Re: [PATCH] arm64: dts: qcom: pm8150l: Add wled node

[Konrad Dybcio]

On 13.09.2023 20:55, Danila Tikhonov wrote:
> WLED is used for controlling the backlight on some boards, add the node
> for it.
> 
> Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> index b1686e5777b8..ac08a09c64c2 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
> @@ -132,5 +132,15 @@ pm8150l_lpg: pwm {
>  			status = "disabled";
>  		};
>  
> +		pm8150l_wled: leds@d800 {
> +			compatible = "qcom,pm8150l-wled";
> +			reg = <0xd800>, <0xd900>;
> +			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
> +				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "ovp", "short";
Could somebody confirm the second irq? It looks sane when
checking out similar blocks on older gens, but I have no
reference to confirm it's there on this one.

Konrad