Re: [PATCH v3 1/7] drm/msm/dp: tie dp_display_irq_handler() with dp driver

From: Dmitry Baryshkov
Date: Fri Sep 15 2023 - 20:32:12 EST


On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
> Currently the dp_display_irq_handler() is executed at msm_dp_modeset_init()
> which ties irq registration to the DPU device's life cycle, while depending on
> resources that are released as the DP device is torn down. Move register DP
> driver irq handler at dp_display_probe() to have dp_display_irq_handler()
> is tied with DP device.
>
> Changes in v3:
> -- move calling dp_display_irq_handler() to probe

Was there a changelog for the previous reivions? What is the
difference between v1 and v2?

>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 35 +++++++++++++----------------------
> drivers/gpu/drm/msm/dp/dp_display.h | 1 -
> 2 files changed, 13 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 76f1395..c217430 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1193,30 +1193,23 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
> return ret;
> }
>
> -int dp_display_request_irq(struct msm_dp *dp_display)
> +static int dp_display_request_irq(struct dp_display_private *dp)
> {
> int rc = 0;
> - struct dp_display_private *dp;
> -
> - if (!dp_display) {
> - DRM_ERROR("invalid input\n");
> - return -EINVAL;
> - }
> -
> - dp = container_of(dp_display, struct dp_display_private, dp_display);
> + struct device *dev = &dp->pdev->dev;
>
> - dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> if (!dp->irq) {

What is the point in this check?

> - DRM_ERROR("failed to get irq\n");
> - return -EINVAL;
> + dp->irq = platform_get_irq(dp->pdev, 0);
> + if (!dp->irq) {
> + DRM_ERROR("failed to get irq\n");
> + return -EINVAL;
> + }
> }
>
> - rc = devm_request_irq(dp_display->drm_dev->dev, dp->irq,
> - dp_display_irq_handler,
> + rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler,
> IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> if (rc < 0) {
> - DRM_ERROR("failed to request IRQ%u: %d\n",
> - dp->irq, rc);
> + DRM_ERROR("failed to request IRQ%u: %d\n", dp->irq, rc);
> return rc;
> }
>
> @@ -1287,6 +1280,10 @@ static int dp_display_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, &dp->dp_display);
>
> + rc = dp_display_request_irq(dp);
> + if (rc)
> + return rc;

This way the IRQ ends up being enabled in _probe. Are we ready to
handle it here? Is the DP device fully setup at this moment?

> +
> rc = component_add(&pdev->dev, &dp_display_comp_ops);
> if (rc) {
> DRM_ERROR("component add failed, rc=%d\n", rc);
> @@ -1549,12 +1546,6 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
>
> dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
>
> - ret = dp_display_request_irq(dp_display);
> - if (ret) {
> - DRM_ERROR("request_irq failed, ret=%d\n", ret);
> - return ret;
> - }
> -
> ret = dp_display_get_next_bridge(dp_display);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> index 1e9415a..b3c08de 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> @@ -35,7 +35,6 @@ struct msm_dp {
> int dp_display_set_plugged_cb(struct msm_dp *dp_display,
> hdmi_codec_plugged_cb fn, struct device *codec_dev);
> int dp_display_get_modes(struct msm_dp *dp_display);
> -int dp_display_request_irq(struct msm_dp *dp_display);
> bool dp_display_check_video_test(struct msm_dp *dp_display);
> int dp_display_get_test_bpp(struct msm_dp *dp_display);
> void dp_display_signal_audio_start(struct msm_dp *dp_display);
> --
> 2.7.4
>


--
With best wishes
Dmitry