Re: [PATCH v2 1/3] ASoC: wm8782: Handle maximum audio rate at runtime

From: Charles Keepax
Date: Thu Sep 14 2023 - 05:44:59 EST


On Thu, Sep 14, 2023 at 09:37:31AM +0000, Charles Keepax wrote:
> On Thu, Sep 14, 2023 at 07:27:03PM +1000, John Watts wrote:
> > On Thu, Sep 14, 2023 at 09:21:07AM +0000, Charles Keepax wrote:
> > > On Thu, Sep 14, 2023 at 03:15:50AM +1000, John Watts wrote:
> > > > The wm8782 supports up to 192kHz audio when pins are set correctly.
> > > > Instead of hardcoding which rates are supported enable them all
> > > > then refer to a max_rate variable at runtime.
> > > >
> > > > Signed-off-by: John Watts <contact@xxxxxxxxxx>
> > > > ---
> > > > +static int wm8782_dai_hw_params(struct snd_pcm_substream *component,
> > > > + struct snd_pcm_hw_params *params,
> > > > + struct snd_soc_dai *dai)
> > > > +{
> > > > + struct wm8782_priv *priv =
> > > > + snd_soc_component_get_drvdata(dai->component);
> > > > +
> > > > + if (params_rate(params) > priv->max_rate)
> > > > + return -EINVAL;
> > > > +
> > > > + return 0;
> > > > +}
> > >
> > > We should be setting this as a constraint in startup, rather
> > > than returning an error in hw_params. That will let user-space
> > > know the supported rates and allow it to resample if necessary.
> >
> > How do you do this? The struct with the rate is statically defined.
> >
>
> You can programmatically add additional constraints, commonly
> this will be done from the startup callback on the DAI. See
> something like arizona_startup in sound/soc/codecs/arizona.c for
> an example, that enables 44.1/48k rates based on clocks but the
> principle should be similar.
>

Although I would also imagine snd_pcm_hw_constraint_minmax is
going to be more appropriate in your case.

Thanks,
Charles