Re: [PATCH 2/3] userfaultfd: UFFDIO_REMAP uABI

From: Suren Baghdasaryan
Date: Thu Sep 14 2023 - 16:58:07 EST


On Thu, Sep 14, 2023 at 12:28 PM Jann Horn <jannh@xxxxxxxxxx> wrote:
>
> On Thu, Sep 14, 2023 at 5:26 PM Suren Baghdasaryan <surenb@xxxxxxxxxx> wrote:
> >
> > From: Andrea Arcangeli <aarcange@xxxxxxxxxx>
> >
> > This implements the uABI of UFFDIO_REMAP.
> >
> > Notably one mode bitflag is also forwarded (and in turn known) by the
> > lowlevel remap_pages method.
> >
> > Signed-off-by: Andrea Arcangeli <aarcange@xxxxxxxxxx>
> > Signed-off-by: Suren Baghdasaryan <surenb@xxxxxxxxxx>
> > ---
> > fs/userfaultfd.c | 49 +++
> > include/linux/rmap.h | 5 +
> > include/linux/userfaultfd_k.h | 17 +
> > include/uapi/linux/userfaultfd.h | 22 ++
> > mm/huge_memory.c | 118 +++++++
> > mm/khugepaged.c | 3 +
> > mm/userfaultfd.c | 586 +++++++++++++++++++++++++++++++
> > 7 files changed, 800 insertions(+)
> >
> > diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
> > index 56eaae9dac1a..7bf64e7541c1 100644
> > --- a/fs/userfaultfd.c
> > +++ b/fs/userfaultfd.c
> > @@ -2027,6 +2027,52 @@ static inline unsigned int uffd_ctx_features(__u64 user_features)
> > return (unsigned int)user_features | UFFD_FEATURE_INITIALIZED;
> > }
> >
> > +static int userfaultfd_remap(struct userfaultfd_ctx *ctx,
> > + unsigned long arg)
> > +{
> > + __s64 ret;
> > + struct uffdio_remap uffdio_remap;
> > + struct uffdio_remap __user *user_uffdio_remap;
> > + struct userfaultfd_wake_range range;
> > +
> > + user_uffdio_remap = (struct uffdio_remap __user *) arg;
> > +
> > + ret = -EFAULT;
> > + if (copy_from_user(&uffdio_remap, user_uffdio_remap,
> > + /* don't copy "remap" last field */
> > + sizeof(uffdio_remap)-sizeof(__s64)))
> > + goto out;
> > +
> > + ret = validate_range(ctx->mm, uffdio_remap.dst, uffdio_remap.len);
> > + if (ret)
> > + goto out;
> > + ret = validate_range(current->mm, uffdio_remap.src, uffdio_remap.len);
> > + if (ret)
> > + goto out;
> > + ret = -EINVAL;
> > + if (uffdio_remap.mode & ~(UFFDIO_REMAP_MODE_ALLOW_SRC_HOLES|
> > + UFFDIO_REMAP_MODE_DONTWAKE))
> > + goto out;
>
> Do you not need mmget_not_zero(ctx->mm) to make sure the MM can't be
> concurrently torn down while remap_pages() is running, similar to what
> the other userfaultfd ioctl handlers do?
>
> > + ret = remap_pages(ctx->mm, current->mm,
> > + uffdio_remap.dst, uffdio_remap.src,
> > + uffdio_remap.len, uffdio_remap.mode);
> > + if (unlikely(put_user(ret, &user_uffdio_remap->remap)))
> > + return -EFAULT;
> > + if (ret < 0)
> > + goto out;
> > + /* len == 0 would wake all */
> > + BUG_ON(!ret);
> > + range.len = ret;
> > + if (!(uffdio_remap.mode & UFFDIO_REMAP_MODE_DONTWAKE)) {
> > + range.start = uffdio_remap.dst;
> > + wake_userfault(ctx, &range);
> > + }
> > + ret = range.len == uffdio_remap.len ? 0 : -EAGAIN;
> > +out:
> > + return ret;
> > +}
> [...]
> > diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> > index 064fbd90822b..c7a9880a1f6a 100644
> > --- a/mm/huge_memory.c
> > +++ b/mm/huge_memory.c
> > @@ -1932,6 +1932,124 @@ int change_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
> > return ret;
> > }
> >
> > +#ifdef CONFIG_USERFAULTFD
> > +/*
> > + * The PT lock for src_pmd and the mmap_lock for reading are held by
> > + * the caller, but it must return after releasing the
> > + * page_table_lock. We're guaranteed the src_pmd is a pmd_trans_huge
> > + * until the PT lock of the src_pmd is released. Just move the page
> > + * from src_pmd to dst_pmd if possible. Return zero if succeeded in
> > + * moving the page, -EAGAIN if it needs to be repeated by the caller,
> > + * or other errors in case of failure.
> > + */
> > +int remap_pages_huge_pmd(struct mm_struct *dst_mm,
> > + struct mm_struct *src_mm,
> > + pmd_t *dst_pmd, pmd_t *src_pmd,
> > + pmd_t dst_pmdval,
> > + struct vm_area_struct *dst_vma,
> > + struct vm_area_struct *src_vma,
> > + unsigned long dst_addr,
> > + unsigned long src_addr)
> > +{
> > + pmd_t _dst_pmd, src_pmdval;
> > + struct page *src_page;
> > + struct anon_vma *src_anon_vma, *dst_anon_vma;
> > + spinlock_t *src_ptl, *dst_ptl;
> > + pgtable_t pgtable;
> > + struct mmu_notifier_range range;
> > +
> > + src_pmdval = *src_pmd;
> > + src_ptl = pmd_lockptr(src_mm, src_pmd);
> > +
> > + BUG_ON(!pmd_trans_huge(src_pmdval));
> > + BUG_ON(!pmd_none(dst_pmdval));
>
> Why can we assert that pmd_none(dst_pmdval) is true here? Can we not
> have concurrent faults (or userfaultfd operations) populating that
> PMD?
>
> > + BUG_ON(!spin_is_locked(src_ptl));
> > + mmap_assert_locked(src_mm);
> > + mmap_assert_locked(dst_mm);
> > + BUG_ON(src_addr & ~HPAGE_PMD_MASK);
> > + BUG_ON(dst_addr & ~HPAGE_PMD_MASK);
> > +
> > + src_page = pmd_page(src_pmdval);
> > + BUG_ON(!PageHead(src_page));
> > + BUG_ON(!PageAnon(src_page));
> > + if (unlikely(page_mapcount(src_page) != 1)) {
> > + spin_unlock(src_ptl);
> > + return -EBUSY;
> > + }
> > +
> > + get_page(src_page);
> > + spin_unlock(src_ptl);
> > +
> > + mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, src_mm, src_addr,
> > + src_addr + HPAGE_PMD_SIZE);
> > + mmu_notifier_invalidate_range_start(&range);
> > +
> > + /* block all concurrent rmap walks */
> > + lock_page(src_page);
> > +
> > + /*
> > + * split_huge_page walks the anon_vma chain without the page
> > + * lock. Serialize against it with the anon_vma lock, the page
> > + * lock is not enough.
> > + */
> > + src_anon_vma = folio_get_anon_vma(page_folio(src_page));
> > + if (!src_anon_vma) {
> > + unlock_page(src_page);
> > + put_page(src_page);
> > + mmu_notifier_invalidate_range_end(&range);
> > + return -EAGAIN;
> > + }
> > + anon_vma_lock_write(src_anon_vma);
> > +
> > + dst_ptl = pmd_lockptr(dst_mm, dst_pmd);
> > + double_pt_lock(src_ptl, dst_ptl);
> > + if (unlikely(!pmd_same(*src_pmd, src_pmdval) ||
> > + !pmd_same(*dst_pmd, dst_pmdval) ||
> > + page_mapcount(src_page) != 1)) {
> > + double_pt_unlock(src_ptl, dst_ptl);
> > + anon_vma_unlock_write(src_anon_vma);
> > + put_anon_vma(src_anon_vma);
> > + unlock_page(src_page);
> > + put_page(src_page);
> > + mmu_notifier_invalidate_range_end(&range);
> > + return -EAGAIN;
> > + }
> > +
> > + BUG_ON(!PageHead(src_page));
> > + BUG_ON(!PageAnon(src_page));
> > + /* the PT lock is enough to keep the page pinned now */
> > + put_page(src_page);
> > +
> > + dst_anon_vma = (void *) dst_vma->anon_vma + PAGE_MAPPING_ANON;
> > + WRITE_ONCE(src_page->mapping, (struct address_space *) dst_anon_vma);
> > + WRITE_ONCE(src_page->index, linear_page_index(dst_vma, dst_addr));
> > +
> > + if (!pmd_same(pmdp_huge_clear_flush(src_vma, src_addr, src_pmd),
> > + src_pmdval))
> > + BUG_ON(1);
>
> I'm not sure we can assert that the PMDs are exactly equal; the CPU
> might have changed the A/D bits under us?
>
> > + _dst_pmd = mk_huge_pmd(src_page, dst_vma->vm_page_prot);
> > + _dst_pmd = maybe_pmd_mkwrite(pmd_mkdirty(_dst_pmd), dst_vma);
> > + set_pmd_at(dst_mm, dst_addr, dst_pmd, _dst_pmd);
> > +
> > + pgtable = pgtable_trans_huge_withdraw(src_mm, src_pmd);
> > + pgtable_trans_huge_deposit(dst_mm, dst_pmd, pgtable);
>
> Are we allowed to move page tables between mm_structs on all
> architectures? The first example I found that looks a bit dodgy,
> looking through various architectures' pte_alloc_one(), is s390's
> page_table_alloc() which looks like page tables are tied to per-MM
> lists sometimes.
> If that's not allowed, we might have to allocate a new deposit table
> and free the old one or something like that.
>
> > + if (dst_mm != src_mm) {
> > + add_mm_counter(dst_mm, MM_ANONPAGES, HPAGE_PMD_NR);
> > + add_mm_counter(src_mm, MM_ANONPAGES, -HPAGE_PMD_NR);
> > + }
> > + double_pt_unlock(src_ptl, dst_ptl);
> > +
> > + anon_vma_unlock_write(src_anon_vma);
> > + put_anon_vma(src_anon_vma);
> > +
> > + /* unblock rmap walks */
> > + unlock_page(src_page);
> > +
> > + mmu_notifier_invalidate_range_end(&range);
> > + return 0;
> > +}
> > +#endif /* CONFIG_USERFAULTFD */
> > +
> > /*
> > * Returns page table lock pointer if a given pmd maps a thp, NULL otherwise.
> > *
> [...]
> > diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
> > index 96d9eae5c7cc..0cca60dfa8f8 100644
> > --- a/mm/userfaultfd.c
> > +++ b/mm/userfaultfd.c
> [...]
> > +ssize_t remap_pages(struct mm_struct *dst_mm, struct mm_struct *src_mm,
> > + unsigned long dst_start, unsigned long src_start,
> > + unsigned long len, __u64 mode)
> > +{
> [...]
> > +
> > + if (pgprot_val(src_vma->vm_page_prot) !=
> > + pgprot_val(dst_vma->vm_page_prot))
> > + goto out;
>
> Does this check intentionally allow moving pages from a
> PROT_READ|PROT_WRITE anonymous private VMA into a PROT_READ anonymous
> private VMA (on architectures like x86 and arm64 where CoW memory has
> the same protection flags as read-only memory), but forbid moving them
> from a PROT_READ|PROT_EXEC VMA into a PROT_READ VMA? I think this
> check needs at least a comment to explain what's going on here.
>
> > + /* only allow remapping if both are mlocked or both aren't */
> > + if ((src_vma->vm_flags & VM_LOCKED) ^ (dst_vma->vm_flags & VM_LOCKED))
> > + goto out;
> > +
> > + /*
> > + * Be strict and only allow remap_pages if either the src or
> > + * dst range is registered in the userfaultfd to prevent
> > + * userland errors going unnoticed. As far as the VM
> > + * consistency is concerned, it would be perfectly safe to
> > + * remove this check, but there's no useful usage for
> > + * remap_pages ouside of userfaultfd registered ranges. This
> > + * is after all why it is an ioctl belonging to the
> > + * userfaultfd and not a syscall.
> > + *
> > + * Allow both vmas to be registered in the userfaultfd, just
> > + * in case somebody finds a way to make such a case useful.
> > + * Normally only one of the two vmas would be registered in
> > + * the userfaultfd.
> > + */
> > + if (!dst_vma->vm_userfaultfd_ctx.ctx &&
> > + !src_vma->vm_userfaultfd_ctx.ctx)
> > + goto out;
> > +
> > + /*
> > + * FIXME: only allow remapping across anonymous vmas,
> > + * tmpfs should be added.
> > + */
> > + if (src_vma->vm_ops || dst_vma->vm_ops)
> > + goto out;
>
> I don't think it's okay to check for anonymous VMAs by checking
> ->vm_ops. There are some weird drivers whose ->mmap helpers don't set
> ->vm_ops and instead just shove all the necessary PTEs into the VMA
> right on ->mmap, so I think they end up with ->vm_ops==NULL. For
> example, kcov_mmap() looks that way. I'm not sure how common this is.
>
> Though, uuuuuh, I guess if that's true, the existing
> vma_is_anonymous() is broken, since that also just checks ->vm_ops?
> I'm not sure what the consequences of that would be... Either way,
> vma_is_anonymous() might be the better way to check for anonymous VMAs
> here, and someone should figure out whether vma_is_anonymous() needs
> to be fixed.
>
> > + /*
> > + * Ensure the dst_vma has a anon_vma or this page
> > + * would get a NULL anon_vma when moved in the
> > + * dst_vma.
> > + */
> > + err = -ENOMEM;
> > + if (unlikely(anon_vma_prepare(dst_vma)))
> > + goto out;
> > +
> > + for (src_addr = src_start, dst_addr = dst_start;
> > + src_addr < src_start + len;) {
> > + spinlock_t *ptl;
> > + pmd_t dst_pmdval;
> > +
> > + BUG_ON(dst_addr >= dst_start + len);
> > + src_pmd = mm_find_pmd(src_mm, src_addr);
>
> (this would blow up pretty badly if we could have transparent huge PUD
> in the region but I think that's limited to file VMAs so it's fine as
> it currently is)
>
> > + if (unlikely(!src_pmd)) {
> > + if (!(mode & UFFDIO_REMAP_MODE_ALLOW_SRC_HOLES)) {
> > + err = -ENOENT;
> > + break;
> > + }
> > + src_pmd = mm_alloc_pmd(src_mm, src_addr);
> > + if (unlikely(!src_pmd)) {
> > + err = -ENOMEM;
> > + break;
> > + }
> > + }
> > + dst_pmd = mm_alloc_pmd(dst_mm, dst_addr);
> > + if (unlikely(!dst_pmd)) {
> > + err = -ENOMEM;
> > + break;
> > + }
> > +
> > + dst_pmdval = pmdp_get_lockless(dst_pmd);
> > + /*
> > + * If the dst_pmd is mapped as THP don't
> > + * override it and just be strict.
> > + */
> > + if (unlikely(pmd_trans_huge(dst_pmdval))) {
> > + err = -EEXIST;
> > + break;
> > + }
>
> This check is racy because the dst_pmd can still change at this point,
> from previously pointing to a zeroed PMD to now pointing to a
> hugepage, right? And we rely on remap_pages_pte() and
> remap_pages_huge_pmd() to recheck for that?
> If yes, maybe add a comment noting this and explaining why we want this check.
>
> > + ptl = pmd_trans_huge_lock(src_pmd, src_vma);
> > + if (ptl) {
> > + /*
> > + * Check if we can move the pmd without
> > + * splitting it. First check the address
> > + * alignment to be the same in src/dst. These
> > + * checks don't actually need the PT lock but
> > + * it's good to do it here to optimize this
> > + * block away at build time if
> > + * CONFIG_TRANSPARENT_HUGEPAGE is not set.
> > + */
> > + if (thp_aligned == -1)
> > + thp_aligned = ((src_addr & ~HPAGE_PMD_MASK) ==
> > + (dst_addr & ~HPAGE_PMD_MASK));
> > + if (!thp_aligned || (src_addr & ~HPAGE_PMD_MASK) ||
>
> This seems overly complicated, the only case when you can move a huge
> PMD is if both addresses are hugepage-aligned and you have enough
> length for one hugepage:
>
> (src_addr & ~HPAGE_PMD_MASK) == 0 && (dst_addr & ~HPAGE_PMD_MASK) == 0
> && (src_start + len - src_addr >= HPAGE_PMD_SIZE).
>
> > + !pmd_none(dst_pmdval) ||
> > + src_start + len - src_addr < HPAGE_PMD_SIZE) {
> > + spin_unlock(ptl);
> > + /* Fall through */
> > + split_huge_pmd(src_vma, src_pmd, src_addr);
> > + } else {
> > + err = remap_pages_huge_pmd(dst_mm,
> > + src_mm,
> > + dst_pmd,
> > + src_pmd,
> > + dst_pmdval,
> > + dst_vma,
> > + src_vma,
> > + dst_addr,
> > + src_addr);
> > + cond_resched();
> > +
> > + if (!err) {
> > + dst_addr += HPAGE_PMD_SIZE;
> > + src_addr += HPAGE_PMD_SIZE;
> > + moved += HPAGE_PMD_SIZE;
> > + }
> > +
> > + if ((!err || err == -EAGAIN) &&
> > + fatal_signal_pending(current))
> > + err = -EINTR;
> > +
> > + if (err && err != -EAGAIN)
> > + break;
> > +
> > + continue;
> > + }
> > + }
> > +
> > + if (pmd_none(*src_pmd)) {
> > + if (!(mode & UFFDIO_REMAP_MODE_ALLOW_SRC_HOLES)) {
> > + err = -ENOENT;
> > + break;
> > + }
> > + if (unlikely(__pte_alloc(src_mm, src_pmd))) {
> > + err = -ENOMEM;
> > + break;
> > + }
> > + }
> > +
> > + if (unlikely(pmd_none(dst_pmdval)) &&
> > + unlikely(__pte_alloc(dst_mm, dst_pmd))) {
>
> Maybe just use pte_alloc() here?
>
> > + err = -ENOMEM;
> > + break;
> > + }
> > +
> > + err = remap_pages_pte(dst_mm, src_mm,
> > + dst_pmd, src_pmd,
> > + dst_vma, src_vma,
> > + dst_addr, src_addr,
> > + mode);
> > +
> > + cond_resched();
> > +
> > + if (!err) {
> > + dst_addr += PAGE_SIZE;
> > + src_addr += PAGE_SIZE;
> > + moved += PAGE_SIZE;
> > + }
> > +
> > + if ((!err || err == -EAGAIN) &&
> > + fatal_signal_pending(current))
> > + err = -EINTR;
> > +
> > + if (err && err != -EAGAIN)
> > + break;
> > + }
> > +
> > +out:
> > + mmap_read_unlock(dst_mm);
> > + if (dst_mm != src_mm)
> > + mmap_read_unlock(src_mm);
> > + BUG_ON(moved < 0);
> > + BUG_ON(err > 0);
> > + BUG_ON(!moved && !err);
> > + return moved ? moved : err;
> > +}
>
> Maybe you could try whether this function would look simpler with a
> shape roughly like:
>
> for (src_addr = ...; src_addr < ...;) {
> unsigned long step_size;
>
> if (hugepage case) {
> if (have to split) {
> split it;
> continue;
> }
> step_size = HPAGE_PMD_SIZE;
> ...
> } else {
> ... 4k case ...
> step_size = PAGE_SIZE;
> }
> ...
> cond_resched();
> if (!err) {
> dst_addr += step_size;
> src_addr += step_size;
> moved += step_size;
> }
> ...
> }

I'll need some time to gather the answers to all your questions and
will reply once I have them ready.
Thanks for reviewing, Jann!