[PATCH 1/3] regulator: Add uapi header

[Naresh Solanki]

Add UAPI header for regulator.
Include regulator events in the header.

Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
 include/linux/regulator/consumer.h | 47 +--------------------------
 include/uapi/linux/regulator.h     | 52 ++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+), 46 deletions(-)
 create mode 100644 include/uapi/linux/regulator.h

diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 39b666b40ea6..fb65cf35beca 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -33,6 +33,7 @@
 
 #include <linux/err.h>
 #include <linux/suspend.h>
+#include <uapi/linux/regulator.h>
 
 struct device;
 struct notifier_block;
@@ -84,52 +85,6 @@ struct regulator_dev;
 #define REGULATOR_MODE_IDLE			0x4
 #define REGULATOR_MODE_STANDBY			0x8
 
-/*
- * Regulator notifier events.
- *
- * UNDER_VOLTAGE  Regulator output is under voltage.
- * OVER_CURRENT   Regulator output current is too high.
- * REGULATION_OUT Regulator output is out of regulation.
- * FAIL           Regulator output has failed.
- * OVER_TEMP      Regulator over temp.
- * FORCE_DISABLE  Regulator forcibly shut down by software.
- * VOLTAGE_CHANGE Regulator voltage changed.
- *                Data passed is old voltage cast to (void *).
- * DISABLE        Regulator was disabled.
- * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
- *                      Data passed is "struct pre_voltage_change_data"
- * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
- *                      Data passed is old voltage cast to (void *).
- * PRE_DISABLE    Regulator is about to be disabled
- * ABORT_DISABLE  Regulator disable failed for some reason
- *
- * NOTE: These events can be OR'ed together when passed into handler.
- */
-
-#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
-#define REGULATOR_EVENT_OVER_CURRENT		0x02
-#define REGULATOR_EVENT_REGULATION_OUT		0x04
-#define REGULATOR_EVENT_FAIL			0x08
-#define REGULATOR_EVENT_OVER_TEMP		0x10
-#define REGULATOR_EVENT_FORCE_DISABLE		0x20
-#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
-#define REGULATOR_EVENT_DISABLE			0x80
-#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
-#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
-#define REGULATOR_EVENT_PRE_DISABLE		0x400
-#define REGULATOR_EVENT_ABORT_DISABLE		0x800
-#define REGULATOR_EVENT_ENABLE			0x1000
-/*
- * Following notifications should be emitted only if detected condition
- * is such that the HW is likely to still be working but consumers should
- * take a recovery action to prevent problems esacalating into errors.
- */
-#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN	0x2000
-#define REGULATOR_EVENT_OVER_CURRENT_WARN	0x4000
-#define REGULATOR_EVENT_OVER_VOLTAGE_WARN	0x8000
-#define REGULATOR_EVENT_OVER_TEMP_WARN		0x10000
-#define REGULATOR_EVENT_WARN_MASK		0x1E000
-
 /*
  * Regulator errors that can be queried using regulator_get_error_flags
  *
diff --git a/include/uapi/linux/regulator.h b/include/uapi/linux/regulator.h
new file mode 100644
index 000000000000..d5f94a301841
--- /dev/null
+++ b/include/uapi/linux/regulator.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __UAPI_LINUX_REGULATOR_CONSUMER_H_
+#define __UAPI_LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
+ *                Data passed is old voltage cast to (void *).
+ * DISABLE        Regulator was disabled.
+ * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
+ *                      Data passed is "struct pre_voltage_change_data"
+ * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
+ *                      Data passed is old voltage cast to (void *).
+ * PRE_DISABLE    Regulator is about to be disabled
+ * ABORT_DISABLE  Regulator disable failed for some reason
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE			0x80
+#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
+#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
+#define REGULATOR_EVENT_PRE_DISABLE		0x400
+#define REGULATOR_EVENT_ABORT_DISABLE		0x800
+#define REGULATOR_EVENT_ENABLE			0x1000
+/*
+ * Following notifications should be emitted only if detected condition
+ * is such that the HW is likely to still be working but consumers should
+ * take a recovery action to prevent problems esacalating into errors.
+ */
+#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN	0x2000
+#define REGULATOR_EVENT_OVER_CURRENT_WARN	0x4000
+#define REGULATOR_EVENT_OVER_VOLTAGE_WARN	0x8000
+#define REGULATOR_EVENT_OVER_TEMP_WARN		0x10000
+#define REGULATOR_EVENT_WARN_MASK		0x1E000
+
+#endif

base-commit: 35d0d2350d774fecf596cfb2fb050559fe5e1850
-- 
2.41.0