Re: [PATCH v4 1/3] dt-bindings: Add beaglecc1352

[Krzysztof Kozlowski]

On 02/09/2023 20:28, Ayush Singh wrote:
> Add DT bindings for BeagleCC1352 co-processor UART.

This does not look like UART controller.

> 
> The BeaglePlay has a CC1352 co-processor. This co-processor is connected
> to the main AM62 (running Linux) over UART. The CC1352 can run Zephyr
> and other embedded OS. This commit adds DT bindings for the BeagleCC1352

Please do not use "This commit/patch", but imperative mood. See longer
explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> UART, which will allow Linux platform drivers to identify and access this
> device.
> 
> This commit adds serial/beaglecc1352 for identifying this UART. It is
> used by an upcoming gb-beagleplay greybus driver.

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC (and consider --no-git-fallback argument). It might
happen, that command when run on an older kernel, gives you outdated
entries. Therefore please be sure you base your patches on recent Linux
kernel.

> 
> Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
> ---
>  .../bindings/serial/beaglecc1352.yaml         | 25 +++++++++++++++++++

It's not a serial driver. Don't put it in unrelated directory.

>  MAINTAINERS                                   |  6 +++++
>  2 files changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/beaglecc1352.yaml
> 
> diff --git a/Documentation/devicetree/bindings/serial/beaglecc1352.yaml b/Documentation/devicetree/bindings/serial/beaglecc1352.yaml
> new file mode 100644
> index 000000000000..54db630a2a50
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/beaglecc1352.yaml

Missing vendor prefix. Filename should match compatible. Compatible is
not "beaglecc1352"


> @@ -0,0 +1,25 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/beaglecc1352.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BeaglePlay CC1352 serial UART

How is this serial UART? Of what? The SoC? Do not describe interface but
the device.

> +
> +maintainers:
> +  - Ayush Singh <ayushdevel1325@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: beagle,cc1352

No resources? This does not seem useful... Put it then only in trivial
devices if your hardware - hardware, not driver - does not have any
pins, interrupts or other resources.

> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    beaglecc1352 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Best regards,
Krzysztof