In subject:I will update it as suggested.
PCI: qcom-ep: Print D-state name to distinguish D3hot/D3cold
("Update" doesn't give any hint about what the change does.)
On Wed, Aug 02, 2023 at 09:21:20AM +0530, Krishna chaitanya chundru wrote:Yes this is the main change.
Now that the state event is stored as pci_power_t, let's use the PCI helpers/let's use/use/
pci_power_name() to print the state event.
The main change is this, right?
D3 -> D3hot
D4 -> D3cold
I will modify this.Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>Can this check for "state == PCI_D3hot" to be clearer?
---
drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 22545ff..0c69a61 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -583,7 +583,6 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
} else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) {
dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) &
DBI_CON_STATUS_POWER_STATE_MASK;
- dev_dbg(dev, "Received D%d state event\n", dstate);
state = dstate;
if (dstate == 3) {
val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);Not really sure why this needs to be moved (the diff would be clearer
@@ -594,6 +593,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
if (gpiod_get_value(pcie_ep->reset))
state = PCI_D3cold;
}
+ dev_dbg(dev, "Received %s event\n", pci_power_name(state));
if it stayed in the same spot), but it doesn't look like it really
matters.
pci_epc_dstate_notify(pci->ep.epc, state);
} else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
--
2.7.4