Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests

[Damien Le Moal]

On 9/8/23 06:02, Niklas Cassel wrote:
> On Thu, Sep 07, 2023 at 03:43:19PM +0800, kernel test robot wrote:
>>
>>
>> Hello,
>>
>> kernel test robot noticed "kernel_BUG_at_drivers/ata/libata-sff.c" on:
>>
>> commit: d3d099d5c2dd38db84abd96df39f9f0828c16b7b ("[PATCH v4] ata: libata-eh: Honor all EH scheduling requests")
>> url: https://github.com/intel-lab-lkp/linux/commits/linan666-huaweicloud-com/ata-libata-eh-Honor-all-EH-scheduling-requests/20230906-164907
>> base: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git 65d6e954e37872fd9afb5ef3fc0481bb3c2f20f4
>> patch link: https://lore.kernel.org/all/20230906084212.1016634-1-linan666@xxxxxxxxxxxxxxx/
>> patch subject: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
>>
>> in testcase: boot
>>
>> compiler: gcc-12
>> test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> 
> Unfortunately the problem reported by the kernel test robot is very real.
> I could reproduce without too much effort in QEMU.
> 
> The problem is basically that we cannot simply perform a host_eh_scheduled--;
> in ata_std_end_eh().
> 
> ata_std_end_eh() is called at the end of ata_scsi_port_error_handler(),
> so it is called once every time ata_scsi_port_error_handler() is called.
> 
> However, ata_scsi_port_error_handler() will be called by SCSI EH each
> time SCSI wakes up.
> 
> SCSI EH will sleep as long as:
> if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
>                     shost->host_failed != scsi_host_busy(shost)) {
> 	schedule();
> 	continue;
> }
> 
> 
> The methods in libata which we use to trigger EH are:
> 
> 1) ata_std_sched_eh(), which calls scsi_schedule_eh(), which does
> host_eh_scheduled++;
> 
> 2) ata_qc_schedule_eh(), which will end up in scsi_timeout,
> which calls scsi_eh_scmd_add() which does:
> host_failed++;
> 
> 
> So before this patch, setting host_eh_scheduled = 0; in ata_std_end_eh()
> makes us say that works because it only negates the EH scheduled by
> ata_std_sched_eh().
> 
> However, if we do host_eh_scheduled--, then if the EH was triggered by
> ata_qc_schedule_eh(), then host_eh_scheduled will decrease < 0,
> which will trigger SCSI EH to wake up again :)
> 
> We could do something like only decreasing host_eh_scheduled if it is > 0.
> The QCs added to EH using ata_qc_schedule_eh() will be handled by
> ata_eh_finish(), which will iterate over all QCs owned by EH, and will
> either fail or retry each QC. After that scsi_error_handler() has finished
> the call to eh_strategy_handler() (ata_scsi_error()) it will unconditionally
> set host_failed to 0:
> https://github.com/torvalds/linux/blob/v6.5/drivers/scsi/scsi_error.c#L2331-L2337
> 
> So something like this on top of the patch in $subject:
> 
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index 2d5ecd68b7e0..9ab12d7f6d9f 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -952,7 +952,13 @@ EXPORT_SYMBOL_GPL(ata_std_sched_eh);
>   */
>  void ata_std_end_eh(struct ata_port *ap)
>  {
> -       ap->scsi_host->host_eh_scheduled--;
> +       struct Scsi_Host *host = ap->scsi_host;
> +       unsigned long flags;
> +
> +       spin_lock_irqsave(host->host_lock, flags);
> +       if (host->host_eh_scheduled > 0)
> +               host->host_eh_scheduled--;
> +       spin_unlock_irqrestore(host->host_lock, flags);
>  }
>  EXPORT_SYMBOL(ata_std_end_eh);
> 
> 
> With that incremental patch, I can no longer reproduce the crash reported
> by the kernel test robot in my QEMU setup.

I am not confident that playing with host_eh_schedule count is the right
approach. A better solution may be to change the timing of clearing
ATA_PFLAG_EH_PENDING. Right now, this is done on entry to
ata_scsi_port_error_handler(), unconditionally. So ata_eh_reset() should not
need to clear the flag again. If we remove that, then a new interrupt received
after ata_eh_thaw() and setting EH_PENDING would be cought by the retry loop in
ata_scsi_port_error_handler(), which would run again ap->ops->error_handler(ap).

So let's try this fix instead:

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 159ba6ba19eb..d1d081aa0c95 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2807,7 +2807,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
        memset(&link->eh_info, 0, sizeof(link->eh_info));
        if (slave)
                memset(&slave->eh_info, 0, sizeof(link->eh_info));
-       ap->pflags &= ~ATA_PFLAG_EH_PENDING;
        spin_unlock_irqrestore(link->ap->lock, flags);

        if (ata_port_is_frozen(ap))

Li,

Can you please test this ?

> 
> 
> 
> It might be worth mentioning that the race window for the bug that the patch
> in $subject is fixing, should be much smaller after this patch is in:
> https://lore.kernel.org/linux-ide/20230907081710.4946-1-Chloe_Chen@xxxxxxxxxxxxxx/
> 
> Li Nan, perhaps you could see if you can still reproduce your original
> problem with the patch from the ASMedia guys?


> 
> However, even with the ASMedia patch, it should still be theoretically
> possible to get an error irq after ata_eh_reset() has called ahci_thaw(),
> so I suppose that this patch still makes some sense...
> 
> 
> Kind regards,
> Niklas

-- 
Damien Le Moal
Western Digital Research