[PATCH] dt-bindings: power: supply: Drop deprecated ab8500-battery

[Sebastian Reichel]

Linus Walleij modified AB8500 to use the generic simple-battery
and samsung,battery bindings. This is an unused leftover that
can be removed.

Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
 .../supply/stericsson,ab8500-battery.txt      | 34 -------------------
 1 file changed, 34 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt

diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
deleted file mode 100644
index ee125cb0e46d..000000000000
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-AB85000 PMIC contains a node, which contains shared
-information about the battery connected to the PMIC.
-The node has no compatible property.
-
-Properties of this node are:
-
-thermistor-on-batctrl:
-	A boolean value indicating thermistor interface	to battery
-
-	Note:
-	'btemp' and 'batctrl' are the pins interfaced for battery temperature
-	measurement, 'btemp' signal is used when NTC(negative temperature
-	coefficient) resister is interfaced external to battery whereas
-	'batctrl' pin is used when NTC resister is internal to battery.
-
-	Example:
-	ab8500_battery: ab8500_battery {
-		thermistor-on-batctrl;
-	};
-	indicates: NTC resister is internal to battery, 'batctrl' is used
-		for thermal measurement.
-
-	The absence of property 'thermal-on-batctrl' indicates
-	NTC resister is external to battery and  'btemp' signal is used
-	for thermal measurement.
-
-battery-type:
-	This shall be the battery manufacturing technology type,
-	allowed types are:
-		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
-	Example:
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-	}
-- 
2.40.1