Re: [PATCH V2 4/4] arm64: dts: qcom: ipq5018: Add tsens node

[Krzysztof Kozlowski]

On 15/09/2023 14:15, Sricharan Ramabadhran wrote:
> IPQ5018 has tsens V1.0 IP with 4 sensors.
> There is no RPM, so tsens has to be manually enabled. Adding the tsens
> and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the
> critical temperature being 120'C and action is to reboot. Adding all
> the 4 zones here. 
> 
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  [v2] Fixed node names, order and added qfprom cells for points
>       seperately to use the calibrate_common and squashed thermal_zone
>       nodes here
> 
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..d53aea5342e2 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -93,6 +93,117 @@ soc: soc@0 {
>  		#size-cells = <1>;
>  		ranges = <0 0 0 0xffffffff>;
>  
> +		qfprom: qfprom@a0000 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof