc core
must get it right.
Also why is the setting different for different commands?
> + mode |= SDHCI_UHS2_TRNS_2L_HD;
> +
> + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
> +
> + DBG("UHS2 trans mode is 0x%x.\n", mode);
> +}
> +
> +static void __sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + int i, j;
> + int cmd_reg;
> +
> + i = 0;
> + sdhci_writel(host,
> + ((u32)cmd->uhs2_cmd->arg << 16) |
> + (u32)cmd->uhs2_cmd->header,
> + SDHCI_UHS2_CMD_PACKET + i);
> + i += 4;
> +
> + /*
> + * Per spec, payload (config) should be MSB before sending out.
> + * But we don't need convert here because had set payload as
> + * MSB when preparing config read/write commands.
> + */
> + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) {
> + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j), SDHCI_UHS2_CMD_PACKET + i);
> + i += 4;
> + }
> +
> + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4)
> + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i);
> +
> + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len);
> + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++)
> + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i,
> + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i));
> +
> + cmd_reg = FIELD_PREP(SDHCI_UHS2_CMD_PACK_LEN_MASK, cmd->uhs2_cmd->packet_len);
> + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> + cmd_reg |= SDHCI_UHS2_CMD_DATA;
> + if (cmd->opcode == MMC_STOP_TRANSMISSION)
> + cmd_reg |= SDHCI_UHS2_CMD_CMD12;
> +
> + /* UHS2 Native ABORT */
> + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
> + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_TRANS_ABORT))
> + cmd_reg |= SDHCI_UHS2_CMD_TRNS_ABORT;
> +
> + /* UHS2 Native DORMANT */
> + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
> + (uhs2_dev_cmd(cmd) == UHS2_DEV_CMD_GO_DORMANT_STATE))
> + cmd_reg |= SDHCI_UHS2_CMD_DORMANT;
> +
> + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg);
> +
> + sdhci_writew(host, cmd_reg, SDHCI_UHS2_CMD);
> +}
> +
> +static bool sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + int flags;
> + u32 mask;
> + unsigned long timeout;
> +
> + WARN_ON(host->cmd);
> +
> + /* Initially, a command has no error */
> + cmd->error = 0;
> +
> + if (cmd->opcode == MMC_STOP_TRANSMISSION)
> + cmd->flags |= MMC_RSP_BUSY;
> +
> + mask = SDHCI_CMD_INHIBIT;
> +
> + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)
> + return false;
> +
> + host->cmd = cmd;
> + host->data_timeout = 0;
> + if (sdhci_data_line_cmd(cmd)) {
> + WARN_ON(host->data_cmd);
> + host->data_cmd = cmd;
> + __sdhci_uhs2_set_timeout(host);
> + }
> +
> + if (cmd->data)
> + sdhci_uhs2_prepare_data(host, cmd);
> +
> + sdhci_uhs2_set_transfer_mode(host, cmd);
> +
> + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
> + WARN_ONCE(1, "Unsupported response type!\n");
> + /*
> + * This does not happen in practice because 136-bit response
> + * commands never have busy waiting, so rather than complicate
> + * the error path, just remove busy waiting and continue.
> + */
> + cmd->flags &= ~MMC_RSP_BUSY;
> + }
> +
> + if (!(cmd->flags & MMC_RSP_PRESENT))
> + flags = SDHCI_CMD_RESP_NONE;
> + else if (cmd->flags & MMC_RSP_136)
> + flags = SDHCI_CMD_RESP_LONG;
> + else if (cmd->flags & MMC_RSP_BUSY)
> + flags = SDHCI_CMD_RESP_SHORT_BUSY;
> + else
> + flags = SDHCI_CMD_RESP_SHORT;
> +
> + if (cmd->flags & MMC_RSP_CRC)
> + flags |= SDHCI_CMD_CRC;
> + if (cmd->flags & MMC_RSP_OPCODE)
> + flags |= SDHCI_CMD_INDEX;
> +
> + timeout = jiffies;
> + if (host->data_timeout)
> + timeout += nsecs_to_jiffies(host->data_timeout);
> + else if (!cmd->data && cmd->busy_timeout > 9000)
> + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
> + else
> + timeout += 10 * HZ;
> + sdhci_mod_timer(host, cmd->mrq, timeout);
> +
> + __sdhci_uhs2_send_command(host, cmd);
> +
> + return true;
> +}
> +
> +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host,
> + struct mmc_command *cmd,
> + unsigned long flags)
> + __releases(host->lock)
> + __acquires(host->lock)
> +{
> + struct mmc_command *deferred_cmd = host->deferred_cmd;
> + int timeout = 10; /* Approx. 10 ms */
> + bool present;
> +
> + while (!sdhci_uhs2_send_command(host, cmd)) {
> + if (!timeout--) {
> + pr_err("%s: Controller never released inhibit bit(s).\n",
> + mmc_hostname(host->mmc));
> + sdhci_dumpregs(host);
> + cmd->error = -EIO;
> + return false;
> + }
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + usleep_range(1000, 1250);
> +
> + present = host->mmc->ops->get_cd(host->mmc);
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + /* A deferred command might disappear, handle that */
> + if (cmd == deferred_cmd && cmd != host->deferred_cmd)
> + return true;
> +
> + if (sdhci_present_error(host, cmd, present))
> + return false;
> + }
> +
> + if (cmd == host->deferred_cmd)
> + host->deferred_cmd = NULL;
> +
> + return true;
> +}
> +
> +static void __sdhci_uhs2_finish_command(struct sdhci_host *host)
> +{
> + struct mmc_command *cmd = host->cmd;
> + u8 resp;
> + u8 ecode;
> + bool breada0 = 0;
> + int i;
> +
> + if (host->mmc->flags & MMC_UHS2_SD_TRAN) {
> + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2);
> + if (resp & UHS2_RES_NACK_MASK) {
> + ecode = (resp >> UHS2_RES_ECODE_POS) & UHS2_RES_ECODE_MASK;
> + pr_err("%s: NACK response, ECODE=0x%x.\n", mmc_hostname(host->mmc), ecode);
> + }
> + breada0 = 1;
> + }
> +
> + if (cmd->uhs2_resp &&
> + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) {
> + /* Get whole response of some native CCMD, like
> + * DEVICE_INIT, ENUMERATE.
> + */
> + for (i = 0; i < cmd->uhs2_resp_len; i++)
> + cmd->uhs2_resp[i] = sdhci_readb(host, SDHCI_UHS2_RESPONSE + i);
> + } else {
> + /* Get SD CMD response and Payload for some read
> + * CCMD, like INQUIRY_CFG.
> + */
> + /* Per spec (p136), payload field is divided into
> + * a unit of DWORD and transmission order within
> + * a DWORD is big endian.
> + */
> + if (!breada0)
> + sdhci_readl(host, SDHCI_UHS2_RESPONSE);
> + for (i = 4; i < 20; i += 4) {
> + cmd->resp[i / 4 - 1] =
> + (sdhci_readb(host,
> + SDHCI_UHS2_RESPONSE + i) << 24) |
> + (sdhci_readb(host,
> + SDHCI_UHS2_RESPONSE + i + 1)
> + << 16) |
> + (sdhci_readb(host,
> + SDHCI_UHS2_RESPONSE + i + 2)
> + << 8) |
> + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3);
> + }
> + }
> +}
> +
> +static void sdhci_uhs2_finish_command(struct sdhci_host *host)
> +{
> + struct mmc_command *cmd = host->cmd;
> +
> + __sdhci_uhs2_finish_command(host);
> +
> + host->cmd = NULL;
> +
> + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
> + mmc_command_done(host->mmc, cmd->mrq);
> +
> + /*
> + * The host can send and interrupt when the busy state has
> + * ended, allowing us to wait without wasting CPU cycles.
> + * The busy signal uses DAT0 so this is similar to waiting
> + * for data to complete.
> + *
> + * Note: The 1.0 specification is a bit ambiguous about this
> + * feature so there might be some problems with older
> + * controllers.
> + */
> + if (cmd->flags & MMC_RSP_BUSY) {
> + if (cmd->data) {
> + DBG("Cannot wait for busy signal when also doing a data transfer");
> + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
> + cmd == host->data_cmd) {
> + /* Command complete before busy is ended */
> + return;
> + }
> + }
> +
> + /* Processed actual command. */
> + if (host->data && host->data_early)
> + sdhci_uhs2_finish_data(host);
> +
> + if (!cmd->data)
> + __sdhci_finish_mrq(host, cmd->mrq);
> +}
> +
> +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct mmc_command *cmd;
> + unsigned long flags;
> + bool present;
> +
> + if (!(sdhci_uhs2_mode(host))) {
> + sdhci_request(mmc, mrq);
> + return;
> + }
> +
> + mrq->stop = NULL;
> + mrq->sbc = NULL;
> + if (mrq->data)
> + mrq->data->stop = NULL;
> +
> + /* Firstly check card presence */
> + present = mmc->ops->get_cd(mmc);
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + if (sdhci_present_error(host, mrq->cmd, present))
> + goto out_finish;
> +
> + cmd = mrq->cmd;
> +
> + if (!sdhci_uhs2_send_command_retry(host, cmd, flags))
> + goto out_finish;
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + return;
> +
> +out_finish:
> + sdhci_finish_mrq(host, mrq);
> + spin_unlock_irqrestore(&host->lock, flags);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_request);
> +
> +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + struct mmc_command *cmd;
> + unsigned long flags;
> + int ret = 0;
> +
> + if (!sdhci_uhs2_mode(host))
> + return sdhci_request_atomic(mmc, mrq);
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + if (sdhci_present_error(host, mrq->cmd, true)) {
> + sdhci_finish_mrq(host, mrq);
> + goto out_finish;
> + }
> +
> + cmd = mrq->cmd;
> +
> + /*
> + * The HSQ may send a command in interrupt context without polling
> + * the busy signaling, which means we should return BUSY if controller
> + * has not released inhibit bits to allow HSQ trying to send request
> + * again in non-atomic context. So we should not finish this request
> + * here.
> + */
> + if (!sdhci_uhs2_send_command(host, cmd))
> + ret = -EBUSY;
> +
> +out_finish:
> + spin_unlock_irqrestore(&host->lock, flags);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic);
> +
> /*****************************************************************************\
> * *
> * Driver init/exit *
> @@ -569,6 +980,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> host->mmc_host_ops.start_signal_voltage_switch =
> sdhci_uhs2_start_signal_voltage_switch;
> host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
> + host->mmc_host_ops.request = sdhci_uhs2_request;
>
> return 0;
> }
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 57209accbb03..9d031e83b6ba 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -147,10 +147,11 @@ void sdhci_enable_v4_mode(struct sdhci_host *host)
> }
> EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode);
>
> -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd)
> +bool sdhci_data_line_cmd(struct mmc_command *cmd)
> {
> return cmd->data || cmd->flags & MMC_RSP_BUSY;
> }
> +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd);
>
> static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
> {
> @@ -502,14 +503,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host)
>
> #endif
>
> -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
> - unsigned long timeout)
> +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
> + unsigned long timeout)
> {
> if (sdhci_data_line_cmd(mrq->cmd))
> mod_timer(&host->data_timer, timeout);
> else
> mod_timer(&host->timer, timeout);
> }
> +EXPORT_SYMBOL_GPL(sdhci_mod_timer);
>
> static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq)
> {
> @@ -1076,8 +1078,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> __sdhci_set_timeout(host, cmd);
> }
>
> -static void sdhci_initialize_data(struct sdhci_host *host,
> - struct mmc_data *data)
> +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data)
> {
> WARN_ON(host->data);
>
> @@ -1090,6 +1091,7 @@ static void sdhci_initialize_data(struct sdhci_host *host,
> host->data_early = 0;
> host->data->bytes_xfered = 0;
> }
> +EXPORT_SYMBOL_GPL(sdhci_initialize_data);
>
> static inline void sdhci_set_block_info(struct sdhci_host *host,
> struct mmc_data *data)
> @@ -1112,12 +1114,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host,
> }
> }
>
> -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data)
> {
> - struct mmc_data *data = cmd->data;
> -
> - sdhci_initialize_data(host, data);
> -
> if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> struct scatterlist *sg;
> unsigned int length_mask, offset_mask;
> @@ -1202,6 +1200,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> }
>
> sdhci_set_transfer_irqs(host);
> +}
> +EXPORT_SYMBOL_GPL(sdhci_prepare_dma);
> +
> +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + struct mmc_data *data = cmd->data;
> +
> + sdhci_initialize_data(host, data);
> +
> + sdhci_prepare_dma(host, data);
>
> sdhci_set_block_info(host, data);
> }
> @@ -1519,7 +1527,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> WARN_ON(i >= SDHCI_MAX_MRQS);
> }
>
> -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> {
> if (host->cmd && host->cmd->mrq == mrq)
> host->cmd = NULL;
> @@ -1543,15 +1551,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> if (!sdhci_has_requests(host))
> sdhci_led_deactivate(host);
> }
> +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq);
>
> -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> {
> __sdhci_finish_mrq(host, mrq);
>
> queue_work(host->complete_wq, &host->complete_work);
> }
> +EXPORT_SYMBOL_GPL(sdhci_finish_mrq);
>
> -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> +void __sdhci_finish_data_common(struct sdhci_host *host)
> {
> struct mmc_command *data_cmd = host->data_cmd;
> struct mmc_data *data = host->data;
> @@ -1585,6 +1595,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> data->bytes_xfered = 0;
> else
> data->bytes_xfered = data->blksz * data->blocks;
> +}
> +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common);
> +
> +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> +{
> + struct mmc_data *data = host->data;
> +
> + __sdhci_finish_data_common(host);
>
> /*
> * Need to send CMD12 if -
> @@ -1719,8 +1737,8 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> return true;
> }
>
> -static bool sdhci_present_error(struct sdhci_host *host,
> - struct mmc_command *cmd, bool present)
> +bool sdhci_present_error(struct sdhci_host *host,
> + struct mmc_command *cmd, bool present)
> {
> if (!present || host->flags & SDHCI_DEVICE_DEAD) {
> cmd->error = -ENOMEDIUM;
> @@ -1729,6 +1747,7 @@ static bool sdhci_present_error(struct sdhci_host *host,
>
> return false;
> }
> +EXPORT_SYMBOL_GPL(sdhci_present_error);
>
> static bool sdhci_send_command_retry(struct sdhci_host *host,
> struct mmc_command *cmd,
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 03d29423a678..9a2bd319d94c 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -828,6 +828,14 @@ static inline void sdhci_read_caps(struct sdhci_host *host)
> __sdhci_read_caps(host, NULL, NULL, NULL);
> }
>
> +bool sdhci_data_line_cmd(struct mmc_command *cmd);
> +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq, unsigned long timeout);
> +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data);
> +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data);
> +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> +void __sdhci_finish_data_common(struct sdhci_host *host);
> +bool sdhci_present_error(struct sdhci_host *host, struct mmc_command *cmd, bool present);
> u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> unsigned int *actual_clock);
> void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);