[PATCH] ata: libata: add workaround to flip LPM during suspend/resume
From: Koba Ko
Date: Thu Aug 31 2023 - 15:08:39 EST
Due to TigerLake/Adler Lake AHCI controller's LPM regression,
can't apply LPM on TigerLake/AdlerLake AHCI controller.
Add a workaround to flip LPM during suspend/resume.
When suspneding, apply LPM on TigerLake/AdlerLake AHCI.
Restore it to target_lpm_policy after resuming.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217775
Signed-off-by: Koba Ko <koba.ko@xxxxxxxxxxxxx>
---
drivers/ata/ahci.c | 29 +++++++++++++++++++++++++++++
drivers/ata/libata-eh.c | 8 ++++++++
include/linux/libata.h | 1 +
3 files changed, 38 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 02503e903e4a8..5c9196cd2c738 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -95,6 +95,8 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
#ifdef CONFIG_PM
static int ahci_pci_device_runtime_suspend(struct device *dev);
static int ahci_pci_device_runtime_resume(struct device *dev);
+static int ahci_intel_port_suspend(struct ata_port *ap, pm_message_t mesg);
+static int ahci_intel_port_resume(struct ata_port *ap);
#ifdef CONFIG_PM_SLEEP
static int ahci_pci_device_suspend(struct device *dev);
static int ahci_pci_device_resume(struct device *dev);
@@ -1025,6 +1027,30 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
}
}
+/*
+ * Intel TGL/ADL workaround, when suspending, put port into LPM,
+ * recover to max power after resuming.
+ */
+static void ahci_intel_ahci_workaround(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ int i;
+ static const struct pci_device_id ids[] = {
+ { PCI_VDEVICE(INTEL, 0xa0d3)}, /* Tiger Lake UP{3,4} AHCI */
+ { PCI_VDEVICE(INTEL, 0x7ae2)}, /* Alder Lake AHCI*/
+ {}
+ };
+
+ dev_info(&pdev->dev, "enabling Intel AHCI workaround\n");
+
+ if (pci_match_id(ids, pdev)) {
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ap->flags |= ATA_LFLAG_NO_LPM_RECOVER;
+ }
+ }
+}
/*
* Macbook7,1 firmware forcibly disables MCP89 AHCI and changes PCI ID when
@@ -1905,6 +1931,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* apply workaround for ASUS P5W DH Deluxe mainboard */
ahci_p5wdh_workaround(host);
+ /* apply workaround for Intel AHCI */
+ ahci_intel_ahci_workaround(host);
+
/* apply gtf filter quirk */
ahci_gtf_filter_workaround(host);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 159ba6ba19ebb..de29e50843f99 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -4000,6 +4000,11 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
int rc = 0;
struct ata_device *dev;
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ ata_eh_set_lpm(&ap->link, ATA_LPM_MED_POWER_WITH_DIPM, &dev);
+ }
+
+
/* are we suspending? */
spin_lock_irqsave(ap->lock, flags);
if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
@@ -4087,6 +4092,9 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
if (ap->ops->port_resume)
ap->ops->port_resume(ap);
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ ata_eh_set_lpm(&ap->link, ap->target_lpm_policy, &dev);
+ }
/* tell ACPI that we're resuming */
ata_acpi_on_resume(ap);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 52d58b13e5eee..e720fed6dbd7f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -147,6 +147,7 @@ enum {
ATA_LFLAG_RST_ONCE = (1 << 9), /* limit recovery to one reset */
ATA_LFLAG_CHANGED = (1 << 10), /* LPM state changed on this link */
ATA_LFLAG_NO_DEBOUNCE_DELAY = (1 << 11), /* no debounce delay on link resume */
+ ATA_LFLAG_NO_LPM_RECOVER = (1 << 12), /* disable LPM on this link */
/* struct ata_port flags */
ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */
--
2.34.1