Re: [PATCH 2/3] platform/x86: intel_scu_ipc: Check status upon timeout in ipc_wait_for_interrupt()

[Stephen Boyd]

Quoting Andy Shevchenko (2023-08-31 06:58:18)
> On Wed, Aug 30, 2023 at 06:14:02PM -0700, Stephen Boyd wrote:
> > It's possible for the completion in ipc_wait_for_interrupt() to timeout,
> > simply because the interrupt was delayed in being processed. A timeout
> > in itself is not an error. This driver should check the status register
> > upon a timeout to ensure that scheduling or interrupt processing delays
> > don't affect the outcome of the IPC return value.
> >
> >  CPU0                                                   SCU
> >  ----                                                   ---
> >  ipc_wait_for_interrupt()
> >   wait_for_completion_timeout(&scu->cmd_complete)
> >   [TIMEOUT]                                             status[IPC_BUSY]=0
> >
> > Fix this problem by reading the status bit in all cases, regardless of
> > the timeout. If the completion times out, we'll assume the problem was
> > that the IPC_BUSY bit was still set, but if the status bit is cleared in
> > the meantime we know that we hit some scheduling delay and we should
> > just check the error bit.
>
> Makes sense, thanks for fixing this!
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> Also see below.
>
> ...
>
> >  /* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
>
> Not sure if this comment needs to be updated / amended.

Or removed?