Re: [PATCH v2] usb: dwc3: core: Avoid resume dwc3 if already suspended in pm resume

[Thinh Nguyen]

Hi,

On Mon, Sep 11, 2023, William Wu wrote:
> If we enable PM runtime auto suspend for dwc3 on rockchip
> platforms (e.g. RK3562), it allows the dwc3 controller to
> enter runtime suspend if usb cable detached and power off
> the power domain of the controller. When system resume, if
> the dwc3 already in runtime suspended, it Shouldn't access
> the dwc3 registers in dwc3_resume() because its power domain
> maybe power off.
> 
> Test on RK3562 tablet, this patch can help to avoid kernel
> panic when accessing the dwc3 registers in dwc3_resume() if
> the dwc3 is in runtime suspended and it's power domain is
> power off.

The controller should be woken up before this step. Can you provide more
detail on what led to this?

e.g. some questions:
Who handles the waking up of the controller? Is it the phy driver? Is
the phy driver not detecting a resume? Or did the resume fail? Does this
occur consistently?

Thanks,
Thinh

> 
> Kernel panic - not syncing: Asynchronous SError Interrupt
> Hardware name: Rockchip RK3562 RK817 TABLET LP4 Board (DT)
> Call trace:
> dump_backtrace.cfi_jt+0x0/0x8
>   dump_stack_lvl+0xc0/0x13c
>   panic+0x174/0x468
>   arm64_serror_panic+0x1b0/0x200
>   do_serror+0x184/0x1e4
>   el1_error+0x94/0x118
>   el1_abort+0x40/0x68
>   el1_sync_handler+0x58/0x88
>   el1_sync+0x8c/0x140
>   dwc3_readl+0x30/0x1a0
>   dwc3_phy_setup+0x38/0x510
>   dwc3_core_init+0x68/0xcd4
>   dwc3_core_init_for_resume+0x10c/0x25c
>   dwc3_resume_common+0x44/0x3d0
>   dwc3_resume+0x5c/0xb8
>   dpm_run_callback+0x70/0x488
>   device_resume+0x250/0x2f8
>   dpm_resume+0x258/0x9dc
> 
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Remove Change-Id.
> 
>  drivers/usb/dwc3/core.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9c6bf054f15d..8274a44f2d6a 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -2185,9 +2185,11 @@ static int dwc3_resume(struct device *dev)
>  
>  	pinctrl_pm_select_default_state(dev);
>  
> -	ret = dwc3_resume_common(dwc, PMSG_RESUME);
> -	if (ret)
> -		return ret;
> +	if (!pm_runtime_suspended(dwc->dev)) {
> +		ret = dwc3_resume_common(dwc, PMSG_RESUME);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	pm_runtime_disable(dev);
>  	pm_runtime_set_active(dev);
> -- 
> 2.17.1
>