[net] net:ethernet:adi:adin1110: Fix forwarding offload

[Ciprian Regus]

Currently, when a new fdb entry is added (with both ports of the
ADIN2111 bridged), the driver configures the MAC filters for the wrong
port, which results in the forwarding being done by the host, and not
actually hardware offloaded.

The ADIN2111 offloads the forwarding by setting filters on the
destination MAC address of incoming frames. Based on these, they may be
routed to the other port. Thus, if a frame has to be forwarded from port
1 to port 2, the required configuration for the ADDR_FILT_UPRn register
should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's
currently the case).

Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Ciprian Regus <ciprian.regus@xxxxxxxxxx>
---
 drivers/net/ethernet/adi/adin1110.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c
index 1c009b485188..ca66b747b7c5 100644
--- a/drivers/net/ethernet/adi/adin1110.c
+++ b/drivers/net/ethernet/adi/adin1110.c
@@ -1387,3 +1387,3 @@ static int adin1110_fdb_add(struct adin1110_port_priv *port_priv,
 	other_port = priv->ports[!port_priv->nr];
-	port_rules = adin1110_port_rules(port_priv, false, true);
+	port_rules = adin1110_port_rules(other_port, false, true);
 	eth_broadcast_addr(mask);
-- 
2.39.2