Re: [PATCH] dt-bindings: mtd: Add a schema for binman

[Simon Glass]

Hi Krzysztof,

On Fri, 22 Sept 2023 at 01:02, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 21/09/2023 20:45, Simon Glass wrote:
> > Binman[1] is a tool for creating firmware images. It allows you to
> > combine various binaries and place them in an output file.
> >
> > Binman uses a DT schema to describe an image, in enough detail that
> > it can be automatically built from component parts, disassembled,
> > replaced, listed, etc.
> >
> > Images are typically stored in flash, which is why this binding is
> > targeted at mtd. Previous discussion is at [2] [3].
> >
> > [1] https://u-boot.readthedocs.io/en/stable/develop/package/binman.html
> > [2] https://lore.kernel.org/u-boot/20230821180220.2724080-3-sjg@xxxxxxxxxxxx/
> > [3] https://www.spinics.net/lists/devicetree/msg626149.html
> >
> > Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx>
> > ---
> >
> >  .../bindings/mtd/partitions/binman.yaml       | 50 +++++++++++++++
> >  .../bindings/mtd/partitions/binman/entry.yaml | 61 +++++++++++++++++++
> >  .../bindings/mtd/partitions/partitions.yaml   |  1 +
> >  MAINTAINERS                                   |  5 ++
> >  4 files changed, 117 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman.yaml
> >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman/entry.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/partitions/binman.yaml b/Documentation/devicetree/bindings/mtd/partitions/binman.yaml
> > new file mode 100644
> > index 00000000000000..c792d5a37b700a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/partitions/binman.yaml
> > @@ -0,0 +1,50 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2023 Google LLC
> > +
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/partitions/binman.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Binman firmware layout
> > +
> > +maintainers:
> > +  - Simon Glass <sjg@xxxxxxxxxxxx>
> > +
> > +description: |
> > +  The binman node provides a layout for firmware, used when packaging firmware
> > +  from multiple projects. For now it just supports a very simple set of
> > +  features, as a starting point for discussion.
> > +
> > +  Documentation for Binman is available at:
> > +
> > +  https://u-boot.readthedocs.io/en/latest/develop/package/binman.html
> > +
> > +  with the current image-description format at:
> > +
> > +  https://u-boot.readthedocs.io/en/latest/develop/package/binman.html#image-description-format
> > +
> > +properties:
> > +  compatible:
> > +    const: u-boot,binman
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    firmware {
> > +      binman {
> > +        compatible = "u-boot,binman";
> > +
> > +        u-boot {
>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.

Yes this came out of dt-schema and I assumed it was similar. I will rework it.

>
>
> > +          size = <0xa0000>;
> > +        };
> > +
> > +        atf-bl31 {
> > +          offset = <0x100000>;
> > +        };
> > +      };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/mtd/partitions/binman/entry.yaml b/Documentation/devicetree/bindings/mtd/partitions/binman/entry.yaml
> > new file mode 100644
> > index 00000000000000..8003eb4f1a994f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/partitions/binman/entry.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2023 Google LLC
> > +
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/partitions/binman/entry.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Binman entry
> > +
> > +maintainers:
> > +  - Simon Glass <sjg@xxxxxxxxxxxx>
> > +
> > +description: |
> > +  The entry node specifies a single entry in the firmware.
> > +
> > +  Entries have a specific type, such as "u-boot" or "atf-bl31". If the type
> > +  is missing, the name is used as the type.
> > +
> > +  Note: This definition is intended to be hierarchical, so that entries can
> > +  appear in other entries. Schema for that is TBD.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^[-a-z]+(-[0-9]+)?$"
>
> Why do you need this?

It seemed to be needed in dt-schema. I will drop it.
Regards,
Simon