RE: [RESEND PATCH v3 0/2] change UIC command handling

[Kiwoong Kim]

> > v2 -> v3: rule out the change of polling w/ pmc from this thread.
> > (I'll post the change later)
> > v1 -> v2: remove an unused variable in __ufshcd_send_uic_cmd
> >
> > Kiwoong Kim (2):
> >   ufs: make __ufshcd_send_uic_cmd not wrapped by host_lock
> >   ufs: poll HCS.UCRDY before issuing a UIC command
> 
> Applied to 6.6/scsi-staging, thanks!
> 
> --
> Martin K. Petersen	Oracle Linux Engineering

Hi, Martin

The following patch seems to make trouble because of using
read_poll_timeout.
Its initial version used udelay and after discussion it's been changed.
Could you revert this patch set?

> ufs: poll HCS.UCRDY before issuing a UIC command

[ 4671.226480] [3: kworker/u20:29:17140] BUG: scheduling while atomic:
kworker/u20:29/17140/0x00000002
..
[ 4671.228723] [3: kworker/u20:29:17140]  panic+0x16c/0x388
[ 4671.228745] [3: kworker/u20:29:17140]  check_panic_on_warn+0x60/0x94
[ 4671.228764] [3: kworker/u20:29:17140]  __schedule_bug+0x6c/0x94
[ 4671.228786] [3: kworker/u20:29:17140]  __schedule+0x6f4/0xa64
[ 4671.228806] [3: kworker/u20:29:17140]  schedule+0x7c/0xe8
[ 4671.228824] [3: kworker/u20:29:17140]
schedule_hrtimeout_range_clock+0x98/0x114
[ 4671.228841] [3: kworker/u20:29:17140]  schedule_hrtimeout_range+0x14/0x24
[ 4671.228856] [3: kworker/u20:29:17140]  usleep_range_state+0x60/0x94
[ 4671.228871] [3: kworker/u20:29:17140]  __ufshcd_send_uic_cmd+0xa0/0x1c4
[ 4671.228893] [3: kworker/u20:29:17140]  ufshcd_uic_pwr_ctrl+0x15c/0x390
[ 4671.228908] [3: kworker/u20:29:17140]
ufshcd_uic_hibern8_enter+0x9c/0x25c
[ 4671.228922] [3: kworker/u20:29:17140]
ufshcd_link_state_transition+0x34/0xb0
[ 4671.228939] [3: kworker/u20:29:17140]  __ufshcd_wl_suspend+0x3f0/0x4b4

Thanks you.