[PATCH v3 5/8] x86/boot: Construct PE/COFF .text section from assembler

[Ard Biesheuvel]

From: Ard Biesheuvel <ardb@xxxxxxxxxx>

Now that the size of the setup block is visible to the assembler, it is
possible to populate the PE/COFF header fields from the asm code
directly, instead of poking the values into the binary using the build
tool. This will make it easier to reorganize the section layout without
having to tweak the build tool in lockstep.

This change has no impact on the resulting bzImage binary.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
---
 arch/x86/boot/header.S      | 22 +++------
 arch/x86/boot/tools/build.c | 47 --------------------
 2 files changed, 7 insertions(+), 62 deletions(-)

diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 34e9b35b827c..2b07bc596c39 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -75,14 +75,12 @@ optional_header:
 	.byte	0x02				# MajorLinkerVersion
 	.byte	0x14				# MinorLinkerVersion
 
-	# Filled in by build.c
-	.long	0				# SizeOfCode
+	.long	setup_size + ZO__end - 0x200	# SizeOfCode
 
 	.long	0				# SizeOfInitializedData
 	.long	0				# SizeOfUninitializedData
 
-	# Filled in by build.c
-	.long	0x0000				# AddressOfEntryPoint
+	.long	setup_size + ZO_efi_pe_entry	# AddressOfEntryPoint
 
 	.long	0x0200				# BaseOfCode
 #ifdef CONFIG_X86_32
@@ -105,10 +103,7 @@ extra_header_fields:
 	.word	0				# MinorSubsystemVersion
 	.long	0				# Win32VersionValue
 
-	#
-	# The size of the bzImage is written in tools/build.c
-	#
-	.long	0				# SizeOfImage
+	.long	setup_size + ZO__end 		# SizeOfImage
 
 	.long	0x200				# SizeOfHeaders
 	.long	0				# CheckSum
@@ -199,18 +194,15 @@ section_table:
 		IMAGE_SCN_MEM_DISCARDABLE	# Characteristics
 #endif
 
-	#
-	# The offset & size fields are filled in by build.c.
-	#
 	.ascii	".text"
 	.byte	0
 	.byte	0
 	.byte	0
-	.long	0
-	.long	0x0				# startup_{32,64}
-	.long	0				# Size of initialized data
+	.long	ZO__end
+	.long	setup_size
+	.long	ZO__edata			# Size of initialized data
 						# on disk
-	.long	0x0				# startup_{32,64}
+	.long	setup_size
 	.long	0				# PointerToRelocations
 	.long	0				# PointerToLineNumbers
 	.word	0				# NumberOfRelocations
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index e792c6c5a634..9712f27e32c1 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -50,10 +50,8 @@ u8 buf[SETUP_SECT_MAX*512];
 #define PECOFF_RELOC_RESERVE 0x20
 #define PECOFF_COMPAT_RESERVE 0x20
 
-static unsigned long efi_pe_entry;
 static unsigned long efi32_pe_entry;
 static unsigned long _edata;
-static unsigned long _end;
 
 /*----------------------------------------------------------------------*/
 
@@ -216,32 +214,6 @@ static void update_pecoff_setup_and_reloc(unsigned int size)
 #endif
 }
 
-static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
-{
-	unsigned int pe_header;
-	unsigned int text_sz = file_sz - text_start;
-	unsigned int bss_sz = _end - text_sz;
-
-	pe_header = get_unaligned_le32(&buf[0x3c]);
-
-	/*
-	 * Size of code: Subtract the size of the first sector (512 bytes)
-	 * which includes the header.
-	 */
-	put_unaligned_le32(file_sz - 512 + bss_sz, &buf[pe_header + 0x1c]);
-
-	/* Size of image */
-	put_unaligned_le32(file_sz + bss_sz, &buf[pe_header + 0x50]);
-
-	/*
-	 * Address of entry point for PE/COFF executable
-	 */
-	put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]);
-
-	update_pecoff_section_header_fields(".text", text_start, text_sz + bss_sz,
-					    text_sz, text_start);
-}
-
 static int reserve_pecoff_reloc_section(int c)
 {
 	/* Reserve 0x20 bytes for .reloc section */
@@ -249,22 +221,9 @@ static int reserve_pecoff_reloc_section(int c)
 	return PECOFF_RELOC_RESERVE;
 }
 
-static void efi_stub_defaults(void)
-{
-	/* Defaults for old kernel */
-#ifdef CONFIG_X86_32
-	efi_pe_entry = 0x10;
-#else
-	efi_pe_entry = 0x210;
-#endif
-}
-
 #else
 
 static inline void update_pecoff_setup_and_reloc(unsigned int size) {}
-static inline void update_pecoff_text(unsigned int text_start,
-				      unsigned int file_sz) {}
-static inline void efi_stub_defaults(void) {}
 
 static inline int reserve_pecoff_reloc_section(int c)
 {
@@ -307,10 +266,8 @@ static void parse_zoffset(char *fname)
 	p = (char *)buf;
 
 	while (p && *p) {
-		PARSE_ZOFS(p, efi_pe_entry);
 		PARSE_ZOFS(p, efi32_pe_entry);
 		PARSE_ZOFS(p, _edata);
-		PARSE_ZOFS(p, _end);
 
 		p = strchr(p, '\n');
 		while (p && (*p == '\r' || *p == '\n'))
@@ -328,8 +285,6 @@ int main(int argc, char ** argv)
 	void *kernel;
 	u32 crc = 0xffffffffUL;
 
-	efi_stub_defaults();
-
 	if (argc != 5)
 		usage();
 	parse_zoffset(argv[3]);
@@ -376,8 +331,6 @@ int main(int argc, char ** argv)
 	kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0);
 	if (kernel == MAP_FAILED)
 		die("Unable to mmap '%s': %m", argv[2]);
-	update_pecoff_text(setup_sectors * 512, i + _edata);
-
 
 	crc = partial_crc32(buf, i, crc);
 	if (fwrite(buf, 1, i, dest) != i)
-- 
2.42.0.459.ge4e396fd5e-goog