Re: [PATCH v2] i2c: designware: Fix corrupted memory seen in the ISR

[Jarkko Nikula]

On 9/14/23 02:29, Jan Bottorff wrote:
> Errors were happening in the ISR that looked like corrupted
> memory. This was because memory writes from the core enabling
> interrupts were not yet visible to the core running the ISR. The
> kernel log would get the message "i2c_designware APMC0D0F:00:
> controller timed out" during in-band IPMI SSIF stress tests.
>
> Add a write barrier before enabling interrupts to assure data written
> by the current core is visible to all cores before the interrupt fires.
>
> The ARM Barrier Litmus Tests and Cookbook has an example under
> Sending Interrupts and Barriers that matches the usage in this
> driver. That document says a DSB barrier is required.
>
> Signed-off-by: Jan Bottorff <janb@xxxxxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
> Tested-by: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
> ---
>   drivers/i2c/busses/i2c-designware-master.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>