[PATCH] ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use

[Luca Weiss]

Now that the pm7250b.dtsi can be configured to be on a different SID, we
also need to specify it for this dts file. Set it to the SID 2/3 like it
was before commit 8e2d56f64572 ("arm64: dts: qcom: pm7250b: make SID
configurable").

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
index fcf1c51c5e7a..9649c859a2c3 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts
@@ -4,6 +4,10 @@
  */
 /dts-v1/;
 
+/* PM7250B is configured to use SID2/3 */
+#define PM7250B_SID 2
+#define PM7250B_SID1 3
+
 #include "qcom-sdx65.dtsi"
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <arm64/qcom/pmk8350.dtsi>

---
base-commit: 7fc7222d9680366edeecc219c21ca96310bdbc10
change-id: 20230921-pm7250b-sid-fixup-0c35c3c59312

Best regards,
-- 
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>