[PATCH 3/5] arm64: dts: qcom: qrb2210-rb1: Enable remote processors

[Konrad Dybcio]

Enable the ADSP, MPSS and Wi-Fi. Tighten up the Wi-Fi regulators to
make them compliant with that the chip expects.

The Wi-Fi reports:
qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 0f7c59187896..5f7619518deb 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -134,6 +134,16 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm2290/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm2290/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm2250-regulators";
@@ -373,6 +383,14 @@ &usb_hsphy {
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm2250_l7>;
+	vdd-1.8-xo-supply = <&pm2250_l13>;
+	vdd-1.3-rfa-supply = <&pm2250_l10>;
+	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <38400000>;
 };

-- 
2.42.0