Re: [PATCH] hwmon: powerz: add support for ChargerLAB KM002C

[Thomas Weißschuh]

On 2023-09-18 12:05:19-0700, Guenter Roeck wrote:
> On Mon, Sep 11, 2023 at 07:44:42AM +0200, Thomas Weißschuh wrote:
> > The KM002C is similar to the KM003C and seems to use the same
> > protocol and firmware.
> > 
> > Reported-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
> > Closes: https://lore.kernel.org/lkml/290ebce4-54f0-8ac1-2a13-cbc806d80d64@xxxxxxxxxxxx/
> > Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> > ---
> > 
> > This patch is based on hwmon-next,
> > commit 80369d9e1f2f ("hwmon: (sch5627) Document behaviour of limit registers").
> > 
> > Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> 
> Applied, but please be more careful with your comments and Signed-off-by:
> tags. There should only be one '---', and one signature. 

Thanks,

the duplicate Signed-off-by is indeed an oversight which I'll
try to avoid in the future.

As for the '---':

Two of them are generated by the 'b4' tool and I added one manually with
the hwmon-next information.
For other subsystems this wasn't an issue so far.

Are these duplicate sections a problem for your personal tooling or is
it affecting something more widespread?

I can try to avoid these issues when sending patches to you specifically
or maybe changes in b4 in general are the correct solution.

Thomas

> > ---
> >  drivers/hwmon/powerz.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > 
> > ---
> > base-commit: 80369d9e1f2f16993ae6d148553c37bf65a209e4
> > change-id: 20230911-powerz-km002c-94afb4d3d645
> > 
> > Best regards,
> > 
> > diff --git a/drivers/hwmon/powerz.c b/drivers/hwmon/powerz.c
> > index 2b9693aee6f6..cfb635f94d66 100644
> > --- a/drivers/hwmon/powerz.c
> > +++ b/drivers/hwmon/powerz.c
> > @@ -254,6 +254,7 @@ static void powerz_disconnect(struct usb_interface *intf)
> >  }
> >  
> >  static const struct usb_device_id powerz_id_table[] = {
> > +	{ USB_DEVICE_INTERFACE_NUMBER(0x5FC9, 0x0061, 0x00) },	/* ChargerLAB POWER-Z KM002C */
> >  	{ USB_DEVICE_INTERFACE_NUMBER(0x5FC9, 0x0063, 0x00) },	/* ChargerLAB POWER-Z KM003C */
> >  	{ }
> >  };