[PATCH v1 07/10] arm64: dts: qcom: ipq5332: populate the opp table based on the eFuse

[Varadarajan Narayanan]

IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.

Add support to read the eFuse and populate the OPPs based on it.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 34 +++++++++++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 82761ae..3ca3f34 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -91,11 +91,34 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+		nvmem-cell-names = "speed_bin";
+
+		/*
+		 * Listed all supported CPU frequencies and opp-supported-hw
+		 * values to select CPU frequencies based on the limits fused.
+		 * ------------------------------------------------------------
+		 * Frequency     BIT3   BIT2   BIT1    BIT0    opp-supported-hw
+		 *              1.0GHz 1.2GHz 1.5GHz No Limit
+		 * ------------------------------------------------------------
+		 * 1100000000     1      1      1       1            0xF
+		 * 1500000000     0      0      1       1            0x3
+		 * -----------------------------------------------------------
+		 */
+
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xF>;
+			clock-latency-ns = <200000>;
+		};
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -150,6 +173,11 @@
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu_speed_bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
-- 
2.7.4