Re: [PATCH v1 1/1] serial: 8250_dw: Use devm_clk_get_optional_enabled()

[Ilpo Järvinen]

On Tue, 19 Sep 2023, Andy Shevchenko wrote:

> Use devm_clk_get_optional_enabled() to simplify the code.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_dw.c | 27 +++------------------------
>  1 file changed, 3 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index f4cafca1a7da..bdd7ed282061 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -498,11 +498,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>  	}
>  }
>  
> -static void dw8250_clk_disable_unprepare(void *data)
> -{
> -	clk_disable_unprepare(data);
> -}
> -
>  static void dw8250_reset_control_assert(void *data)
>  {
>  	reset_control_assert(data);
> @@ -598,23 +593,15 @@ static int dw8250_probe(struct platform_device *pdev)
>  	device_property_read_u32(dev, "clock-frequency", &p->uartclk);
>  
>  	/* If there is separate baudclk, get the rate from it. */
> -	data->clk = devm_clk_get_optional(dev, "baudclk");
> +	data->clk = devm_clk_get_optional_enabled(dev, "baudclk");
>  	if (data->clk == NULL)
> -		data->clk = devm_clk_get_optional(dev, NULL);
> +		data->clk = devm_clk_get_optional_enabled(dev, NULL);
>  	if (IS_ERR(data->clk))
>  		return PTR_ERR(data->clk);
>  
>  	INIT_WORK(&data->clk_work, dw8250_clk_work_cb);
>  	data->clk_notifier.notifier_call = dw8250_clk_notifier_cb;
>  
> -	err = clk_prepare_enable(data->clk);
> -	if (err)
> -		return dev_err_probe(dev, err, "could not enable optional baudclk\n");
> -
> -	err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->clk);
> -	if (err)
> -		return err;
> -
>  	if (data->clk)
>  		p->uartclk = clk_get_rate(data->clk);
>  
> @@ -622,18 +609,10 @@ static int dw8250_probe(struct platform_device *pdev)
>  	if (!p->uartclk)
>  		return dev_err_probe(dev, -EINVAL, "clock rate not defined\n");
>  
> -	data->pclk = devm_clk_get_optional(dev, "apb_pclk");
> +	data->pclk = devm_clk_get_optional_enabled(dev, "apb_pclk");
>  	if (IS_ERR(data->pclk))
>  		return PTR_ERR(data->pclk);
>  
> -	err = clk_prepare_enable(data->pclk);
> -	if (err)
> -		return dev_err_probe(dev, err, "could not enable apb_pclk\n");
> -
> -	err = devm_add_action_or_reset(dev, dw8250_clk_disable_unprepare, data->pclk);
> -	if (err)
> -		return err;
> -
>  	data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
>  	if (IS_ERR(data->rst))
>  		return PTR_ERR(data->rst);
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>


-- 
 i.