Re: [PATCH 4/4] dt-bindings: sc16is7xx: convert to YAML

[Hugo Villeneuve]

On Wed, 20 Sep 2023 18:13:10 -0500
Rob Herring <robh@xxxxxxxxxx> wrote:

> 
> On Wed, 20 Sep 2023 11:20:15 -0400, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > 
> > Convert binding from text format to YAML.
> > 
> > Additions to original text binding:
> >   - add rs485 reference.
> > 
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > ---
> >  .../bindings/serial/nxp,sc16is7xx.txt         | 118 ----------------
> >  .../bindings/serial/nxp,sc16is7xx.yaml        | 126 ++++++++++++++++++
> >  2 files changed, 126 insertions(+), 118 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
> >  create mode 100644 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dts:27.13-26: Warning (reg_format): /example-0/serial@51:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dts:37.13-26: Warning (reg_format): /example-0/serial@53:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dts:48.13-26: Warning (reg_format): /example-0/serial@54:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/serial/nxp,sc16is7xx.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

Hi Rob,
will fix it for V2.

I was already using 'make DT_CHECKER_FLAGS=-m dt_binding_check', but I
incorrectly introduced a space between DT_SCHEMA_FILES= and the
filename, and so it was ignored and all schemas were checked, and I lost
the warnings in all the noise. I now have fixed it.

Also, if someone is interested, I was trying to specify multiple files
with DT_SCHEMA_FILES, and I just found out (after analysing the
Makefile) that you need to separate them with the ":" character. It
would be a good thing to add it to the documentation, I could submit a
patch for this if you like.

Thank you,
Hugo.


> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230920152015.1376838-5-hugo@xxxxxxxxxxx
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 
>