[PATCH V2 2/4] gpio: sprd: Clear interrupt after set the interrupt type
From: Wenhua Lin
Date: Thu Sep 21 2023 - 16:03:19 EST
The initialization state of the EIC module is a high level trigger.
If it is currently a high level, the interrupt condition is met at
this time, and the EIC interrupt has a latch capability, which will
cause an interrupt to occur after booting. To avoid this, When setting
the EIC interrupt trigger type, clear the interrupt once.
Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx>
---
drivers/gpio/gpio-eic-sprd.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index bfa8a4c7515a..96f1c7fd3988 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -375,29 +375,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
@@ -410,29 +415,34 @@ static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
irq_set_handler_locked(data, handle_level_irq);
break;
default:
--
2.17.1