Re: [PATCH v2 33/34] drm/amd/display: add plane CTM support

[Harry Wentland]

On 2023-08-10 12:03, Melissa Wen wrote:
> Map the plane CTM driver-specific property to DC plane, instead of DC
> stream. The remaining steps to program DPP block are already implemented
> on DC shared-code.
> 
> Signed-off-by: Melissa Wen <mwen@xxxxxxxxxx>
> ---
>  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  1 +
>  .../amd/display/amdgpu_dm/amdgpu_dm_color.c   | 25 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index dfe61c5ed49e..f239410234b3 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -9578,6 +9578,7 @@ static bool should_reset_plane(struct drm_atomic_state *state,
>  		if (dm_old_other_state->degamma_tf != dm_new_other_state->degamma_tf ||
>  		    dm_old_other_state->degamma_lut != dm_new_other_state->degamma_lut ||
>  		    dm_old_other_state->hdr_mult != dm_new_other_state->hdr_mult ||
> +		    dm_old_other_state->ctm != dm_new_other_state->ctm ||
>  		    dm_old_other_state->shaper_lut != dm_new_other_state->shaper_lut ||
>  		    dm_old_other_state->shaper_tf != dm_new_other_state->shaper_tf ||
>  		    dm_old_other_state->lut3d != dm_new_other_state->lut3d ||
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> index 86a918ab82be..7ff329101fd4 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c
> @@ -1158,6 +1158,8 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
>  				      struct dc_plane_state *dc_plane_state)
>  {
>  	struct amdgpu_device *adev = drm_to_adev(crtc->base.state->dev);
> +	struct dm_plane_state *dm_plane_state = to_dm_plane_state(plane_state);
> +	struct drm_color_ctm *ctm = NULL;
>  	struct dc_color_caps *color_caps = NULL;
>  	bool has_crtc_cm_degamma;
>  	int ret;
> @@ -1209,6 +1211,29 @@ int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
>  			return ret;
>  	}
>  
> +	/* Setup CRTC CTM. */
> +	if (dm_plane_state->ctm) {
> +		ctm = (struct drm_color_ctm *)dm_plane_state->ctm->data;
> +
> +		/*
> +		 * So far, if we have both plane and CRTC CTM, plane CTM takes
> +		 * the priority and we discard data for CRTC CTM, as
> +		 * implemented in dcn10_program_gamut_remap().  However, we

Isn't it the opposite? If stream (crtc) has a CTM we program that, only if
stream doesn't have a CTM we program the plane one?

Harry

> +		 * have MPC gamut_remap_matrix from DCN3 family, therefore we
> +		 * can remap MPC programing of the matrix to MPC block and
> +		 * provide support for both DPP and MPC matrix at the same
> +		 * time.
> +		 */
> +		__drm_ctm_to_dc_matrix(ctm, dc_plane_state->gamut_remap_matrix.matrix);
> +
> +		dc_plane_state->gamut_remap_matrix.enable_remap = true;
> +		dc_plane_state->input_csc_color_matrix.enable_adjustment = false;
> +	} else {
> +		/* Bypass CTM. */
> +		dc_plane_state->gamut_remap_matrix.enable_remap = false;
> +		dc_plane_state->input_csc_color_matrix.enable_adjustment = false;
> +	}
> +
>  	return amdgpu_dm_plane_set_color_properties(plane_state,
>  						    dc_plane_state, color_caps);
>  }