[PATCH 2/2] drm/msm/dp: Remove error message when downstream port not connected

[Stephen Boyd]

Plugging in an Apple dongle without the HDMI cable attached prints out
an error message in the kernel logs when nothing is actually wrong.

   no downstream ports connected

This is because the downstream port for the HDMI connector is not
connected, so the Apple dongle reports that as a zero sink count device.

Cc: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
Cc: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_panel.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 97ba41593820..ae778e1a6fd0 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -156,7 +156,6 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
 	if (drm_dp_is_branch(dp_panel->dpcd)) {
 		count = drm_dp_read_sink_count(panel->aux);
 		if (!count) {
-			DRM_ERROR("no downstream ports connected\n");
 			panel->link->sink_count = 0;
 			return -ENOTCONN;
 		}
-- 
https://chromeos.dev