Re: [PATCH 2/2] ARM: dts: aspeed: Minerva: Add Facebook Minerva CMC board

[Yang Chen]

On Wed, Sep 13, 2023 at 6:04 PM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 12/09/2023 16:05, yangchen.openbmc@xxxxxxxxx wrote:
> > From: Yang Chen <yangchen.openbmc@xxxxxxxxx>
> >
> > Add linux device tree entry related to the Minerva Chassis Management
> > Controller (CMC) specific devices connected to the Aspeed SoC (AST2600).
> >
> > Signed-off-by: Yang Chen <yangchen.openbmc@xxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/aspeed/Makefile             |   1 +
> >  .../aspeed-bmc-facebook-minerva-cmc.dts       | 265 ++++++++++++++++++
> >  2 files changed, 266 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts
> >
> > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/
>
>
> > +
> > +&i2c15 {
> > +     status = "okay";
> > +
> > +     eeprom@50 {
> > +             compatible = "atmel,24c128";
> > +             reg = <0x50>;
> > +     };
> > +};
> > +
> > +&adc0 {
> > +     ref_voltage = <2500>;
>
> There is no such property in the bindings.

Hi Krzysztof,

I will change this property to the "aspeed,int-vref-microvolt" which
is defined in the binding that can choose the ADC internal reference
voltage is 1200000 or 2500000 µV, and will add these changes to the v2
patches.

>
> > +     status = "okay";
> > +     pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> > +             &pinctrl_adc2_default &pinctrl_adc3_default
> > +             &pinctrl_adc4_default &pinctrl_adc5_default
> > +             &pinctrl_adc6_default &pinctrl_adc7_default>;
> > +};
> > +
> > +&adc1 {
> > +     ref_voltage = <2500>;
>
> NAK, there is no such property.

I will change this property to the "aspeed,int-vref-microvolt" which
is defined in the binding that can choose the ADC internal reference
voltage is 1200000 or 2500000 µV, and will add these changes to the v2
patches.

Thanks,
Yang Chen