[PATCH v3 05/17] pmdomain: bcm: Move Kconfig options to the pmdomain subsystem

[Ulf Hansson]

The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.

Cc: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Cc: Ray Jui <rjui@xxxxxxxxxxxx>
Cc: Scott Branden <sbranden@xxxxxxxxxxxx>
Cc: <linux-mips@xxxxxxxxxxxxxxx>
Cc: <linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx>
Reviewed-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---

Changes in v3:
	- Dropped the SOC_BCM63XX config altogether.

---
 drivers/pmdomain/Kconfig     |  1 +
 drivers/pmdomain/bcm/Kconfig | 42 +++++++++++++++++++++++++++++
 drivers/soc/bcm/Kconfig      | 51 ------------------------------------
 3 files changed, 43 insertions(+), 51 deletions(-)
 create mode 100644 drivers/pmdomain/bcm/Kconfig

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 482d9e970e14..ddc05d6af100 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -4,5 +4,6 @@ menu "PM Domains"
 source "drivers/pmdomain/actions/Kconfig"
 source "drivers/pmdomain/amlogic/Kconfig"
 source "drivers/pmdomain/apple/Kconfig"
+source "drivers/pmdomain/bcm/Kconfig"
 
 endmenu
diff --git a/drivers/pmdomain/bcm/Kconfig b/drivers/pmdomain/bcm/Kconfig
new file mode 100644
index 000000000000..b28c9f6d256b
--- /dev/null
+++ b/drivers/pmdomain/bcm/Kconfig
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Broadcom PM Domains"
+
+config BCM2835_POWER
+	bool "BCM2835 power domain driver"
+	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+	default y if ARCH_BCM2835
+	select PM_GENERIC_DOMAINS if PM
+	select RESET_CONTROLLER
+	help
+	  This enables support for the BCM2835 power domains and reset
+	  controller.  Any usage of power domains by the Raspberry Pi
+	  firmware means that Linux usage of the same power domain
+	  must be accessed using the RASPBERRYPI_POWER driver
+
+config RASPBERRYPI_POWER
+	bool "Raspberry Pi power domain driver"
+	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+	depends on RASPBERRYPI_FIRMWARE=y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the RPi power domains which can be enabled
+	  or disabled via the RPi firmware.
+
+config BCM_PMB
+	bool "Broadcom PMB (Power Management Bus) driver"
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the Broadcom's PMB (Power Management Bus) that
+	  is used for disabling and enabling SoC devices.
+
+config BCM63XX_POWER
+	bool "BCM63xx power domain driver"
+	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the BCM63xx power domains controller on
+	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endmenu
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index f96906795fa6..1f5577cfd68c 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -1,36 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menu "Broadcom SoC drivers"
 
-config BCM2835_POWER
-	bool "BCM2835 power domain driver"
-	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-	default y if ARCH_BCM2835
-	select PM_GENERIC_DOMAINS if PM
-	select RESET_CONTROLLER
-	help
-	  This enables support for the BCM2835 power domains and reset
-	  controller.  Any usage of power domains by the Raspberry Pi
-	  firmware means that Linux usage of the same power domain
-	  must be accessed using the RASPBERRYPI_POWER driver
-
-config RASPBERRYPI_POWER
-	bool "Raspberry Pi power domain driver"
-	depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
-	depends on RASPBERRYPI_FIRMWARE=y
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the RPi power domains which can be enabled
-	  or disabled via the RPi firmware.
-
-config SOC_BCM63XX
-	bool "Broadcom 63xx SoC drivers"
-	depends on BMIPS_GENERIC || COMPILE_TEST
-	help
-	  Enables drivers for the Broadcom 63xx series of chips.
-	  Drivers can be enabled individually within this menu.
-
-	  If unsure, say N.
-
 config SOC_BRCMSTB
 	bool "Broadcom STB SoC drivers"
 	depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
@@ -42,27 +12,6 @@ config SOC_BRCMSTB
 
 	  If unsure, say N.
 
-config BCM_PMB
-	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
-	default ARCH_BCMBCA
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the Broadcom's PMB (Power Management Bus) that
-	  is used for disabling and enabling SoC devices.
-
-if SOC_BCM63XX
-
-config BCM63XX_POWER
-	bool "BCM63xx power domain driver"
-	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  This enables support for the BCM63xx power domains controller on
-	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
-
-endif # SOC_BCM63XX
-
 source "drivers/soc/bcm/brcmstb/Kconfig"
 
 endmenu
-- 
2.34.1