[PATCH] arm64: dts: ti: phycore-am64: Add RTC interrupt pin

[Wadim Egorov]

Wth commit 16b26f602758 ("rtc: rv3028: Use IRQ flags obtained from device
tree if available") we can now use the interrupt pin of the RTC.
Let's add interrupt pin definitions to the SoM RTC.

Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 1c2c8f0daca9..f87f09d83c95 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -126,6 +126,12 @@ AM64X_IOPAD(0x0028, PIN_INPUT, 0)	/* (M17) OSPI0_D7 */
 			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
 		>;
 	};
+
+	rtc_pins_default: rtc-defaults-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0278, PIN_INPUT, 7)	/* (C19) EXTINTn.GPIO1_70 */
+		>;
+	};
 };
 
 &cpsw3g {
@@ -177,6 +183,11 @@ eeprom@50 {
 	i2c_som_rtc: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <70 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 
-- 
2.25.1