Re: [PATCH v3 4/5] ARM: dts: stm32: add dcmipp support to stm32mp135
From: Laurent Pinchart
Date: Fri Sep 22 2023 - 12:08:10 EST
On Fri, Sep 22, 2023 at 06:02:27PM +0200, Alain Volmat wrote:
> On Tue, Sep 05, 2023 at 12:02:58PM +0300, Laurent Pinchart wrote:
> > On Fri, Sep 01, 2023 at 05:57:23PM +0200, Alain Volmat wrote:
> > > From: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > >
> > > Add dcmipp support to STM32MP135.
> > >
> > > Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > > Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > > ---
> > > arch/arm/boot/dts/st/stm32mp135.dtsi | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > index abf2acd37b4e..beee9ec7ed0d 100644
> > > --- a/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi
> > > @@ -8,5 +8,13 @@
> > >
> > > / {
> > > soc {
> > > + dcmipp: dcmipp@5a000000 {
> > > + compatible = "st,stm32mp13-dcmipp";
> > > + reg = <0x5a000000 0x400>;
> > > + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > > + resets = <&rcc DCMIPP_R>;
> > > + clocks = <&rcc DCMIPP_K>;
> > > + status = "disabled";
> >
> > This needs a port, as it's marked as required in the bindings. You can
> > leave the endpoint out.
>
> I first agreed with your comment but, having done the check (make
> CHECK_DTBS=y ...) this doesn't seem to be required because the dcmipp
> node is kept disabled within our dtsi.
Interesting.
> (it is later on only enabled in dts file which as well have the port
> property).
> Indeed, to check this I changed it to okay and DTC_CHK complained about
> missing port property.
>
> Hence, I'd think that port doesn't have to be added in this dtsi file.
> Would you agree with that ?
I still think the port belongs here, as it's an intrinsic property of
the dcmipp, not a property of the board. Does it cause any issue to add
a port in the .dtsi ?
> > With this fixed,
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >
> > > + };
> > > };
> > > };
--
Regards,
Laurent Pinchart