Re: [PATCH v2 06/14] arm64: dts: qcom: sdm630: Drop RPM bus clocks

[Krzysztof Kozlowski]

On 12/09/2023 15:31, Konrad Dybcio wrote:
> These clocks are now handled from within the icc framework and are
> no longer registered from within the CCF. Remove them.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 49 +++++++-----------------------------
>  1 file changed, 9 insertions(+), 40 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index ec6003212c4d..f11d2a07508c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -605,9 +605,6 @@ bimc: interconnect@1008000 {
>  			compatible = "qcom,sdm660-bimc";
>  			reg = <0x01008000 0x78000>;
>  			#interconnect-cells = <1>;
> -			clock-names = "bus", "bus_a";
> -			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> -				 <&rpmcc RPM_SMD_BIMC_A_CLK>;

Bindings expect here two clocks, so you miss some bindings patches.

>  		};
>  
>  		restart@10ac000 {
> @@ -619,28 +616,17 @@ cnoc: interconnect@1500000 {
>  			compatible = "qcom,sdm660-cnoc";
>  			reg = <0x01500000 0x10000>;
>  			#interconnect-cells = <1>;
> -			clock-names = "bus", "bus_a";
> -			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
> -				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
>  		};
>  
>  		snoc: interconnect@1626000 {
>  			compatible = "qcom,sdm660-snoc";
>  			reg = <0x01626000 0x7090>;
>  			#interconnect-cells = <1>;
> -			clock-names = "bus", "bus_a";
> -			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> -				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
>  		};
>  
>  		anoc2_smmu: iommu@16c0000 {
>  			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
>  			reg = <0x016c0000 0x40000>;
> -
> -			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> -			assigned-clock-rates = <1000>;
> -			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
> -			clock-names = "bus";

This is also against bindings. After your patch #4, such bus clock (or
other combinations) is still required.


>  			#global-interrupts = <2>;
>  			#iommu-cells = <1>;
>  
> @@ -685,16 +671,12 @@ a2noc: interconnect@1704000 {
>  			compatible = "qcom,sdm660-a2noc";
>  			reg = <0x01704000 0xc100>;
>  			#interconnect-cells = <1>;
> -			clock-names = "bus",
> -				      "bus_a",
> -				      "ipa",
> +			clock-names = "ipa",

And which bindings does this match?

Best regards,
Krzysztof