[PATCH 5/6] dt-bindings: regulator: qcom,spmi: Document PMA8084

[Stephan Gerhold]

Document the qcom,pma8084-regulators compatible together with the
necessary supply properties to allow interfacing via the hardware
regulator registers directly via SPMI. This is mainly intended for
debugging since the regulators are typically controlled via the RPM
firmware (qcom,rpm-pma8084-regulators compatible).

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 .../bindings/regulator/qcom,spmi-regulator.yaml    | 29 +++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
index fe6898a89ea1..7a1b7d2abbd4 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -25,6 +25,7 @@ properties:
       - qcom,pm8941-regulators
       - qcom,pm8950-regulators
       - qcom,pm8994-regulators
+      - qcom,pma8084-regulators
       - qcom,pmi8994-regulators
       - qcom,pmp8074-regulators
       - qcom,pms405-regulators
@@ -34,7 +35,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
 
 patternProperties:
-  "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+  "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-4])$":
     description: List of regulators and its properties
     type: object
     $ref: regulator.yaml#
@@ -334,6 +335,32 @@ allOf:
       patternProperties:
         "^vdd_s[1-9][0-2]?-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pma8084-regulators
+    then:
+      properties:
+        vdd_l1_l11-supply: true
+        vdd_l2_l3_l4_l27-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l14_l15_l26-supply: true
+        vdd_l8-supply: true
+        vdd_l9_l10_l13_l20_l23_l24-supply: true
+        vdd_l16_l25-supply: true
+        vdd_l17-supply: true
+        vdd_l18-supply: true
+        vdd_l19-supply: true
+        vdd_l21-supply: true
+        vdd_l22-supply: true
+        vdd_lvs1_2-supply: true
+        vdd_lvs3_4-supply: true
+        vdd_5vs1-supply: true
+      patternProperties:
+        "^vdd_s([1-9]|1[0-2])-supply$": true
+
   - if:
       properties:
         compatible:

-- 
2.42.0