Re: [PATCH v5 15/17] firmware: scm: Modify only the download bits in TCSR register

[Kathiravan Thirumoorthy]

On 9/10/2023 1:46 AM, Mukesh Ojha wrote:
> Crashdump collection is based on the DLOAD bit of TCSR register.
> To retain other bits, we read the register and modify only the
> DLOAD bit as the other bits have their own significance.
>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>


Poovendhan's signed-off is also required. Please refer [1]

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/process/submitting-patches.rst#n489


> Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
> ---
>   drivers/firmware/qcom_scm.c | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 5ea8fc4fd4e8..eda92f713019 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -5,6 +5,8 @@
>   #include <linux/platform_device.h>
>   #include <linux/init.h>
>   #include <linux/interrupt.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
>   #include <linux/completion.h>
>   #include <linux/cpumask.h>
>   #include <linux/export.h>
> @@ -30,6 +32,10 @@ module_param(download_mode, bool, 0);
>   #define SCM_HAS_IFACE_CLK	BIT(1)
>   #define SCM_HAS_BUS_CLK		BIT(2)
>   
> +#define QCOM_DLOAD_MASK		GENMASK(5, 4)
> +#define QCOM_DLOAD_FULLDUMP	0x1
> +#define QCOM_DLOAD_NODUMP	0x0
> +
>   struct qcom_scm {
>   	struct device *dev;
>   	struct clk *core_clk;
> @@ -444,6 +450,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>   
>   static void qcom_scm_set_download_mode(bool enable)
>   {
> +	u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP;
>   	bool avail;
>   	int ret = 0;
>   
> @@ -453,8 +460,9 @@ static void qcom_scm_set_download_mode(bool enable)
>   	if (avail) {
>   		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
>   	} else if (__scm->dload_mode_addr) {
> -		ret = qcom_scm_io_writel(__scm->dload_mode_addr,
> -				enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
> +		ret = qcom_scm_io_update_field(__scm->dload_mode_addr,
> +					       QCOM_DLOAD_MASK,
> +					       FIELD_PREP(QCOM_DLOAD_MASK, val));
>   	} else {
>   		dev_err(__scm->dev,
>   			"No available mechanism for setting download mode\n");