[PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document

[Ivan Mikhaylov]

The i2c driver with Rsense option for current monitoring.

Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
---
 .../bindings/iio/adc/maxim,max34408.yaml      | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
new file mode 100644
index 000000000000..ae7c6ddb13d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Two- and four-channel current monitors with overcurrent control.
+
+maintainers:
+  - Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
+
+description: |
+  The MAX34408/MAX34409 are two- and four-channel current monitors that are
+  configured and monitored with a standard I2C/SMBus serial interface. Each
+  unidirectional current sensor offers precision high-side operation with a
+  low full-scale sense voltage. The devices automatically sequence through
+  two or four channels and collect the current-sense samples and average them
+  to reduce the effect of impulse noise. The raw ADC samples are compared to
+  user-programmable digital thresholds to indicate overcurrent conditions.
+  Overcurrent conditions trigger a hardware output to provide an immediate
+  indication to shut down any necessary external circuitry.
+
+  Specifications about the devices can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max34408
+      - maxim,max34409
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  maxim,rsense-val-micro-ohms:
+    description:
+      Adjust the Rsense value to monitor higher or lower current levels.
+    enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+    default: 1000
+
+required:
+  - compatible
+  - reg
+  - maxim,rsense-val-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1e {
+              compatible = "maxim,max34409";
+              reg = <0x1e>;
+              maxim,rsense-val-micro-ohms = <1000>;
+        };
+    };
-- 
2.42.0